• 한국환경보건학회지
• /
• 제12권1호
• /
• pp.1-14
• /
• 1986

This investigation was carried out on the study of Ferrite formation by aerial oxidation of Fe $(OH)_2$ suspension of aqueous solution containing heavy metal ions. In this study the optimum reactionary condition of the Ferrite formation in Batch reactor wa studied by aerial oxidation which are subjected to various reaction time and temperature, under the different kinds of R(2NaOH/$FeSO_4$) Values, pH, Air flow rate, and $Fe^2+/M^2+$ mole ratio. The optimum condition for the Ferrite formation in Batch reactor was such that residence Time was 90 min., Temperature $65{\circ}$C, pH 11.0, Air flow rate 2.0l/min and $Fe^{2+}/M^{2+}$ mole ratio 4.0, which was observed by X-Ray diffraction analysis. The relation R-value, pH and ORP affecting the formation of Ferrite is that the jump step in pH 11.0, when a amount of NaOH is added, is steady state to the formation of Ferrite. Effect of R-value of $FeSO_4$ and $FeCl_2$ on the formation of Ferrite in different from each other the optimum condition of the in different from each other the optimum condition of the $FeCl_2$ is R-value 0.7, pH 11.0 and the $FeSO_4$ R-value 1.2, pH 11.0.

• 공업화학
• /
• 제25권2호
• /
• pp.215-221
• /
• 2014

염기 처리에 의한 간단한 방법으로 합성된 $MnO_2$ (B-$MnO_2$)는 불균일 촉매시스템으로 호기성 조건에서 효과적인 아민 산화반응을 보여주었다. 이 B-$MnO_2$ 촉매는 다양한 종류의 방향족, 이원자 화합물, 비활성 지방족 등의 아민의 전환에 높은 활성과 선택성을 보여주었다. 이러한 산화반응은 온화한 온도($50^{\circ}C$)와 대기압의 공기 조건하에서 아민을 중간체인 이민으로 전환하고 자가 축합(self-condensation) 또는 산화적 탈수소화(oxidative dehydrogenation)을 통해 다이이민(diimine) 또는 나이트릴(nitrile)을 생성하였다. 사용된 촉매는 여과로 쉽게 분리할 수 있었고 5번 이상의 재사용 실험에서도 일정이상의 높은 수율을 보여주었다. 따라서 B-$MnO_2$는 아민 산화반응을 통해 이민과 나이트릴을 얻음에 있어 경제적으로나 환경친환적으로 효과적인 면을 보여 줌으로써, 그린화학(green chemistry)의 목적에 적합하다.

• Environmental Engineering Research
• /
• 제11권6호
• /
• pp.311-317
• /
• 2006

Feasibility of destroying synthetic and actual leachate containing humic acids and ammonia compounds by supercritical water oxidation (SCWO) was evaluated. In this study, destruction efficiencies of humic acids and ammonia respectively were investigated at various reaction temperatures and residence times under pressure a supercritical pressure (280 atm). To lower reaction temperature, chemical oxidants were used. The experiment was carried out in a cylindrical batch reactor made of Hastelloy C-276 that can withstand high temperature and pressure. Concentrations of humic acids and ammonia were measured using a $COD_{Cr}$ method and an ammonia selective electrode, respectively. The optimal destructive condition of humic acids in the presence of stoichiometric oxygen(air) was 3 min at $380^{\circ}C$, but the temperature could be lowered to subcritical region ($360^{\circ}C$) along with $H_2O_2$ as an oxidant. For ammonia, the optimal destructive condition with air was 5 min at $660^{\circ}C$, but it was possible to operate the process for 3 minutes at $550^{\circ}C$ or 2 min at $600^{\circ}C$ along with $H_2O_2$ as an oxidant. At 2 min and $550^{\circ}C$ along with $H_2O_2$ as an oxidant, humic and ammonia compounds in the actual leachate were easily destructed and the effluent quality met the Korea Standard Leachate Quality.

• Asian Journal of Atmospheric Environment
• /
• 제11권4호
• /
• pp.300-312
• /
• 2017

To improve the understanding of secondary organic aerosol (SOA) formation from the photo-oxidation of anthropogenic and biogenic precursors at the regional background station on Baengnyeong Island, Korea, gas phase and aerosol chemistries were investigated using the Proton Transfer Reaction Time of Flight Mass Spectrometer (PTR-ToF-MS) and the Aerodyne High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS), respectively. HR-ToF-AMS measured fine particles ($PM_1$; diameter of particle matter less than $1{\mu}m$) at a 6-minute time resolution from February to November 2012, while PTR-ToF-MS was deployed during an intensive period from September 21 to 29, 2012. The one-minute time-resolution and high mass resolution (up to $4000m{\Delta}m^{-1}$) data from the PTR-ToF-MS provided the basis for calculations of the concentrations of anthropogenic and biogenic volatile organic compounds (BVOCs) including oxygenated VOCs (OVOCs). The dominant BVOCs from the site are isoprene (0.23 ppb), dimethyl sulphide (DMS, 0.20 ppb), and monoterpenes (0.38 ppb). Toluene (0.45 ppb) and benzene (0.32 ppb) accounted for the majority of anthropogenic VOCs (AVOCs). OVOCs including acetone (3.98 ppb), acetaldehyde (2.67 ppb), acetic acid (1.68 ppb), and formic acid (2.24 ppb) were measured. The OVOCs comprise approximately 75% of total measured VOCs, suggesting the occurrence of strong oxidation processes and/or long-range transported at the site. A strong photochemical aging and oxidation of the atmospheric pollutants were also observed in aerosol measured by HR-ToF-AMS, whereby a high $f_{44}:f_{43}$ value is shown for organic aerosols (OAs); however, relatively low $f_{44}:f_{43}$ values were observed when high concentrations of BVOCs and AVOCs were available, providing evidence of the formation of SOA from VOC precursors at the site. Overall, the results of this study revealed several different SOA formation mechanisms, and new particle formation and particle growth events were identified using the powerful tools scanning mobility particle sizer (SMPS), PTR-ToF-MS, and HR-ToF-AMS.

• 분석과학
• /
• 제18권2호
• /
• pp.130-138
• /
• 2005

VOCs (Volatile Organic Compounds)는 대기오염의 주원인으로서 인식되어왔다. 촉매산화는 저온에서 높은 효율을 나타내기 때문에 VOCs 제거를 위한 가장 중요한 처리기술중 하나이다. 이 연구에서는 $TiO_2$ 담체에 Pt, Ir 그리고 Pt-Ir을 담시지켜 촉매를 제조하였다. 반응물로서 Xylene을 사용하였다. 단일 또는 두 가지 이상의 촉매들은 함침법에 의해 준비하였고, X-ray diffraction (XRD), X-ray photo electron spectroscopy (XPS), transmittence electron microscophy (TEM) 분석을 통하여 특성화하였다. 그 결과 Pt 촉매는 Ir 촉매에 비해 더 높은 전환율을 나타내었고, Pt-Ir 촉매는 가장 높은 전환율을 나타내었다. VOCs 산화에서, Pt-Ir 촉매는 다양한 활성점을 나타내었고 그것은 Pt의 metal 영역을 강화시켰다. 따라서 두 가지 금속으로 이루어진 촉매가 단일 금속으로 이루어진 촉매에 비해 VOCs 전환율이 더 높았다. 동역학적으로 VOCs 산화는 1차 반응이다. 이 연구에서 Pt에 Ir을 소량 첨가함으로써 VOCs 산화반응에 효과적이었다.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.645-649
• /
• 2008

Graphite for the nuclear reactor is used to the moderator, reflector and supporter in which fuel rod inside of nuclear reactor. Recently, there are many researches has been performed on the various characteristics of nuclear graphite, however most of them are restricted to the structural and the mechanical properties. Therefore we focused on the thermal property of nuclear graphite. This study investigated the thermal emissivity following the oxidation degree of nuclear graphite with IG-11 used as a sample. IG-11 was oxidized to 6% and 11% in air at 5 l/min at $600^{\circ}C$. The porosity and thermal emissivity of the sample were measured using a mercury porosimeter and by an IR method, respectively. The thermal emissivity of an oxidized sample was measured at $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$ and $500^{\circ}C$. The porosity of the oxidized samples was found to increase as the oxidation degree increased. The thermal emissivity increased as the oxidation degree increased, and the thermal emissivity decreased as the measured temperature increased. It was confirmed that the thermal emissivity of oxidized IG-11 is correlated with the porosity of the sample.

• 공업화학
• /
• 제8권5호
• /
• pp.837-843
• /
• 1997

산화형 폴리에틸렌 왁스 제조에 있어서 주요 반응인자인 사용 왁스의 물성, 산화시간, 산화온도, 공기의 주입량 등에 따른 산가의 변화와 산화에 따른 폴리머의 물성을 분석하였다. 실험결과 주어진 반응조건 하에서 산화온도에 대한 산가의 변화는 $160^{\circ}C$까지는 증가하였지만 $170^{\circ}C$에서는 오히려 산가가 감소하는 경향을 보였고, 공기 주입량에 비례하여 산가는 증가하였다. 또한 사용한 왁스의 분자량이 낮을수록 산가가 높았다. 분자량과 밀도차가 공존하는 시료의 산화반응에서는 가지의 길이, 수 등에 의한 밀도보다는 분자량에 의한 영향이 큰 것으로 생각되었다. 산화가 진행됨에 따라 분자량은 감소하고 분자량 분포는 넓어짐을 알 수 있었다. 온화한 조건 하에서 고산가를 얻기 위하여 자유라디칼 개시제를 촉매로 사용하였는데 같은 조건 하에서 무촉매인 경우에 비하여 고산가의 산화형 왁스를 얻을 수 있었다. 또한 DCPO(dicumylperoxide), HOPO(t-butyl peroxy 2-ethyl heaxanoate), BPO(butylperoxide) 순의로 반감기가 긴 촉매가 효율적이었다.

• 한국분말재료학회지
• /
• 제16권3호
• /
• pp.185-190
• /
• 2009

Fe-Cr steels are the most promising candidate for interconnect in solid oxide fuel cells. In this study, an effective, dense and well adherent (LaSr)(CrCo)$O_3$ [LSCC] coating layer was produced onto 430 stainless steel (STS-430) by atmospheric plasma spraying and the oxidation behavior as well as electrical properties of the LSCC coated STS-430 were investigated. A significant oxidation of pristine STS-430 occurred at $800^{\circ}C$ in air environment, leading to the formation of $Cr_2O_3$ and $FeCr_2O_4$ scale layer up to ${\sim}7{\mu}m$ after 1200h, and consequently increased an area specific resistance of $330\;m{\Omega}{\cdot}cm^2$. Although the plasma sprayed LSCC coating contained the characteristic pore network, the coated samples presented apparent advantages in reducing oxidation growth of STS-430, resulting a decrease in oxide scale thickness of ${\sim}1{\mu}m$ at $800^{\circ}C$ after 1200h. The area specific resistance of the LSCC coated STS-430 was much reduced to ${\sim}7\;m{\Omega}{\cdot}cm^2$ after exposure at $800^{\circ}C$ for 1200h, compared to that of the pristine STS-403.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.277-284
• /
• 2004

Low carbon steels containing Si of up to $1.2\;wt\%$ were oxidized in air at 1373 K and 1523 K, i.e. below and above the eutectic temperature of FeO and $Fe_2SiO_4$. The influence of a impurity element, S on behavior of scale formation during oxidation was investigated by using $M\"{o}chssbauer$ spectroscopy and EDS. This allowed establishment of an interface oxidation model of Si-added steel depending on temperature and an impurity element. A compound of FeO and FeS was formed in the scale/matrix interface of low carbon steels containing S of up to $0.03\;wt\%$ oxidized above 1213 K of the eutectic temperature. This was flat formed between $Fe_2SiO_4$ nodules along the scale/matrix interface without selective oxidation. It is due to low viscosity and high wettability of the compound of FeO and FeS in liquid. Conventional metallographic examinations revealed that roughness of the scale/matrix interface in Si-added steels became flat as the content of S increased. It was independent of oxidizing temperature and Si content. Effects of oxidizing temperature and an impurity element content on descaling characteristics in Si-added steels were evaluated by using a hydraulic descaling simulator. Good descaling characteristics was attributable to this flatness of the scale/matrix interface.

• 한국수산과학회지
• /
• 제44권5호
• /
• pp.470-477
• /
• 2011

This study reviewed the effect of the drying conditions on the production of biogenic amines and lipid oxidation in semi-dried Pacific saury Cololabis saira or Guamegi. The moisture content of the Guamegi ranged from $32.71{\pm}2.37$ to $45.9{\pm}2.60$ g/100 g. The respective ranges of the acid value (AV) and peroxide value (POV) were $1.39{\pm}0.40$ to $15.79{\pm}0.47$ mg KOH/g and $76.14{\pm}2.19$ to $282.84{\pm}2.34$ meq/kg on drying for 3 days. The AV and POV increased for up to 3 days of drying and the values differed according to the amount of sunlight and temperature. However, lipid oxidation was reduced in Guamegi manufactured using a cold-air drying method. The fatty acid composition and the biogenic amine content in Guamegi during drying did not differ significantly with the drying method or drying date. The main saturated, monoene and polyene fatty acids were palmitic acid, eicosenoic & erucic acids, and eicosapentaenoic & docosahexaenoic acids, respectively. At 16.67 to 71.89 mg/kg, the histamine content was higher than that of other biogenic amines and it increased significantly during drying. In conclusion, this study showed that the packaging and drying conditions of Guamegi products need to be improved to inhibit lipid oxidation and biogenic amine formation.