• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.965-975
• /
• 2006

High pressure turbine blades are one of the key components in fossil power plants operated at high temperature. The blade is usually made of 12Cr steel and its operating temperature is above $500^{\circ}C$. Long term service at this temperature causes material degradation accompanied by changes in microstructures and mechanical properties such as strength and toughness. Quantitative assessment of reduction of strength and toughness due to high temperature material degradation is required for residual life assessment of the blade components. Nondestructive technique is preferred. So far most of the research of this kind was conducted with low alloy steels such as carbon steel, 1.25Cr0.5Mo steel or 2.25Cr1Mo steel. High alloy steel was not investigated. In this study one of the high Cr steel, 12Cr steel, was selected for high temperature material degradation. Electrochemical polarization method was employed to measure degradation. Strength reduction of the 12Cr steel was represented by hardness and toughness reduction was represented by change of transition temperature, FATT. Empirical relationships between the electrochemical polarization parameter and significance of material degradation were established. These relationship can be used for assessing the strength and toughness on the aged high pressure blade components indirectly by using the electrochemical method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권2호
• /
• pp.295-302
• /
• 2013

The aim of the study was to compare chemical composition and quality attributes of meat between male long fat tailed sheep (n = 17) and Small East African goats (n = 17) existing in Tanzania. Animals of 1.5 to 2 yrs in age and live body weight of $22.59{\pm}0.50$ kg were purchased from livestock auction markets. Animals were fasted for 18 h and slaughtered according to standard halal procedure. Left carcasses were dissected into muscles, fat and bone and the muscle and fat were mixed together and chemically analysed. Meat quality attributes were measured based on Muscle longissimus thoracis et lumborum excised from right sides of carcasses. Goat carcasses had significant higher (p = 0.0302) moisture content (70.65% vs 66.96%) and lower (p = 0.0027) ether extract (2.49% vs 5.82%) than sheep but there was no significant species differences in protein and ash content. Sheep had lower (p = 0.0157) ultimate pH (5.74 vs 5.88) and higher (p = 0.0307) temperature ($3.77^{\circ}C$ vs $3.15^{\circ}C$) than goat carcasses. Sheep meat had lower (p = 0.0021) shear force values (29.83 N vs 34.07 N) than goat. Within species, at day 9 of ageing, meat tenderness improved (p = 0.0001) by 44.63% and 34.18% for sheep and goat. Pooled data showed that at d 9 of ageing, meat tenderness improved (p = 0.0001) by 39.25% (from 39.54 N to 24.02 N) compared to tenderness of meat which was not aged at day one of slaughter. The present study demonstrated the differences in chemical composition and quality attributes of meat existing between sheep and goats originated from East Africa.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.840-845
• /
• 2017

In this paper, in order to investigate the lifetime of oil-paper insulation, specimens were artificially aged with thermal and electrical multiple stresses. Accelerated ageing factors and equivalent operating years for each aging temperatures were derived from results of tensile strengths for the aged paper specimens. Also, the evaluation for the multi-stress aged specimens were carried out through the measurement of impulse breakdown voltage at high temperature of $85^{\circ}C$. The lifetimes of the oil-paper insulations were calculated with the value of 66.7 for 1.0 mm thickness specimens and 69.7 for 1.25 mm thickness specimens throughout the analysis of impulse BD voltages using equivalent operating years, which means that dielectric strengths would not be severely decreased until the mechanical lifetime limit. Therefore, for the lifetime evaluation of the oil-paper insulation, thermal aging would be considered as a dominant factor whereas electrical degradation would be less effective.

• 열처리공학회지
• /
• 제20권5호
• /
• pp.243-249
• /
• 2007

The age hardening behavior and mechanical properties of an extruded Al-Zn-Mg-(Cu)-0.1 wt.%Sc alloy were investigated with the Sc addition and ageing temperature. The results showed that the $Al_3Sc$ compounds were formed by Sc addition and distributed preferentially along the extrusion direction. The age hardening of Al-Zn-Mg-Cu-0.1 wt.%Sc alloy which was treated by T6 process was more significant than that of Al-Zn-Mg-0.1 wt.%Sc alloy. The tensile property of Al-Zn-Mg-Cu+0.1 wt.%Sc alloy was also higher than that of Al-Zn-Mg-0.1 wt.%Sc alloy, which is 691 MPa and 584 MPa in strength and 9% and 11% in elongation, respectively.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.22-26
• /
• 2010

Material degradation should be considered to assess integrity and residual life of high temperature equipments. However, the property data reflecting degradation are not sufficient for practical use. In this study, mechanical properties of 1Cr-1Mo-0.25V casting steel generally used for turbine casing were measured and variation of microstructure was observed. Degradation was simulated by isothermal heat treatment.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 제34차 추계 국제 학술대회
• /
• pp.305-309
• /
• 2004

More a reddish color of KNBP was related to higher frequency of slower fiber type. Tender meat with a faster ageing rate for KNBP was coincided with a faster proteolytic rate, and likely a higher collagen solubility (data not shown). However, it is not confirmed whether the results were linked to the favorable pH/temperature window during rigor development, or fiber composition for tender meat.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.309-314
• /
• 2000

Rubber is used as a primary suspension component in a vehicle or a mechanical structure. The aim of this study is to establish a procedure for measuring the material properties of rubber and to analyze the differences of material properties of virgin rubber and heat aged rubber. The effect of mechanical conditioning was shown and included in the procedures of tensile. compression. simple shear. and pure shear tests. In addition. using engine oil was recommended for compression test in order not to have barrelling. Moreover, based on the material properties of vil·gin rubber and heat aged rubber. equations of C10 and IRHD were proposed as a function of heat aging temperature and time.

• Elastomers and Composites
• /
• 제21권3호
• /
• pp.205-212
• /
• 1986

The dielectric properties of natural rubber are very important to investigate the molecular structure. The charcteristics of the dielectric absorption in aging natural rubber were studied in the range of frequency from $1{\times}10^3Hz\;to\;3.2{\times}10^7Hz$ at the temperature of $23^{\circ}C$. As the results, it has been confirmed that in the case of aged NR vulcanized specimen with contained sulfur 2 phr above the specimens exhibit two kind of dielectic losses due to the the dipole polarization by impurities and sulfurs, and of raw rubber exhibit the kind of losses due the to dipole polarization. Particularly, it has been affirmed that the dielectric loss spectrum of the aging natural rubber is larger than that the natural rubber, and the dielectric strength of the aging natural rubber drop depreciate respctively.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.86-89
• /
• 2004

Recently polymer arresters are being used widely but we don't have appropriate long term characteristics test methods. Therefore we need to develop special test facility to evaluate long term reliability of polymer arresters. It's polymeric housing can be degraded by environmental stress and the interface between housing and inner module can be affected by moisture absorption. This moisture absorption can cause leakage current and tracking in the interface. We developed multi stress accelerated ageing test facility to simulate field conditions including UV, temperature, humidity, voltage, salt fog and rain. In addition, we carried out field exposure test at the outdoor test yard and characteristics analysis of field operated specimens to evaluate accelerating factor of this accelerated aging test.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.562-563
• /
• 2005

In case of aged porcelain, the failure in basic performance tests happened in cool-heat tests. Based on this characteristic, we studied the method predicting failure phenomena through more severe accelerated cool-heat ageing and accelerating thermal mechanical performance tests. Test results indicated that the thermal stress by temperature gradient was more severe parameter than thermal stress by quenching cycles within a category of standard or accelerating methods. And there is no the deterioration of statistic strength, but the deterioration of strength according to accelerating tests is serious.