• 제목/요약/키워드: air filter

검색결과 1,003건 처리시간 0.033초

대기중의 중금속 분석을 위한 여지의 전처리 방법에 관한 연구 (The Study on Pre-treatment Method of Filter for Analysing the Heavy Metals in Air Quality)

  • 김광래;이상칠;어수미;김민영;신재영;이재영
    • 한국환경보건학회:학술대회논문집
    • /
    • 한국환경보건학회 2002년도 춘계 국제 학술대회
    • /
    • pp.16-19
    • /
    • 2002
  • This study was carried out to establish the standardized analysis method in order to decide accurate concentrations of hazardous metals in the air. Acid decomposition method used usually was compared to microwave digestion method. Comparing results of tested background concentration in blank filter, we found that the magnitude of element concentration was Na, Ca, K, Mg, Al and Ba by order. The element concentrations of Glass fiber filter were higher than those of Quartz fiber filter, and the number of undetected components in Glass fiber filter was lower than that in Quartz fiber filter. Thus it is supposed that the concentration of background elements in Glass fiber filter was higher than those in Quartz fiber filter The extraction rate of microwave digestion method was superior to those of acid decomposition method during the test of blank filter as well as SRM of NIST. In case of the SRM of NIST, the average extraction efficiency of acid decomposition Method and microwave pretreatment is 53.8∼82.7%, 81.3∼97.1%, respectively. This result might be caused by the closed system of Microwave, which make outflow and loss of components less. Also microwave digestion method has other merits such as the minimization of time, reagents, and contamination. Furthermore, if the extraction condition, extraction time and used acids are optimized, the better results will be represented.

  • PDF

공기 중 미세먼지와 휘발성유기화합물 제거를 위한 활성탄 전기방사 필터 연구 (Study on Electrospun Activated Carbon Mats for the Filtration of Particulate Matter and Volatile Organic Compound in the Air)

  • 한상일
    • Korean Chemical Engineering Research
    • /
    • 제56권3호
    • /
    • pp.356-360
    • /
    • 2018
  • 인구증가와 개발 도상 국가의 산업 활동 증가로 인해 대기 중 미세먼지농도가 상승함에 따라 생태계에 미치는 영향이 심각해지고 있다. 그로인해 미세먼지발생을 줄이기 위한 정책을 수립하여 시행하거나 미세먼지를 여과해주는 공기청정기나 마스크의 연구가 활발히 이루어지고 있다. 본 연구에서는 전기방사실험을 통해 셀룰로스 아세테이트 파이버 필터를 제조하고 고분자용액에 활성탄을 첨가하여 미세입자 제거에 미치는 활성탄의 영향을 평가하였다. 미세입자 생성을 위해 염화나트륨 수용액을 사용하였으며, 공기 중 수분의 영향을 배제하기 위해 건조기를 설치하여 수분을 제거한 후 필터 성능을 분석하였다. 활성탄이 첨가될수록 미세입자 제거 효율은 증가하였으며, 아세톤 흡착량 또한 증가하였다.

KZ 필터법을 이용한 서울지역 미세먼지 농도의 장기변화 분석 (Long Term Analysis of PM10 Concentration in Seoul Using KZ Filter)

  • 이정영;공부주;한진석;이민도
    • 한국대기환경학회지
    • /
    • 제24권1호
    • /
    • pp.63-71
    • /
    • 2008
  • Local meteorological conditions exert a strong influence over day-to-day variations in air pollutant concentrations. Therefore, the meteorological fluctuations have to be removed in order for air quality planners and managers to examine underlying emissions-related trends and make better air quality management decisions for future. In this study, the meteorologically adjusted $PM_{10}$ trends in Seoul are investigated over the period $1999{\sim}2006$ using Kolmogorov-Zurbenco (KZ) filter. The result indicated that meteorologicaJ variability accounts for about 25% of $PM_{10}$ variability. Both the meteorologically adjusted and unadjusted Jong-term daily $PM_{10}$ concentrations had a significant downward trends and the difference between the meteorologically adjusted and unadjusted was small. So it was assumed that in long-term daily $PM_{10}$ changes, localized changes in emissions is more important than the changes caused by meteorological conditions.

Numerical Analysis of Axial-Flow Cyclone Separator for Subway Station HVAC System Pre-Filter

  • Kim, Myung-Joon;Kim, Ho-Joong;Kwon, Soon-Bark;Kim, Se-Young;Kim, Jin-Kwan;Shin, Chang-Hun;Bae, Sung-Joon;Hwang, Sun-Ho;Kim, Tae-Sung
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제17권3호
    • /
    • pp.94-99
    • /
    • 2009
  • In the Korean subway station, three types of pre-filters, which include auto filter, electrostatic precipitator (ESP) and auto cleaning demister, are widely used. However, these devices have some problems such as the difficulty of maintenance and high operating cost. In this study, axial-flow cyclone separator was employed as a pre-filter inside a heating, ventilation, and air conditioning (HVAC) system. 3-dimensional computational fluid dynamics (CFD) analysis was performed on a single unit axial-flow cyclone and coupled unit axial-flow cyclone. Calculated and measured pressure drop of the designed axial-flow cyclone were found be comparable to other types of pre-filters and the observed cut-off diameter was less than 10 micron. Considering lower operating and maintenance cost, axial-flow cyclone was proved to be a better solution as a pre-filter.

고밀도 폴리에틸렌 플렉시 필라멘트로 제조된 습식부직포의 에어필터 여재 특성 연구 (Air-Filter Media Characteristics of Wet-laid Nonwoven based on HDPE Plexi-filament)

  • 배영환;위재형;이명성;양병진;김도군;여상영
    • 한국염색가공학회지
    • /
    • 제33권4호
    • /
    • pp.302-308
    • /
    • 2021
  • Air filters are being used in countless places from industrial sites to everyday life. The spread of the COVID-19 virus, which started in 2019, is disrupting people's daily lives, and the importance of air filters as a basic means to prevent the spread of these diseases is further highlighted. In this study, the purpose was to develop another type of air filter media with excellent barrier properties that can replace PP meltblown nonwoven fabrics widely used commercially due to its excellent electrostatic properties, differential pressure and filtration efficiency. Therefore, wet-laid nonwoven for air filters were manufactured using plexi-filaments formed through flash spinning and having various fiber diameter from hundreds of nanometers to tens of micrometers, and its applicability as an air-filter media was investigated compared to the meltblown nonwoven. As a result of the performance evaluation, it was found that the filtration efficiency and barrier performance at 0.3㎛ was superior to that of the meltblown nonwoven of the same weight, although the differential pressure was high due to morphological properties of the plexi-filament.

공기조화기 장착용 축상유입식 싸이클론의 압력손실에 대한 수치해석 및 실험적 연구 (Numerical and experimental study on the pressure dorp of axial-flow cyclone in the air handling unit)

  • 권순박;박덕신;조영민;김세영;김명준;김호중;김태성
    • 한국입자에어로졸학회지
    • /
    • 제5권2호
    • /
    • pp.37-43
    • /
    • 2009
  • Particulate matter (PM) is one of the major indoor air pollutants especially in the subway station in Korea. In order to remove PM in the subway station, several kinds of PM removal system such as roll-filter, auto-washable air filter, demister, and electrostatic precipitator are used in the air handling unit (AHU) of subway stations. However, those systems are prone to operation and maintenance problems since the filter-regeneration unit consisting of electrical or water jet parts might malfunction due to the high load of particulates unless the filter medium is periodically replaced. In this study, the use of axial-flow cyclone was proposed for particulate filter unit in the AHU for its low operation and maintenance cost. Novel shape of axial-flow cyclone was designed by using computational fluid dynamics (CFD). The shape of vortex vane was optimized in terms of pressure drop and tangential velocity. In addition, CFD analysis was validated experimentally through the pressure drop measurement of mock-up model. We found that pressure drop and tangential velocity of fluid through the axia-flow cyclone was significantly affected by the rotating degree of vortex vane and the numerical prediction of pressure drop agreed well with experimental measurement.

  • PDF

자동차(自動車) Air Filter PET/PP 혼합(混合) 폐(廢)플라스틱의 재활용(再活用)에 관(關)한 연구(硏究) (Study on Recycling of Air filter PET/PP mixed Plastics from Automobiles)

  • 안태광;김혜태
    • 자원리싸이클링
    • /
    • 제17권3호
    • /
    • pp.21-28
    • /
    • 2008
  • 자동차 부품으로 사용되는 air filter media인 PET와 frame으로 사용되는 PP의 혼합폐플라스틱의 제조공정의 edge scrap 및 부품의 교체로 발생된 post-consumer waste에 대한 재활용 연구를 진행하였다. 수거된 혼합 폐플라스틱을 파쇄 및 건조시킨 후 세 가지 형태의 상용화제의 배합비 별로 압출기를 이용한 용융 블렌딩을 실시하여 재생 칩을 제조하였다. 사용된 상용화제는 EVA, MBS, 그리고 가소화 재생 PVB이고, 이들의 배합비는 $3{\sim}10wt.%$까지 혼합하였다. 상용화제의 종류와 배합비의 변화에 따른 기계적 특성과 열적 특성을 비교하였다. 이들 상용화제 종류별 분석에서는 MBS 상용화제가 가장 뛰어난 기계적 특성을 좌였고, 배합비는 $3{\sim}5wt.%$에서 우수한 특성 값들을 보였다. 또한 EVA를 상용화제로 사용한 경우 배합비가 $3{\sim}5wt.%$에서 내충격성 및 열적 특성의 향상을 보여 내충격성이 요구되는 재활용 제품으로의 응용이 기대된다. 재생 PVB수지를 상용화제로 사용한 경우는 전체적으로 특성치의 저하를 보이기는 하나 toughening effect가 요구되는 분야로의 응용이 기대된다.

IoT 기반 지하역사 내 바이오필터시스템 설치에 따른 실내공기질 변화 및 영향 요인 분석 (Analysis of Changes and Factors Influencing IAQ in Subway Stations Using IoT Technology after Bio-Filter System Installation)

  • 양호형;김형주;방성원;조흔우;김호현
    • 한국환경보건학회지
    • /
    • 제47권5호
    • /
    • pp.410-424
    • /
    • 2021
  • Background: Subway stations have the characteristics of being located underground and are a representative public-use facility used by an unspecified number of people. As concerns about indoor air quality (IAQ) increase, various management measures are being implemented. However, there are few systematic studies and cases of long-term continuous measurement of underground station air quality. Objectives: The purpose of this study is to analyze changes and factors influencing IAQ in subway stations through real-time continuous long-term measurement using IoT-based IAQ sensing equipment, and to evaluate the IAQ improvement effect of a bio-filter system. Methods: The IAQ of a subway station in Seoul was measured using IoT-based sensing equipment. A bio-filter system was installed after collecting the background concentrations for about five months. Based on the data collected over about 21 months, changes in indoor air quality and influencing factors were analyzed and the reduction effect of the bio-filter system was evaluated. Results: As a result of the analysis, PM10, PM2.5, and CO2 increased during rush hour according to the change in the number of passengers, and PM10 and PM2.5 concentrations were high when a PM warning/watch was issued. There was an effect of improving IAQ with the installation of the bio-filter system. The reduction rate of a new-bio-filter system with improved efficiency was higher than that of the existing bio-filter system. Factors affecting PM2.5 in the subway station were the outdoor PM2.5, platform PM2.5, and the number of passengers. Conclusions: The IAQ in a subway station is affected by passengers, ventilation through the air supply and exhaust, and the spread of particulate matter generated by train operation. Based on these results, it is expected that IAQ can be efficiently improved if a bio-filter system with improved efficiency is developed in consideration of the factors affecting IAQ and proper placement.