• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.364-372
• /
• 2023

The space reactor is the primary energy supply for future space vehicles and space stations. The radiator is one of the essential parts of a space reactor. Therefore, the research on radiators can improve the heat dissipation power, reduce the quality of radiators, and make the space reactor smaller. Based on MOOSE multi-physics numerical calculation platform, a simulation program for the combination of heat pipe and fin at the end of heat pipe radiator is developed. It is verified that the calculation result of this program is accurate and the calculation speed is fast. Analyze the heat transfer characteristics of the combination with heat pipe and fin, and obtain its internal temperature field. Based on the calculation results, the influence of structural parameters on the heat dissipation power is analyzed. The results show that when the fin width is 0.25 m, fin thickness is 0.002 m, condensing section length is 0.5425 m and heat pipe radius is 0.014 m, the power-mass ratio is the highest. When the temperature is 700K-900K, the heat dissipation power increases 41.12% for every 100K increase in the operating temperature. Smaller fin width and thinner fin thickness can improve the power-mass ratio and reduce the radiator quality.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1587-1592
• /
• 2023

Time-encoded imagers (TEI) are important class of instruments to search for potential radioactive sources to prevent illicit transportation and trafficking of nuclear materials and other radioactive sources. The energy of the radiation cannot be known in advance due to the type and shielding of source is unknown in practice. However, the response function of the time-encoded imagers is related to the energy of neutrons or gamma-rays. An improved image reconstruction method based on MLEM was proposed to correct for the energy induced response difference. In this method, the count vector versus time was first smoothed. Then, the preset response function was adaptively corrected according to the measured counts. Finally, the smoothed count vector and corrected response were used in MLEM to reconstruct the source distribution. A one-dimensional dual-particle time-encode imager was developed and used to verify the improved method through imaging an Am-Be neutron source. The improvement of this method was demonstrated by the image reconstruction results. For gamma-ray and neutron images, the angular resolution improved by 17.2% and 7.0%; the contrast-to-noise ratio improved by 58.7% and 14.9%; the signal-to-noise ratio improved by 36.3% and 11.7%, respectively.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.299-313
• /
• 2024

Electrochemical machining (ECM) is an effective manufacturing method for difficult-to-machine materials and is widely used in the precision manufacturing of aerospace components. In recent years, the requirements for the machining accuracy and surface integrity of ECM have become increasingly stringent. To further improve the machining quality, this work investigated the intricate laws between electrolyte filtration accuracy and machining quality. Electrolytes with different filtration accuracies were compared, and a numerical simulation was used to evaluate the change in temperature and bubble rate of the flow field in the machining area. Experiments were conducted on ECM of Ti-6Al-4V (TC4) alloy workpieces using electrolytes with different filtration accuracy. The workpiece machining accuracy and surface quality were analyzed, and the repetition accuracy of the workpiece was evaluated. The intricate laws between electrolyte filtration accuracy and machining quality were explored. It was found that when the electrolyte filtration accuracy is improved, so too is the machining quality of the ECM. However, once the filtration accuracy has reached a certain value, the machining quality has extremely limited improvement. By evaluating the repetition accuracy of processed workpieces in electrolytes with different filtration accuracies, it was found that when the filtration accuracy reaches a certain value, there is no positive correlation between the repetition accuracy and filtration accuracy. The result shows that, for the workpiece material and conditions considered in this paper, an electrolyte with 0.5㎛ filtration accuracy is suitable for the wide application of precision ECM.

• Wind and Structures
• /
• v.9 no.3
• /
• pp.245-254
• /
• 2006

The pressure and drag measurements were carried out in the wind tunnel to investigate the drag reduction of the disk by using an interference rod placed upstream. The results indicate that there is a pair of standing vortices in the front stagnation region of the disk induced by the rod. The standing vortices can decrease the pressure on the disk upwind side; hence it can reduce the drag of the disk. With an increasing rod diameter, the standing vortices are strengthened and more drag reduction can be achieved for the disk. With rod diameter d/D = 0.05 (d, D are the diameters of rod and disk, respectively), the total drag of the disk can be reduced by about 9% compared with that of the bare disk.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.2109-2123
• /
• 2017

This paper presents a super-resolution reconstruction method based on sparse representation for two-dimensional bar code images. Considering the features of two-dimensional bar code images, Kirsch and LBP (local binary pattern) operators are used to extract the edge gradient and texture features. Feature extraction is constituted based on these two features and additional two second-order derivatives. By joint dictionary learning of the low-resolution and high-resolution image patch pairs, the sparse representation of corresponding patches is the same. In addition, the global constraint is exerted on the initial estimation of high-resolution image which makes the reconstructed result closer to the real one. The experimental results demonstrate the effectiveness of the proposed algorithm for two-dimensional bar code images by comparing with other reconstruction algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.408-411
• /
• 1995

In this paper, we discuss the force control of flexible manipulators. Since the force control of flexible manipulators with planar one or two links using the distributed-parameter modeling has been the subject of a considerable number of publications until now, real time computations of the force control schemes are possible. But, application of those control schemes to multi-link spatial manipulators is fairly complicated. In this paper, we apply a concise hybrid position/force control scheme for a flexible manipulators. We use a lumped-parameter modeling for the flexible manipulators. The Hamilton's principle is applied to derive the equations of motion for the system and then, state-space model is obtained by the Lagrange's method. Finally, comparison of simulation results with experimental results is given to show the performance of our method.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.24-33
• /
• 2001

As we know, the quality of processes is technically depicted by variation, a product or process with the best quality must naturally require the variation as less as possible. The variation is usually reduced with many ways, say, by adjusting parameters settings under robust design with many turns expensive experiments. So ones are trying to reach the robustness by detecting cheap and simple methods. In this paper, a both practical and simple technique for quality improvement, namely reducing the variation, by data classification is studied. First, all possible system factors are included, which may dominate the variation law. And then we make use of the past observations and their classification as well as boxplot charts to find out the internal rule between the variation and the system factor. Next, adjust the location of the system factor according to the rule so that the variation could, to some extent, be lessened. Finally, two typical quality improvement cases based on data classification are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4556-4572
• /
• 2015

Dynamic texture (DT) recognition is a challenging problem in numerous applications. In this study, we propose a new algorithm for DT recognition based on group sparsity structure in conjunction with chaotic feature vector. Bag-of-words model is used to represent each video as a histogram of the chaotic feature vector, which is proposed to capture self-similarity property of the pixel intensity series. The recognition problem is then cast to a group sparsity model, which can be efficiently optimized through alternating direction method of multiplier algorithm. Experimental results show that the proposed method exhibited the best performance among several well-known DT modeling techniques.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4118-4136
• /
• 2014

To preserve the spatial consistency of low-level features, generalized Riesz-wavelet transform (GRWT) is adopted for fusing multi-modality images. The proposed method can capture the directional image structure arbitrarily by exploiting a suitable parameterization fusion model and additional structural information. Its fusion patterns are controlled by a heuristic fusion model based on image phase and coherence features. It can explore and keep the structural information efficiently and consistently. A performance analysis of the proposed method applied to real-world images demonstrates that it is competitive with the state-of-art fusion methods, especially in combining structural information.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.425-426
• /
• 2017

본 논문에서는 Google에서 지원하는 오픈소스인 Tesseract-OCR을 이용한 문자/음성 인식 및 번역 앱에 대해 제안한다. 최근 한국어를 포함한 외국어 인식과 번역기능을 이용한 다양한 스마트폰 앱이 개발되어 여행에 필수품으로 자리잡고 있다. 스마트폰의 카메라기능을 이용하여 촬영한 영상을 인식률을 높이도록 처리하고, Crop기능을 넣어 부분 인식기능을 지원하며, Tesseract-OCR의 train data를 보완하여 인식률을 높이고, Google 음성인식 API를 이용한 음성인식 기능을 통해 인식된 유사한 문장들을 선택하도록 하고, 이를 번역하고 보여주도록 개발하였다. 번역 기능은 번역대상 언어와 번역할 언어를 선택할 수 있고 기본적으로 영어, 한국어, 일본어, 중국어로 번역이 가능하다. 이 기능을 이용하여 차량번호 인식, 사진에 포함된 글자를 통한 검색 등 다양한 응용분야에 맞게 앱을 개발할 수 있다.