• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.489-490
• /
• 2005

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability makes SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by ion beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is main-tained by the ion beam alignment method on the SiC thin film surface at high annealing temperatures up to 300.

• Journal of Surface Science and Engineering
• /
• v.47 no.6
• /
• pp.347-353
• /
• 2014

We present a synthesis of single-walled carbon nanotubes(SWNTs) for enhancement of parallel-alignment and density using chemical vapor deposition with methane feed gas. As-purchased ST-cut quartz substrates were heat-treated and line-patterned by electron-beam lithography in order to grow SWNTs with parallel alignment. We investigated the effects of various synthesis parameters such as catalyst oxidation, reduction, and synthesis conditions in order to enhance both tube density and degree of parallel alignment. The condition of $1{\AA}$ of Fe catalyst film, atmospheric oxidation at $750^{\circ}C$ for 10 min, reduction under 400 Torr for 5 min, and growth at $865^{\circ}C$ under 300 Torr yields $33tubes/10{\mu}m$, which is the highest tube density with parallel alignment. Based on the results of atomic force microscope and Raman spectroscopy, it was found that SWNTs have diameter range of 0.8-2.0 nm. We believe that the present work would contribute to the development of SWNTs-based flexible functional devices.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.3
• /
• pp.1840-1848
• /
• 2019

Background : There is lack of studies on the effects of the bag-carrying style on the shoulder muscles and body alignment in adults with rounded shoulder posture (RSP). Objective: The purpose of this study was to investigate the effects of various bag-carrying styles on muscle tone, muscle stiffness and spinal alignment in 20 adults with RSP as they were walking on a treadmill. Design : Crossover Study Design. Methods: A subject performed treadmill walking for 15 minutes at a speed of 4 ㎞/ｈ while carrying three different types of bags: a backpack, a cross bag, and a shoulder bag. Results : The results showed that the main effect of timing was observed in the muscle tone for all the variables and in muscle stiffness only for the upper and lower trapezius muscles. As for the main effect of timing, the muscle tone of the upper trapezius and the pectoralis major significantly increased in all conditions, while the muscle tone of the lower trapezius significantly decreased in all conditions. The muscle stiffness of the upper trapezius significantly increased in all conditions, while the muscle stiffness of the lower trapezius significantly decreased in all conditions. As for the spinal alignment, the dimple distance data values significantly decreased for the cross-bag style. Conclusions : This study demonstrated that walking with a heavy bag, regardless of the bag-carrying style, increased muscle stiffness around the shoulders in adults with rounded shoulder posture, and walking with a cross-bag also induced changes in spinal alignment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.671-677
• /
• 2018

In this paper, we investigated the vertical alignment characteristics of liquid crystals (LCs) on fluorinated self-assembled monolayers (FSAMs). For comparison, a commercialized homeotropic polyimide (PI) layer was used as an LC alignment layer. We confirmed the successful deposition of FSAMs and the change of FSAMs before and after rubbing treatment through contact angle measurement and atomic force microscopy. The optical transmittance spectrum of the FSAMs is similar to that of the homeotropic PI layer, which is a superior optical characteristic applicable to LC devices. When FSAMs were applied to the vertically aligned (VA) LC cell, uniform and vertical LC alignments were achieved. In addition, the voltage-transmittance characteristic of VA LC cell with FSAMs was superior to that of VA LC cell with the conventional homeotropic PI layers. These results indicate that the FSAMs are suitable as the homeotropic LC alignment layer for enhanced LC devices.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.108-121
• /
• 2019

This paper presents the study results on the design of the correction filter to improve the azimuth error estimation of the high-speed guided missile launched from the warship after the transfer alignment. We theoretically proved that the transfer alignment performance is determined by the accuracy of the marine inertial navigation system and the observability of the attitude error state variable in the transfer alignment filter, and that most of navigation errors in high-speed guided missile are caused by azimuth error. In order to improve the azimuth estimation performance of the correction filter, the multiple adaptive estimation method and the adaptive filters adapting the measurement noise covariance or the process noise covariance are proposed. The azimuth estimation performance of the proposed adaptive filter and the existing Kalman filter are compared and analyzed each other for 8 different transfer alignment accuracy cases. As a result of comparison and analysis, it was confirmed that the adaptive filter adapting the process noise covariance has the best azimuth estimation performance. These results can be applied to the design of correction filters for high-speed guided missile.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.30-35
• /
• 2019

Inertial measurement units (IMUs) are widely used for wearable motion-capturing systems in the fields of biomechanics and robotics. When the IMUs are combined with optical motion sensors (hereafter, OPTs) for their complementary capabilities, it is necessary to align the coordinate system orientations between the IMU and OPT. In this study, we compare the application of two coordinate transformation-based orientation alignment methods between two coordinate systems. The first method (M1) applies angular velocity coordinate transformation, while the other method (M2) applies gyroscopic angle coordinate transformation. In M1 and M2, the angular velocities and angles, respectively, are acquired during random movement for a least-square algorithm to determine the alignment matrix between the two coordinate systems. The performance of each method is evaluated under various conditions according to the type of motion during measurement, number of data points, amount of noise, and the alignment matrix. The results show that M1 is free from drift errors, while drift errors are present in most cases where M2 is applied. Thus, this study indicates that M1 has a far superior performance than M2 for the alignment of IMU and OPT coordinate systems for motion analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.2859-2872
• /
• 2019

Interference alignment (IA) has been a powerful approach to achieve the maximum degree of freedom (DoF) for K users multiple-input-multiple-output (MIMO) interference channels. However, due to the feasibility constraint, aligning all the interference signals at each receiver is impractical for large K without symbol extension. In this paper, we propose two best-effort interference alignment (BEIA) schemes that the network selects the maximum number of interfering transmitters to align their signals given the feasibility conditions when each transmitter-receiver pair has a constant number of data streams. Besides, in case of not all interfering signals aligned at each receiver, an upper bound of the average throughput is derived. Simulation results show that the proposed schemes have superiority over the traditional methods, such as time division multiple access (TDMA) and cluster IA(CIA), in low and moderate signal-to-noise ratio (SNR) region in terms of average user throughput. In addition, the proposed max-min relative interference distance alignment scheme outperforms the proposed scheme of equal interfering transmitters number alignment in terms of both average user throughput and minimum user throughput.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.181-188
• /
• 2019

Purpose: This study was performed to determine the effects of a gluteus maximus strengthening exercise on both spinal alignment and dynamic balance in subjects with kyphosis. Methods: We measured the kyphosis angle of 150 subjects and selected those whose kyphosis angle was > $50^{\circ}$. The participants included 10 male and 12 female college students. After a gluteus maximus strengthening exercise was applied, the subjects were measured by the formetric 4D and Biorescue systems. The collected data were analyzed by a paired t-test with the SPSS (Ver. 21) program for spinal alignment and dynamic balance comparisons both before and after the gluteus maximus strengthening exercise was completed. Results: The results regarding spinal alignment showed statistically significant decreases in pelvic tilt, kyphotic angle, and lordotic angle after the intervention (p < .05). However, trunk imbalance, pelvic torsion, surface rotation, and lateral deviation were not significantly different after the exercise. The results of the dynamic balance showed statistically significant increases in limits of stability after the exercise (p < .05). Conclusion: The above results suggest that the implemented gluteus maximus strengthening exercise may be effective for spinal alignment and dynamic balance in subjects with kyphosis.

• Journal of International Academy of Physical Therapy Research
• /
• v.12 no.2
• /
• pp.2331-2337
• /
• 2021

Background: More women than men experience genu recurvatum, which can lead to knee pain and arthritis if left unattended. Pilates combined with taping is a suitable rehabilitation method for women with genu recurvatum. Objectives: To aimed the effect of taping and Pilates stabilization exercise on physical alignment and improvement of genu recurvatum in women with genu recurvatum. Design: A Randomized controlled trial. Methods: Twenty-one women were divided into three groups: taping group (back of knee taping and quadriceps femoris taping, n=7), Pilates exercise group (hip, knee and abdominal muscles exercise, n=7), and combined group (taping with pilates exercise, n=7). The measured variables were sagittal plane alignment and back and abdominal muscle, knee flexor and extensor strength. Results: After the intervention, all sagittal plane alignments were significantly improved in both the Pilates and combined groups. Sagittal plane alignment was significantly improved in the combined group compared with the taping group. Back and abdominal muscle strength were significantly improved in the Pilates and combined groups compared with the taping group. Knee flexor and extensor were significantly improved in the combined group compared with the Pilates group and in the Pilates group compared with the taping group. Conclusion: Pilates exercise with taping or Pilates exercise alone was effective intervention methods to improve physical alignment and strength in women with genu recurvatum.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.321-326
• /
• 2021

We fabricated BiAlO thin film by a solution process with a brush coating to be used as liquid crystal (LC) alignment layer. Solution-processed BiAlO was coated on the glass substrate by brush process. Prepared thin films were annealed at different temperatures of 80℃, 180℃, and 280℃. To verify whether the BiAlO film was formed properly, X-ray photoelectron spectroscopy analysis was performed on Bi and Al. Using a crystal rotation method by polarized optical microscopy, LC alignment state was evaluated. At the annealing temperature of 280℃, the uniform homogenous LC alignment was achieved. To reveal the mechanism of LC alignment by brush coating, field emission scanning electron microscope was used. Through this analysis, spin-coated and brush coated film surface were compared. It was revealed that physical anisotropy was induced by brush coating at a high annealing temperature. Particles were aligned in one direction along which brush coating was made, resulting in a physical anisotropy that affects a uniform LC alignment. Therefore, it was confirmed that brush coating combined with BiAlO thin film annealed at high temperature has a significant potential for LC alignment.