• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.224-229
• /
• 2019

This study was undertaken to provide correct posture guidance and reference material for sports injury and injury prevention programs, by analyzing body alignment and plantar pressure distribution in high school baseball players. Totally, 32 subjects were enrolled for the study. Body alignment was measured from the trunk imbalance, kyphotic angle, lordotic angle, pelvic tilt, and pelvic torsion. Foot pressure was measured from the left maximum pressure, right maximum pressure, left weight, and right weight. The mean and standard deviation of the measured factors were calculated and tabulated, and the correlation between body alignment and foot pressure distribution was analyzed using Pearson's correlation analysis. All statistical significance levels were set at 0.05. Body alignment and foot pressure distribution show a positive correlation between the lordotic angle of lumbar spine and the left maximum pressure. There was no correlation between trunk imbalance, kyphotic angle, lordotic angle, pelvic tilt, pelvic torsion, and the left·right weight distribution and the left·right maximum pressure of each foot. Results of this study determined that the increase of the lordotic angle of lumbar spine results in more force on one side of the foot, thereby increasing the maximum pressure. We believe our data could be a reference for exercise programs on physical alignment and plantar pressure distribution of athletes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.97-110
• /
• 2007

A laser scanning technique has been attracting much attention as a new technology to acquire location information. This technique might be applicable to a wide range of areas, most notably in geomatics, due to its high accuracy of location and automation of high-density data acquisition. A alignment information extraction system on highway has been developed in this study by utilizing the advantages of the laser scanning technique. The system can accurately interpret the alignment information of highway and can be applied to actual works. To develop the alignment information extraction system on highway, an algorithm that can automatically separate a horizontal alignment into a straight line, a transition curve, and a circular curve was developed. It can increase its efficiency compared to the conventional methods. In addition, an algorithm that can automatically extract design elements of horizontal and vertical alignments of highway was developed and applied to an object highway. This yielded higher practicality with more accurate values compared to those from previous studies on the extraction of design elements of highway alignment. Furthermore, the extracted design elements were used to perform a virtual driving simulation on the object highway. Through this, data were provided for a visual judgment for judging visually whether the topography and structures were harmonized in a three-dimensional manner or not. The study also presents data that can serve as a basis to determine highway surface freezing sections and to analyze three-dimensional sight distance models. Through the establishment of a systematic database for diverse data on highway and the development of web-based operating programs, an efficient highway maintenance can be ensured and also they can provide important information to be used when estimating a highway safety in the future.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.396-408
• /
• 2007

After the Human Genome Project finished the sequencing of a human DNA sequence, the concerns on protein functions are increasing. Since the structures of proteins are conserved in divergent evolution, their functions are determined by their structures rather than by their amino acid sequences. Therefore, if similarities between two protein structures are observed, we could expect them to have common biological functions. So far, a lot of researches on protein structure alignment have been performed. However, most of them use RMSD(Root Mean Square Deviation) as a similarity measure with which it is hard to judge the similarity level of two protein structures intuitively. In addition, they retrieve only one result having the highest alignment score with which it is hard to satisfy various users of different purpose. To overcome these limitations, we propose a novel protein structure alignment algorithm based on MRPD(Maximum of Residue Pair Distance) and SG (Similarity Graph). MRPD is more intuitive similarity measure by which fast tittering of unpromising pairs of protein pairs is possible, and SG is a compact representation method for multiple alignment results with which users can choose the most plausible one among various users' needs by providing multiple alignment results without compromising the time to align protein structures.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.23-39
• /
• 2019

The purpose of the study was to analyze the home economics education experts' and teachers' perception of ways to align instruction with evaluation, based on the 2015 revised technology and home economics curriculum for the purpose of developing the independent living competencies, and to provide examples of alignment in practice. The analysis is based on the data from a Delphi study (10 experts) and a survey of technology and home economics teachers(n=422). The results of survey indicated that experts and teachers perceived the instruction-assessment alignment to be most appropriate for project learning-project assessment, followed by project learning-portfolio assessment, problem solving learning-portfolio assessment, and problem solving learning-project assessment, in order. Based on the survey results, a model of instruction-assessment alignment and a teaching-learing plan were presented, based on 'Development task of life cycle and Life plan' unit. This was considered to be a proper method of instructional alignment for the purpose of developing 'independent living competence' with project-learning/project-assessment. The model focuses on consistency between instruction and evaluation, unity in methods, and the availablility of feedbacks of assessment for the improvement of independent living competencies. In conclusion, this study contributes as foundational information for teaching and learning-assessment alignment. Diverse methods of instruction-evaluation alignment is expected for future research.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.335-353
• /
• 2017

This paper presents the application technique on thrust jacking pressuring of shield TBM in the sharp curved tunnel alignment by model tests. Recently, the application of shield TBM method as mechanized tunnelling is increasing to prevent the vibration and noise problems, which can be occurred in the NATM in the urban area in Korea. However, it is necessary to plan the sharp curved tunnel alignment in order to avoid the building foundation and underground structures, to develop the shield TBM operation technique in the shape curved tunnel alignment. Therefore, the main operation parameters of shield TBM in the curved tunnel alignment are reviewed and analyzed based on the case study and analytical study. The results show that the operation of shield jacking force system is the most important technique in the shape curved tunnel alignment. The simplified scaled model tests are also carried out in order to examine the ground-shield TBM head behaviour. The earth pressures acting on the head of shield TBM are investigated according to two different shield jacking force systems (uniform and un-uniform pressure) and several articulation angles. The results obtained from the model tests are analysed. These results will be very useful to understand the shield TBM head interaction behaviour due to the shield jacking operation technique in the shape curved tunnel alignment, and to develop the operation technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.154-154
• /
• 2006

Samsung Electro Mechanics ink jet has developed ultra high resolution alignment system. The alignment system has been developed for repeatable printing of conductive ink. The resolution of alignment system is 0.5um and the velocity of printing working plate is 1.5m/s. So far repeated printing results included sintering process have over 30um of drop mislocation data. In order to improve line thickness and conductivity of metal line, we need to develop the higher mechanical accurate align system. On the demand, this developed align system has under $1{\sim}2{\mu}m$ mispositioning performance and can measure of mechanical accuracy of inkjet printer, as well as the straightness of jetted drop from inkjet head. There is no kinds limit of substrate and ink to use SEM alignment system. By using this alignment system, we progress two experiment of reiterate printing drop and making conductive line on the glass and photo paper. Optical microscope and 3D profiler has been used for measurement of printed ink.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.210-217
• /
• 2022

In this paper, a study is conducted on the acceptable tolerance of an alignment device to reduce the optical loss caused by the alignment tolerance of a window hermetic optical connector. To increase the transmission distance of optical signals and fiber-optic communication systems, it is necessary to maintain and improve the high optical efficiency of the connectors used to bond optical fibers. In the case of the window hermetic optical connector, the optical system is aligned through an alignment device. At this time, since the two connectors are used together, each component is fixed, and further alignment is impossible. The alignment tolerance of the housing system and pin used to align the optical system of the connector causes optical loss, leading to serious problems in the fiber-optic communication system. Thus, to find the acceptable tolerance required for manufacturing the optical-connector alignment device, tolerance analysis is performed on the components of the optical connector, such as the ball lens and the window. We also implement single-mode and multimode optical-connector systems, respectively. Based on the results, we determine an acceptable tolerance value for the alignment device.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.60-67
• /
• 2022

An Electro-Optical Tracking System (EOTS) is an electric optical system with EO/IR cameras, laser sensors, and an IMU. The EOTS calculates coordinates of targets, using attitude and acceleration measured by the IMU. In particular for an armed aircraft, the performance of the weapon system depends on how quickly and accurately it acquires the target coordinates. The IMU should be operated after alignment is complete, to meet the coordinate accuracy required by the weapon system so the initial stabilization time of the IMU should be reduced, by quickly measuring the attitude and acceleration. Alignment is the process of determining the initial attitude by resolving the attitude error of the IMU, and the IMU of mission equipment such as an airborne EOTS, uses velocity matching based on the velocity from GPS/INS for aircraft navigation. In this paper, a method is presented to improve the transfer alignment performance of the airborne EOTS, by maneuvering aircraft and the mission equipment. First, the performance factor of the alignment was identified, as a heading error through the velocity matching model and simulation results. Then acceleration maneuvers and attitude changes were necessary, to correct the error. As a result of flight tests applied to an EOTS on a OOO aircraft system, the transfer alignment performance was improved as the duration time was decreased, by more than five times when the aircraft accelerated by more than 0.2g and the EOTS was moving until 6.7deg/s.

• The Journal of Korean Physical Therapy
• /
• v.26 no.3
• /
• pp.169-174
• /
• 2014

Purpose: This study demonstrated a postural alignment exercise as conservative management strategy for a woman with excessive thoracic kyphosis presenting decreased chest function, and reports its results. Methods: A 21-year-old woman with thoracic kyphosis presenting limited chest function. The exercise program underwent for 30 min in the intervention phase, which consisted of exercises to improve the strength of back extensor and to stretch anterior chest region. Outcome measures comprised the severity of thoracic kyphosis and chest function (vital capacity [VC], forced expiratory volume in a second [FEV1], and chest expansion length). Results: The thoracic kyphotic angle decreased by 23.6% ($9.38^{\circ}$) and 25.4% ($10.58^{\circ}$) in the intervention and follow-up phases respectively. Also, chest function was improved in the intervention (VC: 3.7% [$0.10{\ell}$], FEV1: 17.1% [$0.39{\ell}$], and chest expansion length: 17.1% [0.96 cm]), and the improvement was maintained during the follow-up phase (VC: 4.8% [$0.13{\ell}$], FEV1: 17.1% [$0.39{\ell}$], and chest expansion length: 64.3% [1.81 cm]). Conclusion: These findings suggest that the postural alignment exercise was favorable for improving chest function of a woman with thoracic kyphosis.