• Journal of Microbiology and Biotechnology
• /
• v.22 no.7
• /
• pp.923-929
• /
• 2012

Optimization of culture conditions for L-asparaginase production by submerged fermentation of Aspergillus terreus MTCC 1782 was studied using a 3-level central composite design of response surface methodology and artificial neural network linked genetic algorithm. The artificial neural network linked genetic algorithm was found to be more efficient than response surface methodology. The experimental $_L$-asparaginase activity of 43.29 IU/ml was obtained at the optimum culture conditions of temperature $35^{\circ}C$, initial pH 6.3, inoculum size 1% (v/v), agitation rate 140 rpm, and incubation time 58.5 h of the artificial neural network linked genetic algorithm, which was close to the predicted activity of 44.38 IU/ml. Characteristics of $_L$-asparaginase production by A. terreus MTCC 1782 were studied in a 3 L bench-scale bioreactor.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.367-374
• /
• 2000

The composition of dissolved gases and nutrients in a liquid medium were determined for establishment of the optimum conditions for in vitro culture of Helicobacter pylori. A microaerobic condition facored by the organism was prepared by adjusting the partial pressure of the gas, agitation speed, and viscosity of the medium. The gaseous concentrations were controlled by utilizing CampyPak Plus that reduced oxygen while augmenting carbon dioxide. Agitation of the broth facilitated the oxygen transfer to the cells, yet inhibited the growth at high rates. An increase of viscosity in the medium repressed the culture although this variable was relatively insignificant. The chemical constituents of the liquid broth were examined to establish an economic model for H. pylori cultivation. The microbe required a neutral pH for optimum growth, and yet was also able to proliferate in an acidic condition, presumably by releasing the acidity-modulating enzyme, urease. Cyclodextrin and casamino acid were investigated as growth enhancers in place of serum, while yeast extract unexpectedly inhibited the cells. A low concentration of glucose, the unique carbon source for the organism, increased the cell density, yet high concentrations resulted in an adverse effect. Under optimally dissolved gas conditions, the cell concentration in brucella broth supplemented with serum substitutes and glucose reached $1.6{\times}10^8$ viable cells/ml which was approximately 50% higher than that obtained in the liquid medium added with only cyclodextrin or serum.

• Journal of Mushroom
• /
• v.6 no.1
• /
• pp.27-31
• /
• 2008

The optimization of submerged culture conditions for mycelial growth and exopolysaccharide (EPS) production in an edible mushroom Tremella fuciformis were studied in shake flasks and bioreactors. The temperature of $28^{\circ}C$ and pH 8 in the beginning of fermentation in agitated flasks was the most efficient condition to obtain maximum mycelial biomass and EPS. The optimal medium constituents were as follows (g l-1): glucose 20, tryptone 2, $KH_2PO_4$ 0.46, $K_2HPO_4$ 1 and $MgSO_4H_2O$ 0.5. The fungus was cultivated under various agitation and aeration conditions in a 5L stirred-tank bioreactor. The maximum cell mass and EPS production were obtained at a relatively high agitation speed of 200 rpm and at an aeration rate of 2 vvm. The flow behavior of the fermentation broth was Newtonian and the maximum apparent viscosity (35 cP) was observed at a highly aerated condition (2 vvm). The EPS productivity in an airlift reactor was higher than that in the stirred-tank reactor. The EPS was protein-bound polysaccharides consisted of mainly mannose, xylose, and fructose. The molecular weights of EPS were determined to be $1.3{\sim}1.5{\times}10^6$.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.160-166
• /
• 1999

High cell density cultivation of microalga Dunaliella bardawil using nitrogen fed-batch cultures was studied in batch flask. Optimum environmental conditions include concentrated nutrients except NaCl and carbon sources, carbon sources, pH, light, agitation, nitrate and phosphate ions. Cell growth, consumption rates of nitrate and phosphate ions were monitored. Optimal conditions for higher cell density were found to be(in the range tested): 5 times concentrated media(1 times-10 times concentrated media) pH 8.0 (7.0-9.0) white light(blue and red light) 15mM of nitrate (0.94-15mM) 250mM $NaHCO_3$ and $CO_2$ gas. However, the addition of phosphate ions did not enhance the algal maximum cell density and specific growth rate. Nitrate was found to be effective for the cell growth. The maximum cell density of fed-batch culture using nitrate ions in $8.955{\times}106$cells/ml after 189hr incubation.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.443-449
• /
• 1999

Bacillus subtilis BK-17 which produces a novel protease with fibrinolytic activity was isolated from soybean paste. Bioreactor production of the enzyme was studied in order to optimize fermentation conditions such as medium concentration, pH, agitation speed, and temperature. Under most cultural conditions, enzyme production initially began when the cell growth stopped. The onset of the enzyme production was indicated by rapid increase in both dissolved oxygen (DO) and pH. Two- to three-times more concentrated medium than the flask optimum medium yielded higher enzyme production in the bioreactor fermentation. When the medium pH was controlled constant, pH 6.5 exhibited the highest activity in the range of 6.0 to 7.5, but the activity was similar to the case when the pH was initially adjusted to 7.5 and subsequently maintained within a relatively wide range of 6.4 to 7.8. Agitation speed did not affect the enzyme production with an exception of DO reaching zero. Fermentation time was reduced when temperature increased within the range of $25^{\circ}C$ to$37^{\circ}C$. However, the highest activity, along with the slow decrease of the enzymatic activity after reaching the maximum value, was observed at $25^{\circ}C$. By shifting the temperature from $37^{\circ}C$ to $25^{\circ}C$immediately after DO reached the minimum level, the high enzyme production of 1,100 U/ml along with the short fermentation period of 13 h could be obtained.

• Microbiology and Biotechnology Letters
• /
• v.10 no.2
• /
• pp.87-93
• /
• 1982

The cultural conditions of Mucor plumbeus FRI 0007 were investigated for the maximum production of felt and lipid. It was found that the lower the pH and the higher the incubation temperature, the higher accumulation of the felt and lipid. Shake culture rendered higher lipid accumulation and lower felt accumulation than static culture. Maximum production of felt and lipid content were 47.8 g/$\ell$ and 50.73%, respectively, when the organisms were static-cultured at a temperature of 37$^{\circ}C$ and pH of 3.5 for 25 days latroscan thinchrographic analysis showed that the higher amount of triglyceride was obtained when static-cultured at a low pH. Fatty acid composition of the microbial lipid was affected by the incubation temperature, types of nitrogen source and speed of agitation: lower degree of saturation was observed as the incubation temperature decreased and the speed of agitation increased. Fatty acids of monoglyceride and diglyceride were mainly palmitic and oleic acids and those of triglycerides were mainly palmitic, oleic acids.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.621-627
• /
• 1999

A food waste composting apparatus of 450 L was designed for and tested with changing conditions of inlet air flow rate, agitation and inoculation. Agitation was done twice per day for 5 min and inlet air flow rate was set as 22.7 L/min for RUN 1. For RUN 2 and RUN 3, agitation was continuous, and inlet air flow rate was changed frequently as 10 L/min, 15 L/min and 20 L/min in order to maintain temp. above 5$0^{\circ}C$, and the concentration of $O_2$over 7 mol%. The compost of RUN3 was inoculated with 10 wt% of accomplished compost, and it was compared with RUN 1 and 2 to show the effect of inoculation. The composting rates of RUN 2 and RUN 3 were faster than that of RUN 1, because agitation was continuous and temperature was controlled in RUN 2 and RUN 3. Inoculated RUN 3 was better than RUN 1 and RUN 2 in the concentrations of $CO_2$and reduction of volatile solids. while the effect of inoculation on C/N ratios, pH change and the numbers of microoragnisms was not clearly appeared.

• Journal of Environmental Science International
• /
• v.25 no.9
• /
• pp.1233-1239
• /
• 2016

This study aimed to evaluate changes in the TN and TP removal efficiencies, depending on whether or not a settling process is applied, in a sequencing batch reactor (SBR) process with a membrane bioreactor (MBR). Nutrient removal was considered in terms of developing an advanced water treatment system for ships in accordance with water quality standards set forth by 227(64). For these purposes, the TN and TP concentrations in the inflow and outflow water were measured to calculate the TN and TP removal efficiencies, depending on whether or not a settling process was used. Water discharged from a bathroom, which was constructed for the experiment, was used as the raw water. The experiment that included a settling process was conducted twice, and the operating conditions were: aeration for 90 min, settling for 30 min, agitation for 15 min, and settling for 15 min for one experiment; and aeration for 150 min, settling for 45 min, agitation for 15 min, and settling for 15 min in the other. Operating conditions for the experiment that did not include a settling process were: aeration for 180 min and agitation for 60 min. The concentration of the mixed liquor suspended solids (MLSS) in the reactor was 3,500 mg/L, while the aeration rate was 121 L/min and the water production rate was 1.5 L/min. For the two experiments where a settling process was applied, the average TN removal efficiencies were 44.39% and 41.05%, and the average TP removal efficiencies were 47.85% and 46.04%. For the experiment in which a settling process was not applied, the average TN removal efficiency was 65.51%, and the average TP removal efficiency was 52.51%. Although the final nutrient levels did not satisfy the water quality standards of MEPC 227(64), the TN and TP removal efficiencies were higher when a settling process was not applied.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.642-647
• /
• 2003

In order to investigate utilization possibility of persimmon peel as a source of vinegar, we had been examined the alcohol and acetic acid fermentations of persimmon peel. In the first stage, alcohol fermentation, alcohol content was maximum value (8.22%) in 12.43 mL/g of added water, $12.41^{\circ}Brix$ of initial sugar content and 48.05 hr of fermentation time. Acidity was minimum value (0.30%) in 12.18 mL/g of added water, $13.72^{\circ}Brix$ of initial sugar content and 46.22 hr of fermentation time. In the second stage, acetic acid fermentation, acidity was maximum value (6.40%) in 2.02% of initial acidity, 67.98 rpm of agitation rate and 6.94 day of fermentation time. Browning color was minimum value in 1.50% of initial acidity, 150.0 rpm of agitation rate and 6.0 day of fermentation time. To manufacture persimmon vinegar using persimmon peel, in the first stage, optimal alcohol fermentation conditions was 12mL/g in added water, $12^{\circ}Brix$ in initial sugar concentration and 48 hr in fermentation time. In the second stage, optimal acetic acid fermentation conditions was 1.8% in initial acidity, 70 rpm in agitation rate and 6 day in fermentation time using Acetobacter sp. PA97.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.124-128
• /
• 2005

This studies were carried out to investigate optimal conditions for Lactic acid bacteria growth, which was grown in a batch fermenter. The optimal temperature was $30^{\circ}C$, optimal pH was 6.5 and agitation speed was 100rpm and didn't supply the air. Used media compositions were yeast extract 5g/L, peptone 10g/L, sugar 20g/L, beef extract 10g/L, tween 80 1ml/L, ammonium citrate 2g/L, sodium acetate 5g/L, magnesium sulfate 0.1g/L, manganese sulfate 0.05g/L, dipotassium phosphate 2g/L. These results would be useful for enhancing lactic acid bacteria concentration.