• 한국환경과학회지
• /
• 제16권11호
• /
• pp.1225-1230
• /
• 2007

The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.175-179
• /
• 2009

본 논문에서는 전장용 아날로그 스위치 및 공조기 부하 유닛의 신뢰성 실험 중에서 EMC 스펙에 만족할 수 있도록 하는 필터 설계를 제안한다. EMC 규격에 만족하면서 전자부품들의 상호 간섭과 주변 환경의 영향을 최소화하고 제품의 품질 향상을 위해 전자파 필터를 적용하였다. 본 논문에서는 ISO/JASO 표준규격의 주파수범위인 30MHz ~ 1GHz 대역에서 스펙트럼 분석기와 간이 EMI 챔버를 이용한 시뮬레이션을 통해 특정 주파수 대역의 에너지 분포를 분석하였으며, 최적의 전자파 필터를 구현하기 위해 필터를 구성하는 소자의 용량을 결정하였다. 실제 필터 추가를 통해 노이즈가 감소한 것을 공인인증기관에서 증명하였으며, 전장용 아날로그 스위치 및 공조기 부하 유닛에 적용하여 전자파 간섭을 일으키지 않고 정상적인 동작을 수행하는 것을 확인하였다.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.20-26
• /
• 2022

Centrifugal spinning is an emerging technique for fabricating micro-to-nano-fibers in recent years. To obtain fibers with the desired size and morphology, it is necessary to configure and optimize the parameters used in centrifugal spinning. In this study, it was controlled by changing the solution's concentration (7.5, 10, and 12.5 wt.%) and disk's rotational velocity (6,000, 8,000, and 10,000 rpm) to prepare centrifugal spun nano-filter. The morphological property, air permeability, and dust collection efficiency of the PVA/PP bi-layer nanoweb prepared by centrifugal spun PVA on the PP micron nonwoven substrate are studied using a field emission scanning electron microscope, an air permeability tester, and a filter tester equipment, and the analysis results indicate that it is suitable as a nano-filter when the concentration of PVA solution is 10 wt.% and the rotational velocity of the disk is 8,000 rpm. The resultant reduced diameter and uniform fibers also proved that an excellent dust collection efficiency filter could be made.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.885-890
• /
• 2015

나노물질은 작은 크기와 공기필터 응용장치의 초고표면적과 함께 기계적, 물리적, 화학적 특성을 가진다. 전기방사는 나노섬유 중합체를 제조하는데 있어 가장 효율적인 기술로 인식되어왔다. 최적의 제조 조건을 찾기 위해, 여러 전기방사 공정 파라미터의 효과에 따른 폴리아크릴로니트릴(PAN) 나노섬유의 직경, 성향 및 분포를 분석했다. 층간파괴 인성 향상시키고 히트롤러로 적층된 부직포의 형태로 박리를 억제하고, PAN 나노섬유 공기필터의 여과효율과 압력강하 성능을 실험적으로 평가하였다.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.59-64
• /
• 2023

본 논문은 전자기기에 사용되는 전원의 노이즈 저감을 위한 전도성(Conducted) EMI 필터의 경험적 설계를 통하여 제안하였다. 제안된 구조는 A형, B형, C형, D형의 구조를 설계하였으며, 다양한 X-커패스터와, Y-커패스터, Air-인덕터로 LC 네트워크 사용으로 전도성 노이즈 저감을 확인하였다. L1, L2는 10[μH]를 사용하였으며, C1, C2는 4.7[nF]를 사용하였다. 공통모드(Common Mode)용 L3는 13[μH]를 사용하였으며, C5, C6, C7은 10[nF]을 사용하여 설계하였다. 설계된 EMI 필터의 측정된 삽입손실 값은 3.2MHz에서 -74.4[dB], 4MHz에서 -75.4[dB], 13.56MHz에서 -75.3[dB]로 나타났다. 따라서 제안한 EMI 필터는 다양한 전자기기에 사용되는 전원 노이즈 저감에 이용될 것이다.

• Asian Journal of Atmospheric Environment
• /
• 제11권2호
• /
• pp.107-113
• /
• 2017

This study describes (1) the impact of positive sampling artifacts caused by not only a filter-based sampling, but also a denuder-based sampling in the determination of particle-phase organic carbon (POC), (2) the effect of sample flow rate on positive artifacts, and (3) an optimum flow rate that provides a minimized negative sampling artifact for the denuder-based sampling method. To achieve the goals of this study, four different sampling media combinations were employed: (1) Quartz filter-alone (Q-alone), (2) quartz filter behind quartz-fiber filter (QBQ), (3) quartz filter and quartz filter behind Teflon filter (Q-QBT), and (4) quartz filter behind carbon-based denuder (Denuder-Q). The measurement of ambient POC was carried out in an urban area. In addition, to determine gas-phase OC (GOC) removal efficiency of the denuder, a Teflon filter and a quartz filter were deployed upstream and downstream of the denuder, respectively with varying sample flow rates: 5, 10, 20, and 30 LPM. It was found that Q-alone sampling configuration showed a higher POC than QBQ, Q-QBT, and Denuder-Q by 12%, 28%, and 23%, respectively at a sample flow rate of 20 LPM due to no correction for positive artifact caused by adsorption of GOC onto the filter. A lower quantity of GOC was collected from the backup quartz filter on QBQ than that from Q-QBT. This was because GOC was not in equilibrium with that adsorbed on the front quartz filter of QBQ during the sampling period. It is observed that the loss of particle number and mass across the denuder increases with decreasing sample flow rate. The contribution o f positive arti facts to POC decreased with increasing sample flow rate, showing 29%, 25%, and 22% for 10, 20, and 30 LPM, respectively. The 20 LPM turns out to be the optimum sample flow rate for both filter and denuder-based POC sampling.

• 한국입자에어로졸학회지
• /
• 제14권1호
• /
• pp.9-16
• /
• 2018

We have developed an electrostatic precipitation (ESP) type air cleaner for indoor air quality and investigated its performances regarding CADR (Clean air delivery rate), single-pass efficiency and gas removal efficiency. The ESP air cleaner used an ACF (Activated carbon fiber) filter for gas removal and the ACF as a high voltage electrode for particle removal. The ESP air cleaner was tested in a chamber with the volume of $1m^3$ regarding CADR and gas removal efficiency. The applied CADR area of the ESP was $1.8m^2$. Gas removal efficiency was tested with 3 gases (Acetaldehyde, Acetic acid, Ammonia). As the results of the gas removal efficiency, the ESP air cleaner shows the removal efficiencies of 90, 98 and 85% for acetaldehyde, acetic acid and ammonia, respectively.

• 공업화학
• /
• 제27권4호
• /
• pp.433-438
• /
• 2016

본 연구에서는 CO, HCHO, $CH_3CHO$, PM10, PM2.5 등의 담배연기 내에 포함된 유해물질들의 농도를 지표로 광촉매와 필터로 구성된 공기정화장치를 부착한 흡연부스 내의 공기질을 평가하였다. 또한 광촉매에서 발생되는 OH 라디칼과 담배연기 내 가스상 유해물질들과의 반응성을 향상시켜 제거효율을 높이기 위해 적외선을 주사하였다. 공기정화장치와 필터를 활용한 흡연부스의 실험 결과, 시스템 가동 전보다 가스상 오염물질은 포름알데히드 포함 최대 85.2% 향상된 제거효율을 나타냈다. 처리 후의 미세먼지는 최대 89.4% 향상된 제거효율을 나타냈다.

• 한국환경복원기술학회지
• /
• 제21권3호
• /
• pp.99-110
• /
• 2018

Compared to yellow dust coming from China or particulate matter created naturally in spring due to Total Suspended Particulate(TSP), particulate matter in winter season have much more serious effect on human body as they penetrate cell membranes. Although such particulate matter are becoming a social issue, there are no concrete plans on how to reduce them. Air-purifying plants are limited in maintaining the indoor air quality of large area because it is usually difficult to quantify their performance. In order to improve this, a bio-filter that can be connected to air conditioner is suggested as an option. This study seeks to improve air conditioning model-based monitoring method for bio-filters from prior studies and objectify correlations between applied vegetation and growing environment into quantitative indicators. By doing so, this study seeks to provide criteria on plants applied to artificial soil-based vegetation bio-filters and basic information to set air-conditioning features. The study results confirmed significant tendency on the growing stability of each purifying plant in mechanical air-conditioning environment. Among three models selected for bio-filter vegetation models, epipremnum aureum showed high performance in quantitative indicators, including soil moisture, EC, and leaf temperature, etc., indicating that it would assure the highest growing stability in this test air-conditioning environment.

• 분석과학
• /
• 제13권4호
• /
• pp.412-422
• /
• 2000

실리콘 웨퍼 산업계의 청정실에서 사용되는 에어샤워기중 고분자로 제작된 부품들을 $100^{\circ}C$에서 30분간 다이나믹 해드 스페이스에서 가스로 용출한 후 GC-MS로 분석 하였다. 에어샤워기가 가동중인 청정실의 대기를 흡착관 튜브방식으로 채취하였고, 이러한 흡착관 튜브에 흡착된 유기화합물은 쏙시렛 용출법을 이용하여 용출한 후 GC-MS로 분석하였다. 에어샤워기의 제조 부품(electric over current relay, acryl plate. polycarbonate window, filter, fan housing, steel galvanized cold plate and canvas buffer)들로 부터의 분석결과 대부분의 성분들은 제조부품의 고분자 성분들에서 유래되었음을 확인 할 수 있었으며, 에어샤워기가 가동중인 청정실의 대기분석 결과와 비교 분석되었다. 이러한 분석결과의 비교 연구는 청정실내에서의 유기오염물질이 에어샤워기의 고분자 제조부품으로부터 유래 되었는지를 확인하게 해준다.