• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 2020

Many types of optical plastic films are essential in optoelectronics display unit fabrication and it is important to develop high precision laser cutting methods of optical films with extremely low level of film surface contamination by fume particles. This study investigates the effects of suction and blowing air motions with air flow misalignment in removing fume particles from laser cut line by employing random particle trajectory simulation and probabilistic particle generation model. The computational results show fume particle dispersion behaviors on optical film under suction and blowing air flow conditions. It is found that suction air flow motion is more advantageous to blowing air motion in reducing film surface contamination outside designated target margin from laser cut line. While air flow misalignment adversely affects particle dispersion in blowing air flows, its effects become much more complicated in suction air flows by showing different particle dispersion patterns around laser cut line. It is required to have more careful air flow alignment in fume particle removal under suction air flow conditions.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.34-38
• /
• 2003

The lower and upper flash points of the flammable binary system, butylacetate+2-propanol were measured by air blowing tester. The shape of the concentration-temperature region of flash depended on the components of the mixture in solution. The experimental data were compared with the values calculated by the reduced model under an ideal solution assumption and the flash point-prediction models based on Van Laar equation. Good qualitative agreement was obtained with these models. The prediction results of these models can thus be applied to incorporate inherently safer design for chemical process, such as the determination of the safe storage conditions for flammable solutions.

• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.77-91
• /
• 2016

Recently, the spun blend yarns with staple fibers and filaments are being developed in the spinning process using an air blowing and electrostatic spinning technology(cyclone) in order to enhance the soft feeling and the fine count spun blend yarn manufacturing competitiveness. In this study, the appropriate separation condition of polyester multifilament was examined according to the treatment condition of conductive agents and voltage on polyester multifilament in the newly developed cyclone spinning process. And it was investigated the physical properties and dyeability of the cyclone wool/polyester spun blend yarns and its wool composite fabrics in comparison with existing sirofil wool/polyester spun blend yarn and its fabrics. As the result, it is determined that the newly developed cyclone wool/polyester spun blend yarn applied fabrics has a superior quality level in terms of practicality.

• 공업화학
• /
• 제22권6호
• /
• pp.664-671
• /
• 2011

무촉매 공기 브로잉 공정에서 석유계 감압 잔사유로부터 세미-부로운 아스팔트를 제조하는 경우, 시간에 따른 아스팔트의 조성, 구조, 물리적 성질의 변화를 조사하였다. 공기 브로잉에 의해 지방족 탄화수소 성분이 방향족 탄화수소 성분으로 전이되고, 고분자화 되어 아스팔텐 성분이 증가함을 박막크로마토그래피를 이용한 조성 분석에서 관찰하였다. 처리시간에 따른 방향족화와 고분자화 정도의 증가는 $^1H-NMR$, 열시차분석, 그리고 열중량분석에서도 확인할 수 있었다. 이러한 아스팔트의 조성과 구조의 변화는 침입도의 감소, 연화점과 인화점의 증가를 초래하였다.

• 한국식품저장유통학회지
• /
• 제22권1호
• /
• pp.154-157
• /
• 2015

신선편이용 절단배추의 선도유지 및 갈변 방지 목적으로 질소 치환 및 세라믹 칼날에 의한 절단 효과를 조사하였다. 저장 5일 이후부터 대조구에 비하여 NC 처리구의 중량변화와 갈변도가 적게 나타났다. 질소 치환과 세라믹 칼날의 사용에 의한 절단 공정의 개선이 절단채소의 선도 유지와 갈변 방지에 효과가 있을 것으로 생각된다.

• 한국유체기계학회 논문집
• /
• 제12권5호
• /
• pp.25-32
• /
• 2009

A study is conducted to improve the suction performance on suction devices which are used to remove polluted air generated by welding or machining process in a spacious working place of industry. Air-curtain is applied around the inlet of suction duct to interrupt the inflow of fresh air from the downstream region where is located opposite to the polluted air source. Two different air-curtain devices, such as a $45^{\circ}$ backward and a fully backward, are adopted. Suction region is experimentally investigated by measuring the suction velocities using a hot-wire anemometer. Contours of the suction velocity are compared with the computed results. The suction condition is selected to 110,000 Reynolds number which is widely used on typical suction devices, and a width of blowing passage for creating the air-curtain is chosen to 9.38% of the suction duct diameter. The experimental results show that the suction performance obtained with the $45^{\circ}$ backward air-curtain was better than that obtained with the fully backward air-curtain. On the suction duct using the $45^{\circ}$ backward air-curtain, the suction region estimated on basis of the 0.4m/sec is improved by 66% at the same input power.

• 산업식품공학
• /
• 제21권2호
• /
• pp.110-115
• /
• 2017

본 연구에서는 절삭식 정미기의 절삭롤러에 장착된 통풍간극링의 통풍구 수와 정백 중 발생하는 미강제거에 필요한 흡인 송풍속도가 정백특성에 미치는 영향을 구명하여 절삭식 정미기 개발의 기초자료를 제시하고자 하였다. 그 결과를 요약하면 다음과 같다. 백도는 모든 조건에서 $38{\pm}0.5$로 측정되어 균일하게 정백된 것으로 나타났다. 정백 후 곡온 상승은 송풍속도가 증가할수록 곡온 상승이 낮아지는 경향을 보였고, 절삭롤러 통풍구 수 3구, 송풍속도 35, 40 m/s 조건에서 각각 $15.4^{\circ}C$ $14.6^{\circ}C$로 나타났다. 동할미율은 절삭롤러 통풍구 수 3구, 송풍속도 35 m/s 조건에서 2.13%로 가장 낮게 측정되었다. 싸라기율은 모든 조건에서 0.762-0.869%로 낮은 범위를 보였다. 백미 1 ton을 생산하기 위한 에너지 소비량은 송풍속도가 증가할수록 감소하는 것으로 나타났다. 따라서 절삭식 정미기의 절삭롤러 통풍구 수와 미강제거를 위한 흡인 송풍속도에 따른 적정 정백조건은 곡온, 동할미율, 싸라기율의 품질적인 측면과 에너지 소비량 등을 고려할 경우 절삭롤러 통풍구 수 3구, 송풍속도 35 m/s 조건이 적절한 것으로 판단된다.

• Korea-Australia Rheology Journal
• /
• 제13권1호
• /
• pp.1-12
• /
• 2001

This paper describes the application of our recently developed two-phase model for flow-induced crystallization (FIC) to the simulation of fiber spinning and film blowing. 1-D and 2-D simulations of fiber spinning include the combined effects of (FIC), viscoelasticity, filament cooling, air drag, inertia, surface tension and gravity and the process dynamics are modeled from the spinneret to the take-up roll device (below the freeze point). 1-D model fits and predictions are in very good quantitative agreement with high- and low-speed spinline data for both nylon and PET systems. Necking and the associated extensional softening are also predicted. Consistent with experimental observations, the 2-D model also predicts a skin-core structure at low and intermediate spin speeds, with the stress, chain extension and crystallinity being highest at the surface. Film blowing is simulated using a "quasi-cylindrical" approximation for the momentum equations, and simulations include the combined effects of flow-induced crystallization, viscoelasticity, and bubble cooling. The effects of inflation pressure, melt extrusion temperature and take-up ratio on the bubble shape are predicted to be in agreement with experimental observations, and the location of the frost line is predicted naturally as a consequence of flow-induced crystallization. An important feature of our FIC model is the ability to predict stresses at the freeze point in fiber spinning and the frost line in film blowing, both of which are related to the physical and mechanical properties of the final product.l product.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.571-580
• /
• 2016

In this paper, performance of the gas turbine combined cycle(GTCC) using pre-combustion carbon capture technology was comparatively analysed. Steam reforming and autothermal reforming were used. In the latter, two different methods were adopted to supply oxygen for the reforming process. One is to extract air form gas turbine compressor (air blowing) and the other is to supply oxygen directly from air separation unit ($O_2$ blowing). To separate $CO_2$ from the reformed gas, the chemical absorption system using MEA solution was used. The net cycle efficiency of the system adopting $O_2$ blown autothermal reforming was higher than the other two systems. The system using air blown autothermal reforming exhibited the largest net cycle power output. In addition to the performance analysis, the influence of fuel reforming and carbon capture on the operating condition of the gas turbine and the necessity of turbine re-design were investigated.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.207-217
• /
• 2000

A new, high-efficiency ultrasonic fabric washing machine was developed to be an energy-efficient washing machine and to enhance fabric washing quality in washing processes of the dyeing and finishing process in the textile industry. This system is composed of ultrasonic wave generator, air blowing nozzle, torque motor for fabric tension control, and enclosed washing bath, multi-tube type exchanger, noiseless heater, air cylinder, expander roller, mangle upper and lower rollers, bend bar, dancer, shower spray nozzle, and solenoid valve, and so on. These elements are synergised for fabric washing. One of the very important principles is the low tension fabric running system. For an efficient washing effect, a counter flow system is also adopted. The new system also adopts the dancer and torque motor to control fabric tension and prevent fabric creasing. Shower spray nozzle, counter flow and overflow apparatus, and air-blowing apparatus are adopted to enhance the fabric washing effect. In this study, peach yoryu, exter, and moss crepe fabrics were washed by the general and ultrasonic washing systems under different conditions respectively. The washing efficiency was affected by the fabric running speed and characteristics of fabrics. Size content after washing increased with increasing the fabric running speed. The values in the general washing system were higher than those of the ultrasonic washing system. The changes of conductivity in the ultrasonic and the cooling bath were affected by the running time under the ultrasonic generating. The values of conductivity decreased as the experimental time passed.