• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.83-90
• /
• 2009

This paper presents the design and measurement of a flight model for a Ku-Band Linearized Channel Amplifier. All MMICs, Variable Gain Amplifier (VGA), Variable Voltage Attenuator ('.IVA), Branch line Coupler and Detector for Pre-distorter are fabricated using a Thin-Film Hybrid process. The performance of the fabricated module is verified through the radio frequency circuit simulation tool and electrical function test in space environment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.141-142
• /
• 2015

This literature study is focused on the improvement of lightweight concrete in perspective of foaming agent. Lightweight concrete is the cured concrete as putting required amount of foaming agent to slurry which is a mixture of a certain amount of cement, sand, and water. It has lower density than general concrete, because foaming agent disintegrates numerous bubbles evenly and independently. Thus, it is capable of lightening the weight and great for sound absorption and insulation, In foreign countries, studies for structural lightweight concrete mainly of tunnel grouting and weight lightening of heavy structures are going along actively. Domestically, exterior panel and ALC blocks are alternatively used for flooring. Therefore, this research consider improvement of lightweight concrete in perspective of foaming agent with foundation study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.149-155
• /
• 2000

This paper presents results from a computer-aided systems engineering application to system development projects. RDD-100 version of ALC Inc. was used in this work. The framework adopted in the study takes a unified approach to the system design and the process management associated with it, thereby coherent and full traceability between them is maintained. Conventional system engineering process supported by the tool is adopted in the system design. On the other hand, the same tool is also used to the systems engineering management to get full traceability between system design data and engineering management data. It is greatly helpful in managing many sub-contractors in the sense that the traceability can help identify the sub-project responsibility as well as the objectives of the project in coordination with interface requirements. We conclude with the advantage and limits of our unified approach.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.1
• /
• pp.9-15
• /
• 2023

The purpose of this study was to analyze the relationship between diabetes and liver function test results. Unlike type 2 diabetes mellitus (T2DM), hepatogenous diabetes is caused by abnormal liver function. In this study, the relationship between liver enzymes, aspartate aminotransferase (AST), alanine transaminase (ALT), and the AST/ALT ratio (De Ritis ratio), indicating liver function, and diabetes-related tests was analyzed. The results of the study showed a positive correlation between AST and glucose (r=0.14, P<0.01), ALT and glucose (r=0.21, P<0.01), AST and glycated hemoglobin (HbA1c) (r=0.15, P<0.01), and ALT and HbA1c (r=0.20, P<0.01). The De Ritis ratio showed a negative correlation with glucose (r=-0.20, P<0.01) and HbA1c (r=-0.14, P<0.01). The results of regression analysis with AST, ALT, and the De Ritis ratio as independent variables and glucose (R²=0.05) and HbA1c (R²=0.04) as dependent variables revealed that the independent variables had a statistically significant effect on the dependent variables. AST showed a lower correlation between blood glucose and glycated hemoglobin than ALT, and an increase in ALT caused a decrease in the De Ritis ratio. Therefore, the De Ritis ratio can be said to be meaningful in relation to diabetes-related tests.

• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.587-595
• /
• 2022

In this study, in order to understand the social psychological characteristics of college male students majoring in beauty, PAI tests were conducted on 163 university students located in Gyeonggi-do and Chungnambuk area in 2020. First, when comparing the average scales of men who majored in beauty and men who majored in general, the major male students of beauty showed an overall high clinically recognized type compared to students who majored in beauty, and a negative impression on a valid scale (NIM) considered treatment for physical complaints (SOM), depression (DEP) and drinking problems (ALC) on a clinical scale, and a significant difference was shown on a suicide idea (SUI) scale. Secondly, in order to navigate the PAI scale that significantly predicts beauty major male students, a stepwise regression analysis was performed using 15 significant scales as search factors in comparison between beauty major male and general major male students. As a result, physical complaints (SOM) and depression (DEP) scales were extracted, which became a factor that can predict male students in beauty major. Therefore, it can be understood that the male students in the beauty major have behavior patterns that are more obsessed with and more impulsive to physical problems than the male majors. These results will provide a lot of suggestions for the selection of future male students in beauty major, selection, management, education, consultation materials, and selection of occupations after graduation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.368-372
• /
• 1984

This paper deals with a rapid method for determination of ATP and its related compounds in fish and shellfish products using high performance liquid chromatography(HPLC). The HPLC used is a HPLC/ALC-224 equiped with UV-spectrophotometer (254 nm) as detector and integrator (Yanagimoto system-1000). The column used is a stainless steel tubing ($30.0\;cm{\times}3.9\;mm\;i.d.$) packed with ${\mu}-Bon-dapak\;C_{18}$. A mixture of $1\%$ triethylamine-phosphoric acid(pH6.5) was used as an eluent and the flow rate of the eluent was controlled at 2 ml/min. For the separation of ATP and its related compounds, a standard mixture of ATP, ADP, AMP, IMP, inosine and hypoxanthine was subjected to HPLC under the above mentioned conditions. Six peaks were obtained with retention times within 20 min, and elution order were hypoxanthine, IMP, inosine, AMP, ADP and ATP. But 5'-IMP and 5'-GMP fractions were not separated by this method. In generally, IMP content in boiled-dried fish and shellfish products purchased from the market was comparatively higher than that of other nucleotides. Especially, boiled-dried big eye herring marked higher value in IMP content than other boiled-dried ones. Hypoxanthine and inosine were major components of ATP-related compounds in dried products and seasoned-dried ones. And IMP content in seasoned-dried products was higher than that of dried ones. This fact is suggested that a part of IMP in seasoned-dried ones was derived from flavoring matter (MSG, 5'-IMP and 5'-GMP) which is added during the seasoning treatment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.204-205
• /
• 2014

Among common test methods of assessing structure safety for existing lightweight walls, the criteria of the quality assessment of the horizontal static load resistance has been considered ambiguous. In the current study, therefore, an experiment was conducted to figure out the standardized assessment criteria of the lightweight wall's horizontal static load resistance. Based on the findings of the experiment with gypsum board and ALC block walls, an acceptable amount of each standard and the variables of the stud wall arising from the appropriate load (1000N) on the wall in a daily life were accounted for, arbitrarily setting the maximum deformation amount below 15mm.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.59-63
• /
• 2004

In recent days. it is necessary to find environment-friendly way of diposing industrial waste and reclying system. So this study will analyze the property of Porous concrete improved by concrete waste powder and recycled lightweight aggregate and then suggest the ways of reclying. The method deals with experimenting unit weight of capacity. thermal conductivity, compression and ultrasonic pluse velocity. Considering the relation between ultrasonic pluse velocity and unit weight & thermal conductivity through the graph. the result of relation between ultrasonic pluse velocity and unit weight & thermal conductivity on the graph expessed their high interaction shown as direct proportion on the graph. Recycled Porous concrete merits lightweight and adiabatic. Therefore. we will expect that the current using ALC and Recycled Porous concrete has be similar thermal conductivity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.533-536
• /
• 2004

This study aims to manufacture and to evaluate lightweight cement composite using lightweight aggregate and expanded perlite. The expanded perlite and lightweight aggregates were mixed with cement, water, SP(superplasticizer), forming-agent and poly-propylene fiber. The specimens were cured at $20^{\circ}C$ for 24h and then at steam curing of $60^{\circ}C$, RH $100\%$ for 12h. As a result, We could make lightweight cement composite of satisfaction about ALC properties. However it is need to improve the properties of density and water absorption.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.104.1-104.1
• /
• 2003

The purpose of this study is to investigate the effect of the samples on the blood levels of glucose, glycohemoglobin(HbAlc), total cholesterol and triglyceride. The samples have been used in the treatment of a type 2 diabetic animal model (C57BlKsj db/db). The samples were administrated orally before each meal for 6 weeks. Cinnamon dose was 50mg/kg/day, 100mg/kg/day, 150mg/kg/day and 200mg/kg/day, respectively. Rhodiola rosea dose was 50mg/kg/day, 100mg/kg/day, 15-mg/kg/day and 200mg/kg/day, respectively. (omitted)