• Journal of Advanced Marine Engineering and Technology
• /
• 제21권1호
• /
• pp.43-48
• /
• 1997

본 연구에서는 미분탄과 공기를 혼합하여 노즐을 통하여 바닥면에 캐비티가 존재한 사각단면 분류층 연소실로 분사 시킬 때에 분사된 혼합유동의 평균속도,농도 및 난류특성치들의 유체역학적 거동을 3차원 측정이 가능한 PDA를 이용하여 실험적으로 규명하였다. 바닥면의 재부착점은 X/D=15인 부근에서 나타나며, 재부착점 이후에서 부터 각 단면의 상사성이 이루어지는 것으로 나타났다. 사각 연소실 바닥면 관통의 영향을 받아 난류강도와 난류전단용력의 최대값은 중심축보다 높은 Y/D=6인 점에서 최대가 되며, 미분탄의 농도는 Y/D=6~8인 점에서 최대값이 나타났다.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.27-35
• /
• 2006

Al used in automobiles is mostly material, and according to the innovation of technique is in rapid development. Al die casting is an important field as today's trend of lightweight on automobiles. Valve housing in steering system improves driver's controling. The valve housing which is widely reliable to the most automobiles are developed this moment in our automobile industry. Therefore, they are produced by casting method which cost three times or even more expensive in production. If valve housing which is a part of steering system is produced by gravity casting, the space for manufacturing equipment will be increased, and more time and workers would be brought into service. For such reason, die casting would replace gravity casting in order to minimize cost of time, manpower, and working space. This study is the forming analysis of the 2 cavity die casting for automobile valve housing.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.958-962
• /
• 2002

This paper reports on the fabrication of free-standing microstructures by DRIE (deep reactive ion etching). SOI (Si-on-insulator) structures with buried cavities are fabricated by SDB (Si-wafer direct bonding) technology and electrochemical etch-stop. The cavity was formed the upper handling wafer by Si anisotropic etch technique. SDB process was performed to seal the formed cavity under vacuum condition at -760 mmHg. In the SDB process, captured air and moisture inside of the cavities were removed by making channels towards outside. After annealing (100$0^{\circ}C$, 60 min.), the SDB SOI structure with a accurate thickness and a good roughness was thinned by electrochemical etch-stop in TMAH solution. Finally, it was fabricated free-standing microstructures by DRIE. This result indicates that the fabrication technology of free-standing microstructures by combination SDB, electrochemical etch-stop and DRIE provides a powerful and versatile alternative process for high-performance bulk micromachining in MEMS fields.

• 치과방사선
• /
• 제19권1호
• /
• pp.137-147
• /
• 1989

CT findings of proven 25 malignant tumors of the maxillary sinus were retrospectively analyzed to be of help in the diagnosis and treatment. The results were follows: 1. Average age was 54 years old, and eighteen were males and seven were females with a ratio of 2.6:1 2. The most common histopathologic feature was squamous cell carcinoma (19 cases) and others were two cases of adenoid cystic carcinoma, one case of malignant fibrous histiocytoma, mucoepidermoid tumor, histiocytic lymphoma, unidentified malignant tumor. 3. CT findings were sinus opacificaqtion (4%), soft tissue mass (92%), low densities within soft tissue mass (44.%), air densities within soft tissue mass (24%), osteosclerosis (4%), bone destruction (92%), bone displacement (32%), fat plane obliteration (76%). 4. CT in the malignant maxillary sinus tumors approved the value in evaluation of tumor extension to nasal cavity, ethmoid sinus, orbit, infratemporal fossa, pterygopalatine fossa, pterygoid fossa, pterygoid muscle, cheek skin and intracranial cavity. 5. Twenty four cases (96%) were stage Ⅲ, stage Ⅳ according to AJCC TNM classification. 6. Bone findings were destruction, displacement, sclerosis and most frequent site of bone destruction was the medial wall of the antrum(92%). 7. Tumor growth pattern showed destructive pattern in 18 cases(72%), and squamous cell carcinoma showed destructive pattern. (P<0.05)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1470-1471
• /
• 2008

We present a front-side micromachined thermopile with high sensitivity in the 3-5${\mu}m$ window, and discuss its application to a novel non-dispersive infrared (NDIR) $CO_2$ gas sensor with a light source emitting collimated light. The micromachined thermopile shows a measured sensitivity of 30 mV/W and a $D^*$ of $0.3{\times}10^8cm^{\surd}Hz/W$. Using this newly fabricated thermopile, we also have successfully developed a small, sensitive NDIR $CO_2$ detector module for accurate air quality monitoring systems in energy-saving building and automotive applications. The novel sample cavity comprising specular reflectors around the light bulb is configured to uniformly emit collimated light into the entrance aperture of the cavity in order to enhance the sensitivity of NDIR $CO_2$ detector.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4036-4043
• /
• 1996

When a high-speed railway train enters a tunnel, a compression wave is generated ahead of the train and propagates along the tunnel, compressing and accelerating the rest air in front of the wave. At the exit of the tunnel, an impulsive wave is emitted outward toward the surrounding, which causes a positive impulsive noise like a kind of sonic boom produced by a supersonic aircraft. With the advent of high-speed train, such an impulsive noise can be large enough to cause the noise problem, unless some attempts are made to alleviate its pressure levels. In the purpose of the impulsive noise reduction, the present study tested the effect of porous walls on the compression wave propagating into a model tunnel. Experimental results were obtained using a shock tube with an open end. The results showed that the cavity/porous wall is very effective for the compression wave with a large nonlinear effect. The porosity of 30% is most effective for attenuation and pressure gradient reduction of the compression wave front. Also the impulsive noise reduction increases with increasing the length and height of the cavity, compared with the tunnel equivalent diameter.

• 대한후두음성언어의학회지
• /
• 제4권1호
• /
• pp.24-32
• /
• 1991

Cleft palate or velopharyngeal incompetence shows many disorders and disabilities affecting speech transmission. including distortion. substitution. and the nasalization of the vowels. The nasalized vowels are produced primarily by lowering of the velum. resulting in opening a side passage for the air flow through the nasal cavity. These abnormal movements give rise to complex modification of the physical property of the sound or in the sound spectrum. The authors employed Sonagraph$^{\circledR}$ as a sound analyzer in order to ascertain the features which characterize the nasalization of vowels. Twenty healthy Korean male adult voluteers were analyzed in artificial conditions of anterior and posterior nasal obstruction. and velo-pharyngeal incompetence. The results were as follows : 1) Fundamental frequency was not changed by nasal obstruction or velopharyngeal incompetence. 2) There was no significant difference of the formant intensity between normal and nasal vowels. 3) In VPI, a decrease of the frequency of $F_2$ was observed in /e/ and /i/ vowels(p<0.001). 4) In VPI, the $F_2$ was frequently missed in /o/ and /u/ vowels. 5) In the consonant spectra of VPI, the 'release burst' was usually not observed.

• Pediatric Infection and Vaccine
• /
• 제24권3호
• /
• pp.178-182
• /
• 2017

우리나라에서 폐흡충증은 1960년대 까지만 해도 매우 흔하여 폐의 공동 병변을 일으키는 주요 감염 원인이었으나 현재는 매우 드문 감염병이 되었다. 16세 남자가 갑자기 열감, 기침, 객혈이 발생하여 가슴 X-선 영상검사를 실시하였고, 공기음영(air bubble)을 포함하고 있는 결절과 간유리 음영으로 세균학적으로 결핵균이 확인되지 않았으나 결핵으로 진단받고 항결핵제로 치료를 받았다. 항결핵제 치료 후에 더 이상 기침 등의 증상은 호소하지 않았으나 가슴 X-선 영상검사와 가슴 컴퓨터단층촬영검사에서 병변이 악화되어 비디오 흉강경 구역절제술을 실시 받았으며 조직검사에서 폐흡충란이 발견되어 폐흡충증으로 진단된 증례를 경험하여 보고하고자 한다.

• Tuberculosis and Respiratory Diseases
• /
• 제40권4호
• /
• pp.449-453
• /
• 1993

A 64-year-old male was admitted due to abruptly developed, severe dyspnea via local clinic. He had been a heavy smoker and alcoholic for a long time. Chest PA showed huge haziness in right upper lung field. Sputum culture for bacteriology was positive for Klebsiella pneumoniae. Immediately, appropriate antibiotics were administered and artificial ventilation was started. On 40th hospital day, simple chest roentgenogram taken due to sudden aggravated dyspnea showed marked hyperlucency in right upper lung field, suggestive of rupture of abscess cavity and resultant pneumothorax. At that time, chest tube was inserted but air leakage from the chest tube persisted. Chest CT scan taken after chest tube insertion showed the tube inserted into a thin-walled cavity in the above lesion. on 84th hospital day, right upper lobectomy with decortication was performed. Pathologically, cavittary lung abscess was diagnosed on the findings of partial re-epithelialization of ciliated columnar epithelium with severe pulmonary vascular occlusion and extensive fibrous pleural adhesions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1341-1346
• /
• 2001

In this study, the acoustic properties of steel-wire sound absorbing materials with different thickness and bulk density were investigated in terms of characteristic impedance, propagation constant, and absorption coefficient. The well-known two-cavity method was used for evaluating those acoustic parameter values in experiments. Also, in order to validate the experimentally measured values, the results were compared with the results obtained from Chung and Blaser's transfer function method and SWR method. The experimentally measured values of normal absorption coefficients were generally agreed well with the corresponding values from the transfer function method and the SWR method. Based on the experimental results, the following conclusions could be made. The magnitude of the absorption coefficient and the frequency range of the maximum absorption coefficient were controllable by changing the thickness and bulk density of the sound absorbing materials. Also, the magnitude of the absorption coefficient depended on the characteristic impedance and the propagation constant. As large as the air cavity depth at the rear side of the steel-wire sound absorbing materials, the maximum magnitude of the absorption coefficient occurred at the lower frequency ranges.