• Korean Journal of Community Nutrition
• /
• v.17 no.3
• /
• pp.312-320
• /
• 2012

The purpose of this study was to investigate the perception of the school dietitian on superior agricultural products (SAP) and the status of using superior agricultural products in school meals. Questionnaires were distributed to 185 school dietitians after face to face interview, and a total of 181 responses were used for analysis. 82.3% of the respondents were using SAPs in school meals and there was a significant difference between elementary school (95.1%), middle school (76.8%) and high school (66.7%) dietitians (p < 0.001). 85.2% of the dietitians, who were using SAP, were purchasing SAPs through electronic bidding, and the main reason of not using SAPs was the higher price of SAPs than that of general agricultural products. The good agricultural practices (GAP) product was considered the most appropriate agricultural products for school meals by the majority of respondents (66.9%), and organic products was the next (13.3%). In addition, the most important selection criterion for a SAP perceived by school dietitians was safety (58.0%), and the main reason of using SAPs in school meals, when two choices were allowed, was 'to provide healthful food to children' (98.9%). The major barriers to using SAPs in school meals (two choices were allowed) were 'too expensive' (73.5%) and 'unstable supply' (32.6). In conclusion, it was suggested that there should be an improvement in SAP supply and management systems to increase the use of SAPs in school meals.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.9
• /
• pp.1196-1206
• /
• 2014

A metagenomic fosmid library was constructed using genomic DNA isolated from the gut microflora of Hermetia illucens, a black soldier fly. A cellulase-positive clone, with the CS10 gene, was identified by extensive Congo-red overlay screenings for cellulase activity from the fosmid library of 92,000 clones. The CS10 gene was composed of a 996 bp DNA sequence encoding the mature protein of 331 amino acids. The deduced amino acids of CS10 showed 72% sequence identity with the glycosyl hydrolase family 5 gene of Dysgonomonas mossii, displaying no significant sequence homology to already known cellulases. The purified CS10 protein presented a single band of cellulase activity with a molecular mass of approximately 40 kDa on the SDS-PAGE gel and zymogram. The purified CS10 protein exhibited optimal activity at $50^{\circ}C$ and pH 7.0, and the thermostability and pH stability of CS10 were preserved at the ranges of $20{\sim}50^{\circ}C$ and pH 4.0~10.0. CS10 exhibited little loss of cellulase activity against various chemical reagents such as 10% polar organic solvents, 1% non-ionic detergents, and 0.5 M denaturing agents. Moreover, the substrate specificity and the product patterns by thin-layer chromatography suggested that CS10 is an endo-${\beta}$-1,4-glucanase. From these biochemical properties of CS10, it is expected that the enzyme has the potential for application in industrial processes.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.12
• /
• pp.2082-2089
• /
• 2015

Avian beta-defensin 9 (AvBD9) is a small cationic peptide consisting of 41 amino acids that plays a crucial rule in innate immunity and acquired immunity in chickens. Owing to its wide antibacterial spectrum, lack of a residue, and failure to induce bacterial drug resistance, AvBD9 is expected to become a substitute for conventional antibiotics in the livestock and poultry industries. Using the preferred codon of Pichia pastoris, the mature AvBD9 peptide was designed and synthesized, based on the sequence from GenBank. The P. pastoris constitutive expression vector pGHKα was used to construct a pGHKα-AvBD9 recombinant plasmid. Restriction enzyme digestion was performed using SacI and BglII to remove the ampicillin resistance gene, and the plasmid was electrotransformed into P. pastoris GS115. High-expression strains with G418 resistance were screened, and the culture supernatant was analyzed by Tricine-SDS-PAGE and western blot assay to identify target bands of about 6 kDa. A concentrate of the supernatant containing AvBD9 was used for determination of antimicrobial activity. The supernatant concentrate was effective against Escherichia coli, Salmonella paratyphi, Salmonella pullorum, Pseudomonas aeruginosa, Enterococcus faecalis, and Enterobacter cloacae. The fermentation product of P. pastoris carrying the recombinant AvBD9 plasmid was adjusted to 1.0 × 10⁸ CFU/ml and added to the drinking water of white feather broilers at different concentrations. The daily average weight gain and immune organ indices in broilers older than 7 days were significantly improved by the AvBD9 treatment.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.3
• /
• pp.1-6
• /
• 2015

The rapid industrial development is facing problem due to energy depletion in Korea. So that, it can be necessary to develop alternative energy sources. Alternative energy like biofuels can be produced by using waste fuel, which is ecofriendly. As we know, the organic waste was banned to dump in landfill and ocean dumping. The most practicable method usually used to reduce organic waste is getting feedstuff or composting, considering the discharge characteristics of agricultural by-products waste treatment were selected. In this study, bio-coal was made using agriculture by product. Biocoal was prepared by adding 50 g of uniformly mixture into reactor and was carbonized at low temperatures 210, 220, and 230℃. The time of reaction was 1, 2 and 3 hours. Bio-coal approximately was similar to the standard of solid fuels. Other characteristics of fuel were also studied. The experiments which were analyzed were moisture content and calorific value, ash, chlorine, sulfur and heavy metals analysis as mercury, cadmium, lead, arsenic, and chromium. As a result, bio-coal 220℃, 2 hours was the optimal conditions while heating.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.12
• /
• pp.1953-1957
• /
• 2008

Recombinant Lactobacillus strains have been constructed using gene splicing by overlap extension (SOE). Primers were designed of which one end of an amplified product contained complementary sequences for an end of other amplified fragment. For efficient matching, we used an asymmetric PCR step that was effective at generating an excess of strands that would anneal in the final PCR. CP12, a recombinant fragment consisting of the integrase gene and attachment site of the bacteriophage A2, was constructed and inserted into the genome of Lactobacillus casei ATCC 393, yielding Lb. casei ATCC 393::XCP12. Another recombinant Lb. casei strain was constructed, where the egfp gene was a part of the construction. The EGFP produced from Lb. casei ATCC 393::XCEGFP14 was detected by Western blot hybridization. This simple and widely applicable approach has significant advantages over standard recombinant DNA techniques for Lactobacillus species.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.59-65
• /
• 2012

Torque Generator is a product which has function to transform hydraulic energy to mechanical energy of torque and rotating speed, and be used for direction change device of agricultural machines. This study proposes failure analysis and test analysis on torque generator and introduces a process that reliability of a product is enhanced by design improvement. And also it presents improvements of maximum output torque by modifying design and surface treatment. Lastly it verifies reliability improvement by analyzing test results of before and after life test.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.142.1-142
• /
• 2003

Mono-, diacylglycerol were synthesized by glycerolysis of bran oil and glycerol using IM60 (an immobilized lipase) in a stirred batch reactor for 72 hours. After glycerolysis, the composition TAG, DAG, MAG in product was 41.7%, 44.7%, and 11.1%, respectively. Glycerol was separated, then this mixture product was undergone fractionation for winterization followed. The fractionation was performed using hexane and acetone solvent to reduce palmitic acid at the low temperature for overnight individually. Temperature was set -40$^{\circ}C$, -14$^{\circ}C$, -8$^{\circ}C$ and 0$^{\circ}C$, respectively. By considering results from this experiments, fractionation with hexane at -8$^{\circ}C$ was most efficient regarding to yield without crystallization.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.6
• /
• pp.307-312
• /
• 2005

Since alpine upland in Pyungchang-gun has been typically applied every two or three years with saprolite, agricultural by-products are inputted to raise soil properties. Therefore, the effect of saprolite application on water quality in runoff and leachate should be monitored. To investigate water quality in runoff and leachate with various treatments of agricultural by-product, lysimeter with dimension of $0.85m{\times}1.75m{\times}0.30m$ was installed in Kangwon National University. Control, mixed compost with cow, chicken and sawdust by-product (CCSC), chicken manure by-product compost (CC), food waste by-product compost (FWC), and beer sewage sludge by-product compost (BSSC) at the rate of $10Mg\;ha^{-1}$ were mixed with soil in 25 cm depth, and water qualities in runoff and leachate were monitored from Jun. 4, 2004 to Oct. 18, 2004. EC ($0.8-2.2dS\;m^{-1}$) and concentrations of total N ($25-75mg\;L^{-1}$) and total P ($0.12-0.43mg\;L^{-1}$) were highest in both runoff and leachate of CC treatment. EC values in CC and FWC treatments continuously increased during lysimeter experiment, while total N and total P concentrations continuously decreased. Average total N concentrations in runoff taken from CCSC, FWC and BSSC treatments were 41, 34 and $37mg\;L^{-1}$, and in leachate were 35, 28 and $34mg\;L^{-1}$, respectively. Average total P concentrations were not different with different treatments. EC values in leachate were higher than those in runoff, and total N concentrations in runoff were higher than those in leachate.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.437-444
• /
• 2012

This study was aimed to minimized the impact force and vibration transmitted to transporting agricultural product from the power tiller trailer by installing vibration absorption device. The vibration absorbable trailer (I) mounted with leaf spring suspension and shock absorber was developed and compared on vibration absorption performance with the existing trailer (E) equipped no vibration absorption device. In order to identify the vibration absorption effect of the trailer developed in this study, the vibration accelerations, occurred during driving on paved road with loading 360 kg of pear, were measured and analyzed using FFT analyzer. The magnitude of average vibration acceleration was decreased highly for the improved trailer mounted with vibration absorption device in comparing with existing trailer in the frequency range under 60 Hz and under 80 Hz. And similar vibration absorption effect was represented for the improved trailer in all frequency range. Especially, in the frequency range between 40 Hz and 80 Hz, the magnitude of vibration acceleration for the improved trailer was decreased with 1/3 times in comparing with existing trailer. So, the transporting loss including damage of agricultural product could be decreased highly by using the improved vibration absorbable trailer mounted with leaf spring suspension and shock absorber simultaneously, designed in this study.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.105-112
• /
• 2023

In this paper, we propose a new method for displaying colored defects by measuring the relative density with the wide-area and local densities of X-ray. The relative density of one pixel represents a relative difference from the surrounding pixels, and we also suggest a colorization of X-ray images representing these pixels as normal and defective. The traditional method mainly inspects materials such as plastics and metals, which have large differences in transmittance to the object. Our proposed method can be used to detect defects such as sprouts or holes in images obtained by an inspection machine that detects X-rays. In the experiment, the products that could not be seen with the naked eye were colored with pests or sprouts in a specific color so that they could be used in the agricultural product selection system. Products that are uniformly filled with a single ingredient inside, such as potatoes, carrots, and apples, can be detected effectively. However, it does not work well with bumpy products, such as peppers and paprika. The advantage of this method is that, unlike machine learning, it doesn't require large amounts of data. The proposed method could be applied to a screening system using X-rays and used not only in agricultural product screening systems but also in manufacturing processes such as processed food and parts manufacturing, so that it can be actively used to select defective products.