• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.7
• /
• pp.98-104
• /
• 2004

A spacecraft alignment measurement requires highly precise measurement accuracy which is less than ${\pm}0.5^{\circ}$. In general, such an alignment measurement has been performed by using three or more theodolites. However, it contains the latent accuracy error because of a position stability of spacecraft, etc. The new alignment measurement system which consists of a theodoilte, a rotating table and a digital inclinometer has been developed to possibly to possibly reduce the error. This paper describes the concept and methodology of methodology of measurement system. It was found that new measurement system can provide more accurate results than the conventional system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.279-288
• /
• 2011

This paper will discuss the alignment techniques and measurement results of geostationary satellite communication antennas for correct antenna pointing and also the fixtures. To get the best performance in terms of antenna pointing and fixtures, zero G condition have been simulated and laser tracker and theodolite system have been applied. As a result, alignment stability was verified within the tolerance, ${\pm}\;0.25mm$ and ${\pm}\;0.013^{\circ}$ and finally Ka-band deployable antenna alignment has been accomplished within the tolerance, ${\pm}\;0.5mm$ and ${\pm}\;0.015^{\circ}$.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.2
• /
• pp.81-92
• /
• 2013

Purpose : This research was carried out to find how neck exercise program combined with self stretching and muscle strengthening program influences on smart phone addicts with forward head posture. Methods : The subjects of this study were 20 smart phone-addicts with forward head posture and we divided them into 2 groups. The experimental group(10 people) participated in neck exercise program as a intervention for 3 months and the control group(the other 10 people) didn't participate in neck exercise program. Neck exercise program were composed of self stretching and muscle strengthening program. Then we measured cervical alignment with GPS(Global Posture System) and evaluated balance ability with Balance Master ver 7.0 systems. Results : The result were as follows. 1. After the intervention, experimental group were significantly more closed to normal cervical alignment than control group. 2. After the intervention, experimental group increased in dynamic balance ability a little more than control group. Conclusion : Neck exercise program seems to get cervical alignment better and improve balance ability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.460-463
• /
• 2005

We studied the nematic liquid crystal (NLC) alignment capability by the Ultraviolet (UV) alignment method on a a-C:H thin -film , and investigated electro-optical performances of the UV aligned twisted nematic (TN)- liquid crystal display (LCD) with the UV exposure on a-C:H thin film surface. A good LC alignment by UV irradiation on a a-C:H thin -film surface was achieved. Monodomain alignment of the UV aligned TN-LCD can be observed. The good electro-optical (EO)characteristics of the UV aligned TN-LCD was observed with oblique UV exposure on the a-C:H thin film surface for 1min.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.468-470
• /
• 2005

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability makes SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by ion beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is main-tained by the ion beam alignment method on the SiC thin film surface at high annealing temperatures up to 300.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1024-1027
• /
• 2005

By using $45^{\circ}$ obliqued evaporation method with electron beam system, uniformly vertical liquid crystal (LC) alignment was achieved. And a high pretilt angles of about $2.5^{\circ}$ were measured. Also, it was verified that there are no variations of pretilt angle as a function of $SiO_x$ thin film thickness 20 nm and 50 nm. A good LC alignment states were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment by $45^{\circ}$ obliqued electron beam evaporation method on the $SiO_x$ thin film can be achieved.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.274-280
• /
• 2005

The objective of this study Is to investigate the heat transfer performance of plate discrete fin-and-tube heat exchangers with large fin pitch. In this study, twenty-two heat exchangers were tested with a variation of fin pitch, number of tube row, longitudinal tube pitch and fin alignment. Discrete fin type exchangers improved heat transfer performance more than 10% compared to tile continuous fin type heat exchangers. The air-side heat transfer coefficient decreased with a reduction of the fin pitch and an increase of the number of tube row, The staggered fin alignment improved heat transfer performance more than 6% compared to the inline fin alignment. The effect of longitudinal tube pitch was insignificant on the j-factor and experiments found opposite effects on the j-factor with respect to fin alignment. Heat transfer correlations were developed from the measured data for flat plate discrete fin-and-tube heat exchangers with large fin pitch. The correlations yielded good predictions of the measured data with mean deviations of 1,4% and 0.3% for tire inline and staggered tube alignment, respectively.

• KIISE Transactions on Computing Practices
• /
• v.21 no.3
• /
• pp.263-268
• /
• 2015

Malware variations could be defined as malicious executable files that have similar functions but different structures. In order to classify the variations, this paper analyzed sequence alignment, the method used in Bioinformatics. This method found common parts of the Malwares' API call information. This method's performance is dependent on the API call information's length; if the length is too long, the performance should be very poor. Therefore we removed the repeated patterns in API call information in order to improve the performance of sequence alignment analysis, before the method was applied. Finally the similarity between malware was analyzed using sequence alignment. The experimental results with the real malware samples were presented.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.30-34
• /
• 2011

A novel alignment method that can be used for aligning the collimating mirror employed in a monochromator is described. In most of the spectrometer industry, the alignment of optical components such as a focusing mirror, a grating and a collimating mirror has been performed manually so far. In this paper, we use a matchedfilter based image correlation technique for measuring the accurate image position which is used for aligning the collimating mirror. The experimental results show that with the proposed scheme automatic alignment can be completed within 10 seconds.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.211-215
• /
• 2004

Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. The alignment system of micro optical module is a key apparatus for the miniaturization of optical module and the development of optical communication parts with high functionality. In this research, we have developed a system capable of automatic alignment of a $30\mu\textrm{m}$-thick film filter and a lensed fiber in order to improve the speed and losses in the optical fiber-to-filter alignment of optical modules. Using the developed automatic alignment system and silicon optical bench, we have measured optical loss and characteristics of the assembled optical add/drop module before packaging $1{\times}1$ OADM optical module. Whole size of add/drop module was less than $5mm{\times}5mm{\times}1mm$. The measured maximum insertion loss was 0.294㏈ that is below 0.3㏈ which is a standard loss of optical module.