• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.367-367
• /
• 2013

Commercial applications of indium tin oxide (ITO) can be separated into two useful areas. As it is perceived to bear electrical properties and optical transparency at once, its chance to apply to promising fields, usually for an optical device, gets greater in the passing time. ITO is one of the transparent conducting oxides (TCO), and required to carry the relative resistance less than $10^{-3}{\Omega}$/cm and transmittances over 80 % in the visible wavelength of light. Because ITO has considerable refractive index, there exist applications for anti-reflection coatings. Anti-reflection properties require gradual change in refractive index from films to air. Such changes are obtained from film density or nano-clustered fractional void. Glancing angle deposition (GLAD) method is a well known process for adjusting nanostructure of the films. From its shadowing effects, GLAD helps to deposit well-controlled porous films effectively. In this study, we are comparing the reference sample to samples coated with controlled ITO multilayer accumulated by an e-beam evaporation system. At first, the single ITO layer samples are prepared to decide refractive index with ellipsometry. Afterwards, ITO multilayer samples are fabricated and fitted by multilayer ellipsometric model based on single layer data. The structural properties were measured by using atomic force microscopy (AFM), and by scanning X-ray diffraction (XRD) measurements. The ellipsometry was used to determine refractive indices and extinction coefficient. The optical transmittance of the film was investigated by using an ultraviolet-visible (UV-Vis) spectrophotometer.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.2
• /
• pp.113-120
• /
• 2011

Adsorbent combination studies have been carried out to remove nitrogen dioxide ($NO_2$) and volatile organic compounds (VOCs: BTEX) out of a subway environment characterized by high flow and low concentration. Optimal conditions for the high removal efficiency of the concerned target compounds were obtained through testing a series of control factors such as adsorbent sorts, thicknesses, and superficial velocity. It was found that the efficiencies increased as the specific surface area of activated carbon and its thickness increased, and external void fraction decreased. Furthermore, mixed activated carbon with granular and constructed contents was extensively tested to reduce pressure drop through the carbon bed. It was found that the performance of higher contents of granular activated carbon was better than that of higher contents of the constructed carbon. When the mixed carbon was applied to the subway ventilation system in order to eliminate $NO_2$ and VOC simultaneously, the removal efficiencies were found to be 75% and 85%, respectively.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.1-9
• /
• 2015

PURPOSES : The objective of this study is to propose a quality control and quality assurance method for use during asphalt pavement construction using non-destructive methods, such as ground penetrating radar (GPR) and an infrared (IR) camera. METHODS : A 1.0 GHz air-coupled GPR system was used to measure the thickness and in situ density of asphalt concrete overlay during the placement and compaction of the asphalt layer in two test construction sections. The in situ density of the asphalt layer was estimated based on the dielectric constant of the asphalt concrete, which was measured as the ratio of the amplitude of the surface reflection of the asphalt mat to that of a metal plate. In addition, an IR camera was used to monitor the surface temperature of the asphalt mat to ensure its uniformity, for both conventional asphalt concrete and fiber-reinforced asphalt (FRA) concrete. RESULTS : From the GPR test, the measured in situ air void of the asphalt concrete overlay gradually decreased from 12.6% at placement to 8.1% after five roller passes for conventional asphalt concrete, and from 10.7% to 5.9% for the FRA concrete. The thickness of the asphalt concrete overlay was reduced from 7.0 cm to 6.0 cm for the conventional material, and from 9.2 cm to 6.4 cm for the FRA concrete. From the IR camera measurements, the temperature differences in the asphalt mat ranged from $10^{\circ}C$ to $30^{\circ}C$ in the two test sections. CONCLUSIONS : During asphalt concrete construction, GPR and IR tests can be applicable for monitoring the changes in in situ density, thickness, and temperature differences of the overlay, which are the most important factors for quality control. For easier and more reliable quality control of asphalt overlay construction, it is better to use the thickness measurement from the GPR.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1092-1098
• /
• 2007

Since one decade, the detection of HFPD (High frequency Partial Discharge) has been proposed as one of the effective method for the diagnosis of the power component under service in power grids. As a tool for HFPD detection, Metal Foil sensor based on the embedded technology has been commercialized for mainly power cable due to its advantages. Recently, for the on-site noise discrimination, several PA (Pulse analysis) methods have been reported and the related software, such as Neural Network and Fuzzy, have been proposed to separate the PD (Partial Discharge) signals from the noises since their wave shapes are completely different from each other. On the other hand, the relevant fundamental investigation has not yet clearly made while it is reported that the effectiveness of the current methods based on PA is dependant on the types of sensors. Moreover, regarding the identification of the vital defects introducible into the Power Cable, the direct identification of the nature of defects from the PD signals through Metal Foil coupler has not yet been realized. As a trial for solving above shortcomings, different types of software have been proposed and employed without any convincing probability of identification. In this regards, our novel algorithm 'PA Map' based on the pulse analysis is suggested to identify directly the defects inside the power cable from the HFPD signals which is output of the HFCT and metal foil sensors. This method enables to discriminate the noise and then to make the data analysis related to the PD signals. For the purpose, the HFPD detection and PA (Pulse Analysis) system have been developed and then the effect of noise discrimination has been investigated by use of the artificial defects using real scale mockup. Throughout these works, our system is proved to be capable of separating the small void discharges among the very large noises such as big air corona and ground floating discharges at the on-site as well as of identifying the concerned defects.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.49
• /
• pp.283-324
• /
• 2011

The purpose of this paper is to research the air waybill and the carrier's liability in respect of the carriage of cargo by air under the Montreal Convention of 1999. The Warsaw Convention for the unification of certain rules for international carriage by air was adopted in 1929 and modified successively in 1955, 1961, 1971, 1975 and 1999. The Montreal Convention of 1999 modernized and consolidated the Warsaw Convention and related instruments. Under the Montreal Convention, in respect of the carriage of cargo, the air waybill shall be made out by the consignor. If, at the request of the consignor, the carrier makes it out, the carrier shall be deemed to have done so on behalf of the consignor. The air waybill shall be made out in three orignal parts. Under the Montreal Convention, the consignor shall indemnify the carrier against all damages suffered by the carrier or any other person to whom the carrier is liable, by reason of the irregularity, incorrectness or incompleteness of the particulars and statement furnished by the consignor or on its behalf. The air waybill is not a document of title or negotiable instrument. Under the Montreal Convention, the air waybill is prima facie evidence of the conclusion of the contract, of the acceptance of the cargo and of the conditions of carriage. If the carrier carries out the instructions of the consignor for the disposition of the cargo without requiring the production of the part of the air waybill, the carrier will be liable, for any damage which may be accused thereby to any person who is lawfully in possession of the part of the air waybill. Under the Montreal Convention, the carrier is liable by application of principle of strict liability for the damage sustained during the carriage of cargo by air. The carrier is liable for the destruction or loss of, or damage to cargo and delay during the carriage by air. The period of the carriage by air does not extend to any carriage by land, by sea or by inland waterway performed outside an airport. Under the Montreal Convention, the carrier's liability is limited to a sum of 17 Special Drawing Rights per kilogramme. Any provision tending to relieve the carrier of liability or to fix a lower limit than that which is laid down in this Convention shall be and void. Under the Montreal Convention, if the carrier proves that the damage was caused by the negligence or other wrongful act or omission of the person claiming compensation, or the person from whom he derives his rights, the carrier shall be wholly or partly exonerated from ist liability to the claimant to the extent that such negligence or wrongful act or omission caused the damage. Under the Montreal Convention, any action for damages, however founded, whether under this Convention or in contract or in tort or otherwise, can only be brought subject to the conditions and such limits of liability as are set out in this Convention. Under the Montreal Convention, in the case of damage the person entitled to delivery must complain to the carrier forthwith after the discovery of the damage, and at the latest, within fourteen days from the date of receipt of cargo. In the case of delay, the complaint must be made at the latest within twenty-one days from the date on which the cargo has been placed at his disposal. if no complaint is made within the times aforesaid, no action shall lie against the carrier, save in the case of fraud on its part. Under the Montreal Convention, the right to damage shall be extinguished if an action is not brought within a period of two years, reckoned from the date of arrival at the destination, or from the date on which the aircraft ought to have arrived, or from the date on which the carriage stopped. In conclusion, the Montreal Convention has main outstanding issues with respect to the carrier's liability in respect of the carriage of cargo by air as follows : The amounts of limits of the carrier's liability, the duration of the carrier's liability, and the aviation liability insurance. Therefore, the conditions and limits of the carrier's liability under the Montreal Convention should be readjusted and regulated in detail.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.141-149
• /
• 2004

The automobile equipped with a gasoline engine uses the ignition coil, namely, a high voltage generator, to make the mixed fuel ignited and burned in the combustion chamber, which results in the power to drive the engine. The ignition coil functions to convert a low voltage of the primary into a hiか voltage of the secondary by switching method, which will be transmitted to the electrode. Here, if the ignition coil has a defect even a little, it cannot function well. In this study, it was chosen epoxy molding ignition coil in recently and epoxy resin which is insulation material as specimens, and it was measured the characteristics of the partial discharge occurring to the specimens when those were applied to a voltage, and thereby, it was researched and analyzed the distribution of phase angle, amount and count of discharge due to the changing voltage, And as the result is applying to the actual automobile ignition system, it can be expected the enhancement of the performance of the ignition coil and the reliability of the electrical equipment.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1487-1503
• /
• 2019

The methods and performance of a pin-level nuclear reactor core thermal-hydraulics (T/H) code ESCOT employing the drift-flux model are presented. This code aims at providing an accurate yet fast core thermal-hydraulics solution capability to high-fidelity multiphysics core analysis systems targeting massively parallel computing platforms. The four equation drift-flux model is adopted for two-phase calculations, and numerical solutions are obtained by applying the Finite Volume Method (FVM) and the Semi-Implicit Method for Pressure-Linked Equation (SIMPLE)-like algorithm in a staggered grid system. Constitutive models involving turbulent mixing, pressure drop, and vapor generation are employed to simulate key phenomena in subchannel-scale analyses. ESCOT is parallelized by a domain decomposition scheme that involves both radial and axial decomposition to enable highly parallelized execution. The ESCOT solutions are validated through the applications to various experiments which include CNEN $4{\times}4$, Weiss et al. two assemblies, PNNL $2{\times}6$, RPI $2{\times}2$ air-water, and PSBT covering single/two-phase and unheated/heated conditions. The parameters of interest for validation include various flow characteristics such as turbulent mixing, spacer grid pressure drop, cross-flow, reverse flow, buoyancy effect, void drift, and bubble generation. For all the validation tests, ESCOT shows good agreements with measured data in the extent comparable to those of other subchannel-scale codes: COBRA-TF, MATRA and/or CUPID. The execution performance is examined with a mini-sized whole core consisting of 89 fuel assemblies and for an OPR1000 core. It turns out that it is about 1.5 times faster than a subchannel code based on the two-fluid three field model and the axial domain decomposition scheme works as well as the radial one yielding a steady-state solution for the OPR1000 core within 30 s with 104 processors.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.465-470
• /
• 2020

Complex materials are widely used in aviation industries where lightweighting is essential because they have lighter properties than metals. However, composite materials can cause defects such as internal void formation, poor adhesive mixing, and non-adhesive parts during the production process, and there is a risk of micro-cracking and interlayer separation due to low energy impact. Therefore, a structural damage test is essential. As a result, structural integrity monitoring using FBG is drawing attention. Compared to conventional electrical sensors, FBG has the advantage of being more corrosion-resistant and multiplexed without being affected by electrical noise. However, interloggers measuring FBG are expensive and have a large disadvantage because they are made on the premise of measuring large structures. In this paper, low-cost interloggers were designed for use in unmanned or small aircraft using optical switche, WDM filter, and LTFs, and compared to conventional high-priced interrogator.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.8
• /
• pp.17-28
• /
• 2015

The purpose of this study is to measure the volumetric water content of unsaturated soils during drying and wetting process by using volumetric pressure plate extractor (VPPE) incorporated with time domain reflectometry (TDR). The VPPE consists of a pressure cell, a pressure regulator, a burette system and a TDR probe. Two samples with different initial void ratios were prepared in the pressure cell, and the air pressure at the range of 0.1 kPa - 50 kPa was applied to adjust the matric suction by the pressure regulator. The burette system was used to measure the volumetric water content change of the sample according to the matric suction. In addition, the TDR probe, installed in the cell, was used to evaluate the dielectric constant from the reflected signal of the electromagnetic wave at the probe. The volumetric water content of specimen was estimated by the empirical equation between the volumetric water content and dielectric constant, which was calibrated with the Jumunjin sand. The test results show that the volumetric water content calculated by TDR probe is strongly correlated to the measured value by burette system. The hysteresis occurs during drying and wetting process. Furthermore, the degree of hysteresis reduces in the repeated process. This study suggests that TDR may be effectively used to evaluate the water content soil for the determination of water characteristic curve of unsaturated soils.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.261-284
• /
• 2018

The current international legal system does not provide a safeguard against the militarization and the weaponization of outer space. Although the term "peaceful use of outer space" in the 1967 Outer Space Treaty(OST) appears in official government statements or in multilateral space treaties, it is still without an authoritative definition in reviewing national practices. The ambiguous ban on weapons in Article IV of the OST allows countries to loophole on the deployment of other weapons other than nuclear weapons. Meanwhile "Draft Treaty on the Prevention of the Placement of Weapon in Outer Space and of the Threat or Use of Force against Outer Space Objects(PPWT)" to Conference on Disarmament (CD) commissioned by the UN General Assembly's Special Session jointly submitted by China and Russia in 2008 and later revised in 2014, attempting to define and prohibit the proliferation of weapons in outer space and provided definitions of prohibited weapons, are opposed by the US on the grounds that currently there is no arms race in outer space. Some experts support a hard law approach in which binding laws aimed at ultimately creating integrated and binding legal instruments in all aspects of the use of outer space should be adopted to regulate the military use of space. However as a temporary measure the soft law guidelines should be developed for the non liquiet, a situation where there is no applicable law. The soft law could be used to create support for the declaration of the treaties and to create international customary law. For example, the 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space that regulates the activities of the state in the exploration and use of the universe, and the 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space will illustrated. While substantial portions of the former was codified later in the 1967 OST, the latter which, although written in somewhat mandatory terms, have been consistently complied with by states, have arguably become part of customary international law. On November 12, 1974, the General Assembly reaffirmed that the development of international law may be reflected inter alia, by declarations and resolutions of the General Assembly which may to that extent be taken into consideration by the International Court of Justice.