• Korean Journal of Materials Research
• /
• v.3 no.1
• /
• pp.43-49
• /
• 1993

Excellent deep drawability and strain aging rsistance are obtained by the addition of alloying elements such as Ti and Nb which can form carbide and nitride easily into Al killed extra low carbon steel. Recrystallization textures and mechanical properties of the three different extra low carbon steels with B containing Nb only, Ti only, and both Nb and Ti, respectively, along with have been compared. Inverse pole figure shows that (100) and (111) texture intensities of Nb containing steel changed a lot during the annealing treatment and the degree of texture-structural change in the steel containing both Nb and Ti is about the same as that in the Ti-containing 5teel. After annealing the pole figure shows that the {Ill} < 110 > and {112} < 110> textures are the strongest in the cold rolled state and the annealed state, respectively. However, there is little difference in texture structure among the three kinds of steels. There is a tendency that the steel containing both Nb and Ti the grain size of which is the smallest is the highest in hardness. Nb-containing steel is the next and Ti -containing steel is the last in hardness.

• Korean journal of applied entomology
• /
• v.15 no.3 s.28
• /
• pp.137-145
• /
• 1976

Orchids have been propagated vegetatively for a long time without adequate control measures against virus diseases in Korea. As a result, it is presumed that most of the orchid varieties in Korea may have been degenerated. Nevertheless there has been little work on the virus diseases of orchids in Korea. Therefore studies were initiated to isolate an4 characterize the orchid viruses occurring in Korea. The results obtained are summerized as follows. 1. Symptoms of virus diseases on orchid varieties can be grouped 1) mosaic, 2) necrotic streak with mosaic, 3) ring necrosis, 4) chlorotkc ring and 5) necrotic spot. 2. A total of 102 orchid plants representing 4 genera were investigated on the occurrence of Cymbidium mosaic virus and tobacco mosaic virus by serological agar-gel double diffusion test. The test revealed that approximately $45\%$ of the orchids were infected with Cymbidium mosaic virus. None of the plants were found to be infected with tobacco mosaic virus. 3. Local lesions appeared on the inoculated leaves of Chenopodium amaranticolor Cassia occidentalis and Datura stramonium 7-12 days after mechanical inoculation with Cymbidium mosaic virus. 4. Physical properties of the Cymbidium mosaic virus determined by inoculation on Chenopodium amaranticolor were as follows: Thermal inactivation Point; $75-80^{\circ}C$, dilution end Point; $10^{-5}-10^{-6}\%$ aging in vitro; 8 days. 5. Three different buffers at pH 7.0 and pH 9.0 were compared for the efficiency of agar-gel double diffusion test with Cymbidium mosaic virus. Phosphate, imidazol and tris buffer at pH 7.0 gave equally satisfactory results. 6. Electron microscopic examination of the Cymbidium mosaic virus revealed rod shaped particles measuring 460-580mu.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.751-756
• /
• 2013

This research old age chestnut tree that loss function chestnut leaf renewal efficiency enlargement and development of cosmeceutical product by purpose. Chestnut leaf (CL) exhibits numerous pharmacological effect including anti-allergy and anti-microbial properties. However, the anti-wrinkle effect of CL is not completely understood. In this study, to find a possible explanation for the anti-wrinkle effects of CL, we evaluated the effects of CL on radical scavenging activity, elastase inhibition activity and collagenase inhibition activity. CL was extracted with various solvents including water (CLW), 70% ethanol (CLE) and 70% acetone (CLA). The results showed that CLW, CLE, and CLA have the radical scavenging activity. In addition, we showed that CLW, CLE, and CLA have the elastase inhibition activity and collagenase inhibition activity. Consequently, the CL has a potent anti-wrinkle effect and it could be a useful cosmeceutical product for anti-aging purposes.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.104-111
• /
• 2016

Recently, the quantities of chemical material are increasing in chemical industries. At that time, release accident is increasing due to aging of equipment, mechanical failure, human error, etc. and industrial complexes found community properties in a specific area. For that matter, chemical release accident can lead to hight probability of large disaster. There is a need to analyze the boundaries optimal sensor placement calculated by selecting release scenarios through release condition and wether condition in a chemical process for release detection and response. This paper is to investigate chlorine release accident scenarios using COMSOL. Through accident scenarios, a numerical calculation is studied to determine optimized sensor placement with weight of detection probability, detection time and concentration. In addition, validity of sensor placement is improved by robustness analysis about unpredicted accident scenarios. Therefore, this verifies our studies can be effectively applicable on any process. As mention above, the result of this study can help to place mobile sensor, to track gas release based concentration data.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.67-74
• /
• 2009

The strength of concrete is one of the most important parameters in evaluating the properties of concrete. Compressive strength of concrete has been widely used because of its convenience of experiments and generality. Compressive strength of concrete varies according to materials and curing conditions. Even with the same materials, the strength varies according to the curing conditions. Therefore, if we want to know the strength of concrete from the construction field, we have to put it in exactly the same curing condition with the construction field. But it is impossible to make the exactly same curing conditions in the laboratory. Also damages occur in order to measure the strength of concrete, because the core hat to be made into the pavement. To overcome these limits, many studies of nondestructive method have already been researched. It was already proven that shear wave velocity was very closely related to the compressive strength. In this study, three different curing temperatures with the same mixture paste were used, and compressive strength and shear wave velocity, according to the aging were measured. The relationship between these two parameters was examined. As results, curing temperature affected the compressive strength and the shear wave velocity, but did not affect the relation between them.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.315-321
• /
• 2003

The integrity of the turbine rotors can be assessed by measuring the material properties at service temperature. In order to evaluate the remanent life of turbine rotor steel nondestructively, a measurement system of reversible magnetic permeability using an alternating perturbing magnetic field was constructed. We present a new non-destructive method to evaluate the remanent life of 1Cr-1Mo-0.25V steel using the value of reversible magnetic permeability. This method is based on the existence of reversible magnetic permeability in the differential magnetization around the coercive field strength. We measured the first harmonics voltage induced in a coil using a lock-in amplifier tuned to an exciting frequency. The Results of reversible magnetic Permeability and Wickers hardness on the aged samples show that the peak interval of reversible magnetic permeability (PIRMP) and Vickers hardness decreases as aging time increases. A softening curve is obtained from the correlation between Vickers hardness and the PIRMP. This curve can be used as a non-destructive method to evaluate the remanent life of turbine rotor steel.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.563-568
• /
• 2015

Liquiritin and its aglycone, liquiritigenin are flavonoid found in licorice that show anti-oxidant and anti-aging properties. In this study, ethosomes loaded with hydrophobic liquiritigenin or liquiritin were prepared as a transdermal delivery system. The particle size, entrapment efficiency, and skin permeability of ethosomes were evaluated. Ethosome containing liquiritigenin was stable up to 2 mM and ethosome containing liquiritin was stable up to 0.75 mM concentration. The particle size of ethosomes containing 0.75 mM liquiritigenin and liquiritin was 143.85 and 158.90 nm, respectively and the entrapment efficiency was 47.51 and 54.61%, respectively. The entrapment efficiency was improved with increasing concentrations of drugs. Ethosomes loaded with liquiritigenin or liquiritin were superior in skin permeation ability compared to that of 20% ethanol solution and conventional liposomes. These results suggest that ethosomes containing 0.50 mM liquiritigenin or liquiritin are effective for the skin permeation and may be used as an antiaging and antioxidant ingredient in cosmetic formulation.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.11-18
• /
• 2005

In order to accurately assess the stresses occurring in the early-age concrete, a compliance function which can consider the characteristics of early-age concrete is required. Existing compliance functions, however, have the limit that they have been deduced from the data of hardened concrete and therefore, do not take into account the fast development of material properties in early-age concrete. Furthermore, the distinction between instantaneous compliance and creep compliance is not clear in the existing experimental method. The purpose of present study is to propose a compliance function which can describe the rapid change of hardening processes in early-age concrete. To this end, a test method which can estimate the instantaneous compliance without creep effects in the early-age concrete was suggested first. Based on the suggested experimental method, tests on the instantaneous as well as creep compliance were performed using MTS automatic servo-loop test machine. The test results showed that both instantaneous and aging viscoelastic compliance, which are constants in B3 model, were functions in terms of age of concrete especially at early ages. Therefore, the modified compliance function based on B3 model was proposed to provide more realistic prediction on the behavior of early-age concrete. It is expected that the present model allows more realistic evaluation of varying stresses in concrete structures at early ages.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.77-84
• /
• 2005

The steel slag, a by-product which is produced by refining pig iron during the manufacture of steel, is mainly used as road materials after aging. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. However, steel slag used in this study was controled by a air-jet method which rapidly cools substance melted at a high temperature. The rapidly-chilled method would prevent from generation of free-CaO in steel slag. This study dealt with the influence of the using rate of rapidly-chilled steel slag on flow, dosage of SP, W/C ratio, and strength of mortar by statistical experimental design. Also, the results of this experiment were approved by statistical analysis methods, such as analysis of variance and F-testing. As results of F-testing, this paper proved at $1\%$ level of significance that the more the using rate of rapidly-chilled steel slag increased, the more this affected the enhancement of flow, the decrease of dosage of SP and W/C ratio, and the development of compressive strength. Also, considering the fluidity and compressive strength of mortar, it is desirable to use $75\%$ of rapidly-chilled steel slag for river sand.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

After selecting five types of adhesive epoxy resin for metallic cultural assets such as $Araldite^{(R)}$ rapid type, $Devcon^{(R)}$, $Araldite^{(R)}$ SV427+HV427, $CDK^{(R)}$520, $Araldite^{(R)}$ AW106+HV953 which had already been studied, this paper approached more closely the problem of yellowing and the signal of aging with time passing by connecting the problems with the safety of metallic cultural assets. The change of physical properties according to the change of state of epoxy adhesives was investigated through the change of flexural strength and the change of surface hardness by artificially providing the possible environmental change factors such as ultra-violet ray, and acid base, and how the epoxy chemically changes in its ingredients by the environment was analyzed through FT-IR. As a result of the experiment, for the most part of adhesives brought about the physical change of flexural strength, the change of surface hardness, and the chemical change of chemical ingredients as the product of alcohol, which were respectively different according to the time of ultraviolet irradiation, and acid base change. Under most of the conditions, SV427+HV427 and $CDK^{(R)}$520 were fairly stabilized under each condition of weatherability, but it seems that they should be refrained from being applied in case that the area to restore is thin and wide because the degree of flexural strength of themselves is low. Also, it is found that the preservation environment is very important not only for artifacts but also for the preservation of resins sused for preservation treatment.