• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.47-53
• /
• 2011

The Electric Multiple Unit (EMU) has many types of door system such as sliding door, plug door etc.al. according to customer's requirements. The sliding door is widely used in Korea but has weak point in the noise problem. In the low operation speed, the noise coming from outer side of the EMU is not an important factor. As the speed is higher than before, noise is increased and make a problem. The main cause of noise is the imperfect air tightness in the EMU. The plug door system has advantages for the noise reduction characteristic in the high speed area. We have been developing electric plug-in door. The door is controlled by Door Control Unit(DCU) following the order of Automatic Train Protection (ATP) that is a kind of train signalling system. DCU has to simultaneously open and close the doors and the operation of it is related to the passengers safety. So DCU is a safety device that is important to reliability and safety. DCU is composed of several devices of control, motor driving, Input/Output, communication and power. In this paper, we will describe the functions, characteristic, requirement, subsystem and test results of DCU used for the electric plug-in door.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.861-866
• /
• 2010

We obtained hot-water extracts (HWE) and 70% (v/v) ethanol extracts (EE) from cultured wild ginseng roots (CWGR) and determined the saponin and total polyphenol contents, and antioxidant activities. The yields of freeze-dried powder from the HWE and EE were 27.86% and 18.33% (both w/w), respectively. The total polyphenol content of the EE (22.63 mg/g) was higher than that of the HWE (17.90 mg/g). Ginsenoside-Rb1 and -Rg1 contents of hot-air-dried CWGR were 17.90 mg/g and 22.63 mg/g, respectively. The electron-donating ability of HWE and EE were 2.82-60.58% and 3.88?70.88%, respectively, and the reducing powers ($OD_{700}$) were 0.02-0.17 and 0.07-1.90, respectively, at concentrations of 1-20 mg/mL. Thus, the HWE reducing power was markedly lower than that of the EE, but the SOD-like activity of the EE was significantly higher than that of the HWE. The nitrite-scavenging activities of HWE and EE were 9.25-19.18% and 11.94-53.49%, respectively, at concentrations of 1-20 mg/mL. Additionally, the TBARS (Thiobarbituric acid reactive substances, % value) of the EE (1-20 mg/mL) was 9.18-66.59%, thus 1.9-2.8-fold greater than that of the HWE (4.74-24.88%). In conclusion, we provide experimental evidence that extracts of CWGR may be natural antioxidants.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.367-376
• /
• 2011

Huge amount of $CH_4$ mixtures has been emitted from landfills and organic wastes via anaerobic digestion. The recovery of high purity $CH_4$ from these gases has two merits: reduction of green house gases and production of renewable fuels. Membrane technology based on polymeric materials can be used in this application. In this study, asymmetric gas separation hollow fiber membranes were fabricated to develop the membrane-based bio-gas purification process. Polyethersulfone (PES) was chosen as a polymer materials because of high $CO_2$ permeability of 3.4 barrer and $CO_2/CH_4$ selectivity of 50[1]. Acetone was used as a non-solvent additive because of its unique swelling power for PES and highly volatile character. The prepared PES hollow fiber showed excellent separation properties: 36 GPU of $CO_2$ permeance and 46 of $CO_2/CH_4$ selectivity at optimized preparation conditions: 9wt% acetone content, 10cm air-gap and 4wt% PDMS coating processes. With the PES hollow fiber membranes developed, mixed $CO_2/CH_4$ test was done by changing various operating conditions such as pressures and feed compositions to meet the highest recovery of CH4 with 95% purity. High $CH_4$ recovery of 58 wt% was observed at 10 atm feed pressure for the 50 vol% of $CO_2$ in $CO_2/CH_4$ mixture.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.291-301
• /
• 2009

Double-layered polymer electrolyte membranes were prepared from two different sulfonated poly(aryl ether sulfone) copolymers by the two-step solution casting method for direct methanol fuel cells (DMFC). Sulfonation degrees were adjusted 10% (SPAES-10) and 50% (SPAES-50) by controlling monomer ratios, and the weight ratios of SPAES-10 copolymer were varied in the range of 5~20% to investigate the effect of thickness of coating layers on the membranes. Proton conducting layers were fabricated from SPAES-50 solutions of N-methyl-2-pyrrolidone (NMP) by a solution casting technique, and coating layers formed on the semiliquid surface of the conducting layer by pouring of SPAES-10-NMP solutions onto. It was found that double-layered polymer electrolyte membrane could significantly reduce the methanol crossover through the membrane and maintain high proton conductivities being comparable to single-layered SPAES-50 membrane. The maximum power density of membrane-electrolyte assembly (MEA) at the condition of $60^{\circ}C$ and 2 M methanol-air was $134.01\;mW/cm^2$ for the membrane prepared in the 5 wt-% of SPAES-10 copolymer, and it was corresponding to the 105.5% of the performance of the commercial Nafion 115 membrane.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.88-93
• /
• 2005

Anode-supported solid oxide fuel cell (SOFC) was investigated to increase the cell power density at intermediate temperature through control of the cathode structure. The anode-supported SOFC cell were fabricated by wet process, in which the electrolyte of $8mol\%\;Y_2O_3-stabilized\;ZrO_2 (YSZ)$ was coated on the surface of anode support of Ni/YSA and then the cathode was coated. The cathode has two- or three- layered structure composed of $(La_{0.85}Sr_{0.15})_{0.9}MnO_{3-x}(LSM),\;LSM/YS$ composite (LY), and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3{LSCF)$ with different thickness. Their single cells with different cathode structures were characterized by measuring the cell performance and ac impedance in the temperature range of 600 to $800^{\circ}C$ in humidified hydrogen with $3\%$ water and air. The cell with $LY\;9{\mu}m/LSM\;9{\mu}m/LSCF\;17{\mu}m$ showed best performance of $590mW/cm^2$, which was attributed to low polarization resistance due to LY and to low interfacial resistance due to LSCF.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.32-41
• /
• 2015

The Metropolitan Area Green Heat Project (MAGHP), which collects unused heat gathered from power plants, steel works, landfills in western Metropolitan area and distribute it to integrated energy business (IEB) companies, is proposed for the purpose of enhancing energy efficiency and providing low-price heat for IEB companies. Therefore, in order to decide on whether to initiate the MAGHP, the economic feasibility analysis of the project is widely demanded. This paper attempts to consider and measure four economic benefits: heat supply benefit, production cost reduction benefit, greenhouse gas mitigation benefit, and air quality improvement benefit. In addition, the paper tries to conduct the economic feasibility analysis. The project requires three-year investment and thirty-year operation. Three important findings emerge from the analysis. First, its net present value is computed to be 1,269 billion won and more than zero. Second, its benefit/cost ratio is calculated to be 1.72 and bigger than 1.0. Third, its internal rate of return is estimated to be 24.26% and larger than the social rate of return, 5.5%. In conclusion, the MAGHP is socially profitable and should be conducted immediately.

• Ecology and Resilient Infrastructure
• /
• v.2 no.3
• /
• pp.198-205
• /
• 2015

Impacts of climate change on aquatic ecosystems range from changes in physiological processes of aquatic organisms to species distribution. In this study, MaxEnt that has high prediction power without nonoccurrence data was used to simulate fish distribution changes in the Geum river watershed according to climate change. The fish distribution in 2050 and 2100 was predicted with RCP 8.5 climate change scenario using fish occurrence data (a total of 47 species, including 17 endemic species) from 2007 to 2009 at 134 survey points and 9 environmental variables (monthly lowest, highest and average air temperature, monthly precipitation, monthly lowest, highest and average water temperature, altitude and slope). The fitness of MaxEnt modeling was successful with the area under the relative operating characteristic curve (AUC) of 0.798, and environmental variables that showed a high level of prediction were as follows: altitude, monthly average precipitation and monthly lowest water temperature. As climate change proceeds until 2100, the probability of occurrence for Odontobutis interrupta and Acheilognathus yamatsuatea (endemic species) decreases whereas the probability of occurrence for Microphysogobio yaluensis and Lepomis macrochirus (exotic species) increases. In particular, five fish species (Gnathopogon strigatus, Misgurnus mizolepis, Erythroculter erythropterus, A. yamatsuatea and A. koreensis) were expected to become extinct in the Geum river watershed in 2100. In addition, the species rich area was expected to move to the northern part of the Geum river watershed. These findings suggest that water temperature increase caused by climate change may disturb the aquatic ecosystem of Geum river watershed significantly.

• Archives of design research
• /
• v.12 no.4
• /
• pp.182-190
• /
• 1999

There has been the rapid change of paradigm with the overflow of terms related to computers such as information, digital, cyber, virtual world and the change of time concept on the ground that it is common to change the world into virtual time. This study is about cybercharacters working in air-broadcasting with rapidly-developing internet, The cybercharacters including 3D animation developed from 2D animation are know to be manufactured with use of electronic mediun and computers and to exist in electronics. Though the emergence of the cybercharacters has a lot of gflnetic roots according to their objectives, they have in common that they are made by 3D graphics and they work in the virtual space, The great traits of the cybercharaters lie in the extension of interfacial function and ecological growth. In the cyberspace the interface, the meeting point between a computer and its users is the most important, The cybercharacters as medium providing new ruman interface become effective with growing interest in virtual reality, The cybercharacters also keep the ecological traits, They can also bring about added value with infusion of image and development of the network, These cybercharacters can also play the important parts in the continually developing cyberspace, The successful birth of the cybercharacter are based on, the technological power. assistance of fund and the ctrltural background, The information-entertainment of the cybercharacters functions well with the accompinimene of these three things, The cybercharacters can make a subject which keeps single issue as a central point of the virtual realty, The cybercharacters can also be connected with equity of "Korean knowledge information society" in the cultural rule of the internet and sociocul tural identity, identity.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.399-422
• /
• 1995

The purpose of this study was to investigate a fragment of possibility of pulpotomy with the Nd-YAG laser by the observation of pulpal healing process and the fine structural changes of the fibroblasts of the remaining pulpal tissues. Class V cavities on !55 teeth from 4 adult dogs were prepared and the pulp chambers were opened with a sterilized round bur. In the control group(19 teeth), the exposed coronal pulps were excised by a sharp excarvator. After bleeding was controlled with the sterilized cotton pellets, calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 1 : the pulpotomy with laser-calcium hydroxide powder application group(l9 teeth), the exposed coronal pulps were excised by Nd-YAG laser(10 watts power, 2 psi water, 20 psi air) for 2 or 3 seconds and calcium hydroxide powder was applied on the remaining pulpal tissues and the cavities were sealed with Z.O.E. In the experimental group 2 : the pulpotomy with laser-no calcium hydroxide powder application group(17 teeth), after amputating the coronal pulps with Nd-YAG laser as the experimental group 1, the remaining pulpal tissues were covered with stenilized aluminum foil and the cavities were filled with Z.O.E. The animals were sacrificed at the intervals of 1, 2, 3 and 4 weeks. All the teeth were rouutinely processed and the remaining pulpal tissues were observed by the light microscope and electron microscope. The results were as follows : 1. In light microscopic findings, there was no significant difference of the inflammatory response in the remaining pulpal tissues between the control group and the experimental groups. In both of the experimental group 1 : pulpotomy with laser-calcium hydroxide powder application group and the control group, the dentin bridges were observed after 2 weeks and the structure of the dentin bridge was almost same. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the fibrous layers instead of dentin bridge were observed on the superficial portion of the remaining pulpal tissues after 2 weeks and they were consisted with densely crowded active fibroblasts. 2. In the electronmicroscopic findings, the active fibroblasts in the experimental groups were more frequently observed than in the control group at 1 week. But active fibroblasts were found with same frequency after 2 weeks in all of the control group and the experimental groups. 3. General distortions of the cell such as loss of the cell membrane, vaculoization of the cell etc. were observed at the suberficial layer of the remaining pulpal tissues and the carbonization was found in the dentinal wall in 1 week of the experimental groups. 4. In the experimental group 2 : pulpotomy with laser-no calcium hydroxide powder application group, the activity and the density of the fibroblasts in the fibrous layer were more than those in the deep portion of the remaining pulpal tissues after 2 weeks. 5. In the control group, bacteria such as cocci and bacilli were observed frequently, but in the experimntal groups, they could not be observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.538-545
• /
• 2020

The outdoor coal storage sheds of thermal power plants are being converted to indoor coal storage sheds worldwide because of the environmental pollution problems in the surrounding areas. On the other hand, indoor coal storage sheds are causing problems, such as indoor coal scattering and harmful gas generation. In this study, the ventilation method of indoor coal storage sheds was analyzed in terms of the internal flow characteristics and ventilation according to the outside wind velocity and direction. CFD analysis was performed based on the actual flow measurement information inside the indoor coal storage sheds. A comparison of the wind speed of 6 m/s and 2 m/s when the outside wind direction was easterly showed that the stream velocity to the monitor louver was faster and the recirculation area was clearer at 6 m/s than at 2 m/s. In addition, the trend of a westerly wind was similar to that of the easterly wind. The ventilation rate according to the wind speed was 13.1 times and 4.4 times for a wind speed of 6 m/s and 2 m/s, respectively. If the wind speed is 2 m/s, the situation does not meet the required number of ventilations per hour in a general plant, and needs to be improved.