• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.431-435
• /
• 2009

The apparatus has been fabricated using the laser diode and microprocessor unit. The apparatus used a InGaAlP laser diode for laser medical therapy and was designed for a pulse width modulation type to increase stimulation effects. To raise the stimulus effect of the human body, the optical irradiation frequency could be set up. The study has executed in-vivo experiment by employing our own developed laser diode irradiation system to investigate the effects of the InGaAlP laser diode irradiation on the wound healing as a preliminary study aimed at the application of InGaAlP laser diode to wound healing of human skin injury. The study cut out whole skin layers of Sprague-Dawley rat on the back part in 1 cm circle and observed developing effects after executing light irradiation for 9 days, and in result it is found that the light irradiation rat showed earlier wound healing than non-irradiation rat during the experimental period. In addition, there are some differences found regarding the healing process between laser diode irradiated rats and non-irradiated ones.

• Journal of Korean Medical classics
• /
• v.21 no.1
• /
• pp.13-26
• /
• 2008

Pediatrics in Geumwon(金元) age had fanned peculiar children's etiology, Byeonggihak(病機學) and Byeonjeungnon(辦證論) curative system grounded on medical theory in Geumwonsadaega(金元四大家). Yuwanso(劉完素), who was front-running man in that age, used so many times 'Yanggyeoksan(凉隔散)' or 'Bangpungtongseongsan(防風通聖散)' which have Hanryang(寒凉) disposition for curing children's disease in view of pathology in Yeoldahanso(熱多寒少), which is his special academic thought, after then Judangye(朱丹溪) succeed Yuwanso(劉完素)'s this view of pathology, Yang-eumjahyeol(養陰滋血) developed the one and made it a standing rule to cure children. Also Idongwon(李東垣) grasped that the main cause of disease is starvation because of war. As a result of it, he insisted on theory, internal cause's outbreak of person's illness, Naesangbiwi(內傷脾胃), Baekbyeong-yusaeng(百病由牛). In this view of this principle, he assorted and used following medicine 'Seungma(升麻), Siho(柴胡), Hwanggi' as 'Seungbalyanggi(升發陽氣)' method to cure children, and concentrated on children's spleen and stomach cure with this way. Jangjongjeong(張從政) applied 'Purgation therapy[攻下法]', Hantoha(汗吐下) centered on the theory of exogenous factors[外因說] , which explains that children's disease is Sagichimseup(邪氣侵襲), too. Like this, in Geumwon(金元) age, they had studied very seriously about main cause of children' s disease in two part, an internal cause and an external cause. Also, in pathological part they had approached academically 'Hwayeolchibyeong(火熱致病)' and 'Gigiseunggangsiljo(氣機乘降失調)' from diverse angles.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• Korean Journal of Oriental Medicine
• /
• v.2 no.1
• /
• pp.104-128
• /
• 1996

In the ancient times, the medical practice relied primarily upon human instincts and experiences at the same time, shaman's incantations were widely believed to cure diseases, the workings of evil spirits supposedly. For the period from the Old Chosun through Samhan(三韓), Chinese refugees brought a long medical knowledge and skills of the continent. New Chinese medicine, traditional practices and incantations were generally used at this time. In Samhan, however, the last was the most important, performed by a Chongoon(天君). Medicine and the medical system were arranged by the period of the Three Countries(三國時代). No definite record concerning Koguryo remains now. As for Paekje, however, history shows that they set up the system under the Chinese influence, assigning medical posts such as Euibaksa(醫博士, medical doctor), Chaeyaksa(採藥師, pharmacist), and Jukeumsa(呪禁師, medicine man) within Yakbu(藥部, department of medicine). Scientifically advanced, they sent experts to Japan, giving a tremendous influence on the development of the science in ancient Japan. After the unification of the three countries, Shilla(新羅) had theri own system after the model of Dang(唐). This system of the Unified Shilla was continued down to Koryo(高麗) and became the backbone of the future ones.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.73-79
• /
• 2020

Pursuing the fabric materials for military chemical warfare protective clothing with the improved detoxification properties, this study investigated the simple and effective cotton treatment method using pad-dry-cure process and 3-aminopropyltrimethox ysilane(APTMS) solution for surface amination. Detoxification properties of the untreated and treated cotton fabrics were evaluated via decontamination of chemical warfare agent simulant, DFP(diisopropylfluorophosphate). The surface aminated cotton fabric increased the rate of the hydrolysis of DFP by the factor of 3 and the decontamination ratio reached 88.2% after 24h. Therefore, the surface amination of the cotton fabric with APTMS can be an effective pathway to prepare the material for protective clothing against chemical warfare agents.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.445-458
• /
• 2007

The purpose of this study was to evaluate the bond strength of a new Single step system with different curing mode composites, and to evaluate the effect of the intermediate resins which have different hydrophilicity on bonding ability by means of the micro shear bond testing and TEM examination for the adhesive interface. The adhesive used in this study was an experimental single step system (Bisco Inc., Schaumburg IL). Experimental groups were produced by using six kinds of intermediate resin having different hydrophilicity that was hydrophilic, hydrophobic and most hydrophobic resin and as filled or not after applying adhesive. Each experimental group was further divided into two subgroups whether the adhesive was light cured or not. Dual cured composite (Bis Core, Bisco Ltd., Schaumburg, IL) was placed on the adhesive layer as light cure or self cure mode. The results or bond strength were statistically analyzed using one way ANOVA and multiple comparisons are made using Tukey's test at ${\alpha}\;<\;0.05$ level. The results of this study were as follows ; 1. The application of intermediate resin did not increase the bond strength for light cured composite. 2. The bond strength of an experimental adhesive with self cured composite was significantly increased by the application of intermediate resin layer. 3. The bond strength of adhesive was irrespective of the cure or not of itself before intermediate resin layer applied. 4. As applied hydrophilic resin layer was, the initial bond strength was higher than both hydrophobic and most hydrophobic one used but there was no significance. Using a single step adhesive with dual/self cured composite, the incompatibility between both of them should be solved by the application of intermediate hydrophobic resin to reduce the adhesive permeability. However, Single step adhesive can be used in the light cured composite restoration without any decrease of the initial bond strength.

• Journal of Oriental Neuropsychiatry
• /
• v.8 no.1
• /
• pp.95-109
• /
• 1997

In order to prove the experimental effectiveness of ChongsimOndamTang by categotizing COTⅠ, COTIⅡ, COTⅢ and COTⅣ according to the volume of COT extract,the anticonvulsion action, the antipyretic action, the analgesic action,the sedative action, and the activity of GABA transaminase, the actuvity concentration of GABA,the activity of GAD in GABAergic system comparing data with control group and observation data show the results as follows.1. The anticonvulsion effect on the convulsion induced by strychine it was significantly effective in COTⅣ and the time to death after the occurrence of the convulsion it was significantly effective in COTⅢ and COTⅣ, and the time to death after the occurrence the convulsion induced by the electrical shock of ECT unit it was significantly effective in all sample groups.2. The hypothemic effect was significantly effective in COT Ⅲ after 1 hour and 2 hour and was significantly effective COTⅣafter 1 hour and 4 hour, and the antipyretic effect on the febrile induced by endotoxin it was significantly effective in COTⅢ every 3 hour and was significantly effective in COTⅣ after 3 hour and 4 hour.3. The analgesic effect was significantly effective in COTⅢ and COTⅣ by decreasing the number of writhing syndrome.4. The sedative effect was decreased significantly all in COTⅢ and COTⅣ after 60 min, 90 min and 120 min.5. The activity of GABA transaminase was decreased significantly in COTⅡ and COTⅢ. 6. The activity concrntration of GABA was increased signifivantly in COTⅡ and COTⅢ. 7. The activity of GAD was increased significantly in COTⅡ and COTⅢ. The results show that ChongsimOndamTang can be an effective cure in mice on the anticonvulsion,the antipyretic , the analgesic,the sedative and the control of the GABAergic system in brain, and it can be used of the epilepsy and convulsive diseases clinically.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.1
• /
• pp.47-53
• /
• 2014

Objectives The aim of this review is to analyse the study tendency in papers related with sibjeondaebotang (Shiquan dabutang) which are published in Korea from 2000 to 2013. Methods We searched the four electronic database (NSDL, RISS, Korean traditional knowledge portal, OASIS) and checked relevant Korean journals from 2000 to 2013. We classified the papers by publish date, speciality, study method, and field of study, and analysed the study tendency. Results 1. 4 papers were published annually on average. 2. After classifying papers by the speciality of journal, continuous study was followed not only in korean medicine, but also in many specialities like Dietetics, Biotechnology and Pharmacology. 3. In study methods, clinical case was 29%, in vivo was 26%, and in vitro was 26%. 4. After classifying papers by field of study, beneficial effect was 62%, toxicity was 14%, qualitative analysis was 9%, and adverse effect and pharmacology was 3%. 5. In beneficial effect, it is effective in antioxidation, treatment and prevention of neurologic disease, skin disease, gynecologic disease and so on. It has also an effect in enhancing the immune system, improving the dysfunction of organs, and it can also be used for anticancer and anti-metastatic purpose. Conclusions These results suggest that Sibjeondaebotang (Shiquan dabutang) can be used as cure medicine, not just as herbal tonic, but there are not sufficient evidence based papers, so there should be further studies in order to establish Sibjeondaebotang as a cure medicine.

• Elastomers and Composites
• /
• v.33 no.4
• /
• pp.274-280
• /
• 1998

Order of reaction, rate constant, activation energy for vulcanization reaction, crosslinking density, and elastic constant of the network produced by sulfur curing were investigated on the SBR/BR blends containing silica and carbon black under same cure system. The reaction order was shown to be first order regardless of filler types. The carbon black filled rubber compounds showed higher rate constant compared to silica filled compounds. But activation energy appeared to be same regardless of filler type and rubber blend ratio. The crosslinking density and elastic constant is higher in the carbon black filled compound compared to silica filled compounds because of strong interaction between rubber and carbon black. On the other hand, crosslinking density and elastic constant were decreased with increasing the butadine rubber content in rubber blends. From the comparison of combined sulfur content in the vulcanized rubber, sulfur content in the silica filled compound become constant 20min later after reaction initiates but sulfur content in the carbon black filled compound become constant 10min later after reaction starts. The silica compound has a longer induction time ($t_2$) and optimum cure time($t_{90}$) compared to those of the carbon black filled compound.