• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(환경)
• /
• pp.585-595
• /
• 1994

The region of the respiratory tract where inhaled particles deposit can have important implications for the causation of local or systemic toxic effects. For most aerosols of occupational importance, respiratory tract deposition can be predicted from the aerodynamic diameter of the particles. With the advent of cascade impactors, particularly those of personal sampler size, the determination of the aerodynamic diameters of aerosols has become more common. Some limitations of cascade impactor use are well recognized (e.g., particle bounce and substrate overloading) and are generally correctable. However, two important limitations of the instruments may not be receiving adequate attention: relative humidity effects on potentially hygroscopic aerosols and the collection characteristics of fibrous aerosols as compared to their actual deposition site potential. The results of this study, when compared to results of previous controlled laboratory trials, suggest that, while potentially hygroscopic lead aerosols from lead acid battery plant operations do not appear to be affected by changes in plant environmental humidity levels, the potential - exists for significant size changes upon inhalation. Secondly, fibers were detected in aerodynamic size ranges that would be associated with deep lung deposition; however, upon microscopic examination, these same fibers would actually be predicted to deposit in the upper airways. This study suggests that the physicalchemical properties and morphological features of an aerosol should be carefully considered by industrial hygienists before cascade impactors are used in attempts to predict the effects of inhaled aerosols.

• Asian Journal of Atmospheric Environment
• /
• 제9권1호
• /
• pp.91-99
• /
• 2015

The Multi-wavelength Raman LIDAR (MRL) system was developed to enable a better understanding of the complex properties of aerosols in the atmosphere. In this study, the microphysical, optical, and radiative properties of mixed aerosols were retrieved using the discrete aerosol observation products from the MRL. The dust mixing ratio, which is the proportion of dust particles to the total mixed, was derived using the particle depolarization ratio. It was employed in the retrieval of backscattering and extinction coefficient profiles for dust and non-dust particles. The vertical profiles of aerosol optical properties were then used as input parameters in the inversion algorithm for the retrieval of microphysical parameters including the effective radius, refractive index, and the single scattering albedo (SSA). Those products were successfully applied to an analysis of radiative flux using a radiative transfer model. The relationship between the MRL derived extinction and aerosol radiative forcing (ARF) in short-wavelength was assessed over Gwangju, Korea. The results clearly demonstrate that the MRL-derived extinction profiles are a good surrogate for use in the estimation of optical, microphysical, and radiative properties of aerosols. It is considered that the analytical results shown in this study can be used to provide a better understanding of air quality and the variation of local radiative effects due to aerosols.

• Asian Journal of Atmospheric Environment
• /
• 제5권2호
• /
• pp.79-85
• /
• 2011

The purpose of this study is to evaluate the strength of the near-UV wavelength of 380 nm relative to visible and near-IR bands, and to find the suitable wavelength for detecting aerosols by using the Global Imager (GLI) sensor aboard the Advanced Earth Observing Satellite-II (ADEOS-II). Sensitivity analysis is performed for the retrieval of biomass burning aerosols by employing the radiative transfer model Rstar5b. It is determined that background surface reflectance in the blue band is similar to that in the near-UV band, and that wavelengths in the blue bands are more sensitive to the Aerosol Optical Thickness (AOT) than wavelengths in the near-UV band. The Total Ozone Mapping Spectrometer (TOMS) Aerosol Index (AI) is used in the indirect method used for aerosol retrieval, and the wavelength pair 380 nm and 460 nm is determined to be the most sensitive to the AOT. The results of this study suggest that wavelengths in the blue bands are suitable for detecting biomass burning aerosols over the Korean peninsula.

• 한국환경과학회지
• /
• 제26권5호
• /
• pp.591-600
• /
• 2017

This study was carried out to elucidate the chemical compositions of water-soluble inorganic ions in $PM_{10}$ and $PM_{2.5}$ aerosols collected during summer and winter in downtown Jejusi city. The ratios of $NO_3^-$ to the total mass of ionic species in $PM_{10}$ and $PM_{2.5}$ aerosols largely increase in winter compared to summer, while $SO_4^{2-}$ ratios in both aerosols appear to follow the opposite trend. Moreover, concentrations of $Na^+$, $Mg^{2+}$, $Ca^{2+}$ and $Cl^-$ in $PM_{10}$ and $PM_{2.5-10}$ aerosols are higher in winter than in summer. The nitrate concentrations in $PM_{10}$ and $PM_{2.5}$ aerosols increase with an identical increase in excess ammonium during winter, however, nitrate formation during summer is not important owing to ammonium-poor conditions.

• 대기
• /
• 제26권2호
• /
• pp.289-299
• /
• 2016

Optical properties of aerosols associated with haze events over Seoul were examined using ground-based skyradiometer and satellite-borne CALIOP and MODIS measurements over the 2009~2010 period. It is shown that aerosol optical thickness (AOT), ${\AA}ngstr{\ddot{o}}m$ exponents (${\alpha}$), and fine-mode particles increase during the haze events. The CALIOP-measured vertical profiles of aerosol during the haze events revealed that most of aerosols are loaded within layers below 4 km altitude. A large portion of these events appear to be related to the long-range transport of aerosols from China; about 35% and 18% of the haze events observed over Seoul were traced back to northern China and southern China, respectively. Compared with optical properties for locally-induced haze events (25%), these long-range transported aerosols are found to have relatively higher AOTs.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1043-1050
• /
• 2020

Radioactive aerosols are produced during the cutting of contaminated and activated metals. They must be collected and removed by a high-performing filtration system before releasing to the environment from the decommissioning workplace. The filtration system requires regular replacement to ensure the sufficient removal of radioactive aerosols because its filtration efficiency gradually decreases. This study evaluates the efficiency and lifetime of filters while cutting metals by using a plasma arc cutter. Particularly, this study considers the aerodynamic diameter distribution of number and mass concentrations for aerosols from 6 nm to 10 ㎛ when evaluating the performance of filters. After 20 time reuses for cutting operation performed in a cutting chamber, the removal efficiency is reduced from over 99 to below 93% at 2 ㎛. The results are used to analyze the lifetime of filters, the frequencies of their replacements, and impact on internal radiation dose.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2277-2288
• /
• 2021

To regulate the safety protocols in nuclear facilities, radioactive aerosols have been extensively researched to understand their health impacts. However, most measured particle-size distributions remain at low resolutions, with the particle sizes ranging from nanometer to micrometer. This study combines the high-resolution detection of 500 size classes, ranging from 6 nm to 10 ㎛, for aerodynamic diameter distributions, with a regional lung deposition calculation. We applied the new approach to characterize particle-size distributions of aerosols generated during the plasma arc cutting of simulated non-radioactive steel alloy wastes. The high-resolution measured data were used to calculate the deposition ratios of the aerosols in different lung regions. The deposition ratios in the alveolar sacs contained the dominant particle sizes ranging from 0.01 to 0.1 ㎛. We determined the distribution of various metals using different vapor pressures of the alloying components and analyzed the uncertainties of lung deposition calculations using the low-resolution aerodynamic diameter data simultaneously. In high-resolution data, the changes in aerosols that can penetrate the blood system were better captured, correcting their potential risks by a maximum of 42%. The combined calculations can aid the enhancement of high-resolution measuring equipment to effectively manage radiation safety in nuclear facilities.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.101-102
• /
• 2001

Monodisperse aerosols containing spherical particles of known size, shape and density are the most widely used to calibrate particle-size measuring instruments and to determine the effects of particle size on the sampling device. However, these tests are time-consuming because monodisperse aerosols with different particle sizes are generated and tested in a series of experiments. Polydisperse aerosols may be used to determine the calibration or to simulate equipment under controlled laboratory condition. (omitted)

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.389-390
• /
• 2001

Deposition of polydisperse aerosols by Brownian diffusion was studied analytically using the penetration efficiency of monodisperse aerosols combined with the correlations among the moments of lognormal distribution functions. The analytic solutions so obtained were validated using the exact solution were applied to recalculate the filtration efficiencies of the existing experimental data for various filtration conditions. (omitted)

• 대기
• /
• 제20권1호
• /
• pp.49-61
• /
• 2010

Atmospheric aerosols play a crucial role for changing climate, resulting in a wide range of uncertainty for future climate prediction. In this paper we review current international research status and trend of climate-related aerosol science. There have been carried out a number of campaigns (including ACE-Asia, TRACE-P, ABC, and so on) and special experiments with some modeling studies over Korea, East Asia, and the Northwestern Pacific to characterize the various properties (physical, chemical, optical, and radiative) of Asian aerosols and evaluate their climate forcing impacts. But some parts of the aerosol research may need to be improved, advanced, or newly launched. Especially, a chemical transport model (CTM) embedded by a general circulation model (GCM) should be developed by the national scientific community with a high research priority, actively collaborating with international community in order to estimate direct and indirect global radiative forcing due to anthropogenic and natural aerosols.