• 제목/요약/키워드: air drying

검색결과 1,149건 처리시간 0.034초

해조류(海藻類)의 가공(加工) 및 이용(利用)에 관한 연구(硏究) 1. 미역분말쥬스제조(製造) (Studies on the Processing and Utilization of Seaweeds 1. Preparation of Powdered Sea Mustard, Undaria pinnatifida, Mixtures for Juice Type Beverage)

  • 이응호;차용준;김정균;권칠성
    • 한국식품영양과학회지
    • /
    • 제12권4호
    • /
    • pp.382-386
    • /
    • 1983
  • 영양적(營養的) 또는 약리적(藥理的)으로 우수(優秀)한 미역의 효율적인 이용방안(利用方案)의 하나로서 미역분말쥬우스를 가공(加工)하여 화학적조성(化學的組成) 및 색소안정성(色素安定性)에 관해 실험한 결과를 요약(要約)하면 다음과 같다. 1. 가공방법(加工方法)은 생미역을 물로 씻어 이물질(異物質) 및 토사(土砂)를 제거하고 난 후 3%식염 및 1%탄산마그네슘 혼합용액(원료(原料)의 10배량)에서 $85^{\circ}C$, 20초간 데친 다음 물기를 빼고 열풍건조기(熱風乾燥機)($50{\sim}53^{\circ}C$, 풍속 3m/sec, 습도 21.4%)에서 3시간동안 건조(乾燥)시켰다. 그리고 난 후 200mesh까지 분쇄(粉碎)하여 중량비(重量比)로서 분말미역 0.8%, 식염 9.75%, 설탕 1.25%, 아스코르브산 0.2% 그리고 미싯가루 0.25% 첨가하여 미역분말제품으로 하였다. 2. 가공중 제품의 화학적(化學的) 성분변화(成分變化)는 아미노질소가 증가하였고, 회분함량(灰分含量)은 19%, 알긴산은 5.5%정도 감소한 것 이외에는 큰 변화(變化)가 없었고, 생미역에 대한 제품의 색소잔존율(色素殘存率)은 chlorophyll은 91.6%, total carotenoid는 89.5%로서 상당히 양호(良好)하였다. 3. 관능검사결과(官能檢査結果) 색깔, 냄새, 맛 및 분산성(分散性)은 양호(良好)하였으며, 특히 미싯가루 첨가에 의한 미역의 강한 이취(異臭)를 차폐(遮蔽)시킬 수 있었다.

  • PDF

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.

열처리 방법에 따른 가공 인삼 열수추출물의 이화학적 품질 특성 (Physicochemical quality characteristics of hot water extracts of processed ginseng based on different heat treatments)

  • 강윤한;저우뤠이;김효진;김지은;신일식
    • 한국식품저장유통학회지
    • /
    • 제25권1호
    • /
    • pp.155-163
    • /
    • 2018
  • 본 연구는 고온 고압의 autoclaving 조건에서 2시간 내외로 증삼한 인삼과 그 용출액으로 2단계 열풍건조법으로 제조한 홍삼을 분말로 하여 그 열수추출물에 대한 이화학적 특성을 조사하였다. 즉 시료로 사용한 홍삼의 제조는 고온 고압으로 증삼한 용출액을 건조시 증삼 표면에 바르고 건조하여 외형이 흑삼 모양으로 변하였다. 홍삼 분말로부터 열수추출물의 총 폴리페놀, 총 플라보노이드, 총당, 산성다당체, 조사포닌 등의 함량을 분석하고, 색차계와 전자코를 이용하여 향미 성분을 측정하였다. Autoclave를 이용한 홍삼 열수추출물(ARG)의 총 폴리페놀 함량은 9.06 mg GAE/g, 총 플라보노이드 3.38 mg NE/g, 총당 35.22 g/100 g, 산성다당체 10.90 g/100 g, 조사포닌 10.22 g/100 g으로 나타났다. 본 홍삼제조법에 의해 얻어진 홍삼을 이용한 열수추출물은 총 폴리페놀, 총 플라보노이드, 조사포닌 등의 최종 함량이 다른 홍삼 제조법에 비해 높게 나타났으며, 고온 고압으로 단시간에 얻은 증삼액인 용출액은 진세노사이드 조성이 다양하였다. Rb1을 포함한 인삼의 주요 진세노사이드 총 함량은 ARG에서 가장 낮은 10.69 mg/g으로 나타났으며 가공 조건이 홍삼 특유의 진세노사이드로의 전환에 영향을 주었다. Autoclave로 얻어진 홍삼 및 용출액은 홍삼성분의 저분자량으로의 변환을 통해 색의 강화 등 향미성분이 개선되어 식품 뿐만 아니라 비식품의 소재 및 제품을 위한 수요가 기대된다.

EIS를 활용한 경량골재 종류별 시멘트 경화체의 계면특성 분석 (ITZ Analysis of Cement Matrix According to the Type of Lightweight Aggregate Using EIS)

  • 김호진;정용훈;배제현;박선규
    • 한국건설순환자원학회논문집
    • /
    • 제8권4호
    • /
    • pp.498-505
    • /
    • 2020
  • 골재는 콘크리트 체적의 약 70~85%를 차지하며, 콘크리트의 건조수축을 저감시켜주는 필수요소이다. 하지만 고층건축물 건설시 천연골재의 높은 하중으로 인해 문제점으로 작용한다. 고층 건물 건설시 하중이 커지게 되면 크리프가 발생하고 지반이 침식될 우려가 있으므로 기초를 크게 설계하고 암반층까지 깊게 내린 지정이나 파일등을 설치해야 하므로 공사비 및 재료비가 늘어 경제적 문제점이 있다. 콘크리트의 하중을 줄이기 위해 골재의 경량화를 진행하고 있다. 하지만 인공경량골재는 천연 골재에 비해 높은 흡수율과 낮은 부착강도로 인해 골재와 페이스트 사이의 계면에 영향을 주고 콘크리트 전체 강도에 영향을 미친다. 따라서 본 연구에서는 천연골재와 경량골재 종류별 계면을 파악하기 위해 비파괴 실험인 EIS측정 장비를 활용하여 전기저항을 측정하는 방식을 채택하였고, 경량골재 겉면을 고로슬래그 코팅을 통해 계면상태의 변화를 실험하였다. 실험결과, 골재 종류별 및 코팅유무에 따른 압축강도의 차이를 보였고, 경량골재 종류별 임피던스 값과 위상각의 차이를 보였다.

아세트알데하이드 흡착을 위한 활성탄의 첨착 및 개질 효과 (Effect of Impregnation and Modification on Activated Carbon for Acetaldehyde Adsorption)

  • 박진찬;김동민;이종대
    • Korean Chemical Engineering Research
    • /
    • 제61권3호
    • /
    • pp.472-478
    • /
    • 2023
  • 본 연구에서는 공기청정기 필터용 활성탄의 아세트알데하이드 제거 특성이 금속 촉매 첨착 및 관능기 도입 방법을 사용하여 조사되었다. 야자각 차의 KOH 활성화를 통해 고 비표면적(1700 m2/g)과 미세기공이 발달한 활성탄을 제조하였으며, 금속촉매 첨착과 관능기 개질을 위해 침지 후 기공 내 건조조건에 따른 첨착 효율을 조사하였다. 제조된 활성탄의 물성은 비표면적 및 기공 분석(BET), 유도결합 플라즈마 분광 분석(ICP), 유기 원소 분석(EA) 및 푸리에변환 적외선 분광 분석(FT-IR) 등을 통해 분석하였으며, 활성탄 성능 확인을 위해 침지 농도에 따른 아세트알데하이드 흡착성능을 가스크로마토그래피(GC)로 분석하였다. 첨착용액의 농도가 증가함에 따라 금속촉매 첨착량은 증가하였으며, 비표면적은 감소하는 경향을 보였다. 각 금속촉매 첨착 및 표면개질 활성탄의 파과시험 결과 MgO10@AC, CaO10@AC, EU10@AC, H-U3N1@AC 조성에서 우수한 아세트알데하이드 흡착성능을 보여주었다. 흡착성능이 가장 뛰어난 MgO10@AC에 대해 파과 시간은 533.8 분, 흡착량은 57.4 mg/g으로 측정되었으며, 이는 활성탄에 나노 크기의 MgO 촉매를 첨착할 경우 아세트알데하이드의 카보닐기와 상호작용하여 흡착성능이 개선됨을 알 수 있었다.

칫솔모 사이에 형성한 구멍 수에 따른 세균 양 변화 (Comparison of the amount of bacteria according to the number of holes between bristles)

  • 강경희;강소현;김소희;김지호;백수정;서현지;윤해연;궁화수
    • 대한치과의료관리학회지
    • /
    • 제6권1호
    • /
    • pp.19-27
    • /
    • 2018
  • The purpose of this study was to determine the level of toothbrush bacterial growth, whether the dryness of the toothbrush head differs depending on the number of holes in the head, and to use these results as a reference for future toothbrush design. Two-millimeter holes were created on the head of the toothbrushes in groups of three, one, or zero holes. We made the solution with Streptococcus mutans, and the toothbrushes were placed in the solution and agitated. The toothbrushes were shaken to remove moisture and allowed to air-dry. The toothbrush heads were swabbed with saline and then placed in two inoculation groups. The first group was inoculated with a 102 dilution of the S. mutans culture and the second was inoculated with the original culture. After incubation, bacterial colony numbers were measured. The number of holes on the toothbrush head correlated with a decrease in number of cultured bacterial colonies. Our model of a toothbrush head with holes indicated that these holes in the toothbrush head were effective in reducing the level of microbial contamination and that a greater number of holes creates an improved toothbrush sanitation effect. The average number of colonies on the head of toothbrush by number of holes was high, followed by the number of holes 0, 1 and 3, and the average number of colony among toothbrush heads was same. The use of a toothbrush with holes between the toothbrush head indicates that it is effective in reducing the level of microbial contamination between the toothbrush head and toothbrush and the higher the number of holes, the better the effect.

세척제 용매 중독 사례와 국내·외 규제 검토를 통한 할로겐화 용매 세척제 사용의 문제점 고찰 (Review of Problems with Use of Halogenated Cleaning Solvents Revealed through Case Studies of Cleaning Solvent Poisoning and Analysis of Domestic and Overseas Regulations)

  • 이나루;이혜진;정수진;이도희;신아롬
    • 한국산업보건학회지
    • /
    • 제33권4호
    • /
    • pp.517-527
    • /
    • 2023
  • Objectives: We examine cases of chemical poisoning that occurred in the cleaning of metal parts and the regulations on halogenated solvents in other countries and propose regulations necessary to prevent chemical poisoning from halogenated solvents. Methods: We collected cases of chemical poisoning through the website of the Korea Occupational Safety and Health Agency. A review of the literature was conducted focusing on regulations related to halogenated solvents in the United States and the European Union, particularly for cleaning metal parts. Among the Material Safety Data Sheets submitted to the government, MSDS containing eleven substances were extracted to confirm the composition and product use. We investigated cleaning methods for metal parts used in South Korea. For the hazard classification, the European Chemicals Agency or Japan's NITE's website was used. Results: In the case of poisoning, the cleaning methods involving trichloromethane were dipping and dry, which was not found in the literature. It was confirmed that many halogenated solvents and dimethyl carbonate were used for metal cleaning in South Korea. In vapor degreasing using TCE in the USA, even if the facility is strictly managed, such as by installing cooling coils in open cleaning facilities, the risk of exposure to TCE is considered to be not only carcinogenic but also a concern for acute and chronic effects. In comparison, exposure through Korean work methods such as dipping and drying operations is inevitably much higher. Conclusions: The transition to water-based cleaning with low-hazard chemicals should be a priority in the cleaning process. In the case of metal parts that require precise cleaning, if the use of a halogenated solvent is inevitable, a closed degreasing facility should be used to minimize exposure. The current regulations in the Occupational Safety and Health Act, the Chemical Substances Control Act, and the Air Environment Conservation Act do not require cleaning facilities to minimize emissions. To protect the health of workers using halogenated solvents to clean metal parts, regulations that require a fundamental reduction in exposure will be necessary.

필름기재 표면 코팅제의 첨가물질 조성 조건에 따른 수분산 안료잉크의 프린팅 성능 평가 (Printing Performance Evaluation of Water-dispersed Pigment Ink according to Additive Conditions of Film Substrate Surface Coating Agent)

  • 김혁진;서혜지;강은하;한민우;이동현;권동준;홍진표
    • 한국염색가공학회지
    • /
    • 제35권4호
    • /
    • pp.196-205
    • /
    • 2023
  • Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.

콘크리트 단면복구용 보수재료의 굵은 골재 최대치수 및 조립률에 따른 재료적 특성 (Material Properties Depending on the Maximum Aggregate Size and Fineness Modulus for Concrete Repair Materials)

  • 이선목;이병재;김윤용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제27권6호
    • /
    • pp.62-69
    • /
    • 2023
  • 본 연구에서는 보수재료에 굵은 골재를 사용하게 되면서 얻을 수 있는 효과를 검토하기 위해 굵은 골재의 최대치수 및 조립률을 다양화 하면서 콘크리트의 특성을 파악하는 기초 연구를 수행하였다. 그 결과 콘크리트의 슬럼프는 굵은 골재 최대치수가 커질수록 증가하였고, 공기량은 최대 골재 치수가 10 mm 이상인 배합군에 비해 최대 골재 치수가 5 mm 의 골재를 사용한 배합에서 공기량이 1.88~2.35 배 높게 측정되었다. 압축강도는 굵은 골재의 실적률에 많은 영향을 받는 것으로 나타났다. 실적률이 가장 높은 최대치수 20 mm 의 굵은 골재를 사용한 배합에서 압축강도가 가장 높게 측정되었으며 실적률이 가장 낮은 배합의 압축강도보다 45% 이상 높게 나타났다. 건조수축 측정결과 굵은 골재 최대치수 및 조립률의 변화에 따라 굵은 골재의 실적률이 높아지면서 건조 수축이 가장 낮게 측정되었고, 실적률이 가장 낮은 배합에서 가장 크게 나타났다. 본 연구를 통해 콘크리트 구조물 보수용 재료에 사용되는 굵은 골재의 최대치수 및 조립률을 다양화해서 입도를 조정하게 되면 강도 및 작업성이 우수해지고 건조수축을 줄일 수 있는 것을 확인 할 수 있었다.

스팀 및 동결 전처리가 건조 감잎 열수추출물의 이화학적 특성에 미치는 영향 (Physicochemical characteristics of hot-water leachate prepared from persimmon leaf dried after steaming or freezing treatment)

  • 정헌식;윤광섭;김종국
    • 한국식품저장유통학회지
    • /
    • 제30권6호
    • /
    • pp.983-990
    • /
    • 2023
  • 감나무(Diospyros kaki T.) 잎의 유효활용을 위한 가공저장 기술개발의 방편으로, 생잎의 건조 전 스팀 열처리나 동결처리가 열수 추출물의 이화학적 품질 특성에 미치는 영향을 조사하였다. 떫은 감잎을 무처리, 스팀 데치기(100℃, 30 sec) 또는 동결처리(-20℃, 15일)하고 열풍 건조(50℃, 12 h) 후 열수 추출(80℃, 10 min)하여 얻은 액의 이화학적 특성을 비교하였다. 기계적 색도 중 L*값(lightness)은 무처리구와 동결 처리구보다 스팀 처리구에서 높았으며, a*값(redness)은 대조구에서 가장 높았고, 스팀 처리구는 가장 낮은 값을 보였다. 흡광도로 측정한 갈변도는 대조구보다 동결 처리구에서는 높았지만 스팀 처리구에서는 낮았다. 가용성 고형분 함량은 스팀 처리구에서 가장 높았고 동결처리구에서 가장 낮았다. 유리당으로 sucrose, glucose, fructose가 검출되었으며, 스팀 처리구에서는 sucrose 함량이 동결처리구에서는 glucose와 fructose 함량이 상대적으로 높음을 보였다. 총폴리페놀 함량과 DPPH 유리기 소거능은 대조구보다 스팀 처리구에서는 높았고 동결 처리구에서는 낮았다. 이로써, 감잎의 수확 후 스팀 및 동결 전처리는 건조 감잎 열수 추출물의 수율, 색, 항산화능 및 성분 특성변화에 영향을 미치는 것이 확인되었다. 특히 동결처리는 분해와 갈변반응 촉진효과를 보였으며 이러한 효과가 필요한 경우에 유용할 것으로 판단된다.