• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.935-938
• /
• 2002

The degree of contamination in outdoor insulation system is one of the most importance factor to determine the level of insulation, and the salt is known as the most dangerous contaminants in the most region of the world. In a macroscopic point of view, as shown through the preceding study, the generation and deposition of salt contaminants has a great relation with the geographical conditions and the meteorological conditions, such as, wind velocity, wind direction, precipitation and so forth. However, in the aspect of microscopic analysis, the pollution mechanism has a great relation with aerodynamic properties of insulator, originated from the profile of insulators, and the non-uniform deposition is unevitable. So, in this investigation, we had make a experiment to seize the electrical properties of non-uniformly contaminated insulator. The results of this investigation could be used as a good groundwork in the determination of outdoor insulation design.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.483-491
• /
• 2016

A simple aerodynamic calculation program for high Mach number flow is developed by combining the modified Newtonian method with Tannehill's curve fits for the thermodynamic properties of air in equilibrium state. Aerodynamic characteristics for a parabolic nose are predicted and compared with CFD(Computational Fluid Dynamics) analysis results. Comparison shows good agreements, and the developed program is expected to be a practical tool for slender body aerodynamic calculation for high Mach number flow.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.84-89
• /
• 1998

This paper describes aerodynamic heating on a hypersonic vehicle. For this purpose, the 2-D, and 3-D equilibrium code are developed. In order to obtain an accurate solution, AUSMPW+ is used for spatial discretization. Curve fitting data in NASA Reference Publication 1181, 1260 are used to calculate equilibrium properties. To observe aerodynamic heating phenomena, Reynolds number parametric study for diamond airfoil is done, 3-D full Navier-Stokes equation is computed and wall temperature distribution data are obtained. Analyzing these results, we conclude that Reynolds number and secondary flow are important factors in aerodynamic heating.

• Wind and Structures
• /
• v.2 no.2
• /
• pp.95-104
• /
• 1999

The dynamic properties of one-span or multi-span reinforced concrete footbridges of catenary form (see e.g., Fig. 1) include the very low fundamental natural frequency, usually near the step-frequency of pedestrians, and the low damping of bending vibrations. The paper summarized the results of model as well as full-scale measurements with particular reference to the influence of torsional rigidity of the stress-ribbon on the magnitude of aerodynamic response, the results of measurements on footbridges of catenary form being completed by results obtained on footbridges of some other types. Additionally the influence of the local broadening of the bridge deck on the bridge response was tested. Starting from these results the criterion has been derived for the decision, whether the flutter analysis is necessary for the design of the footbridge.

• Speech Sciences
• /
• v.8 no.4
• /
• pp.131-138
• /
• 2001

Sound pressure level, subglottic air pressure, vital capacity, adduction/abduction rate, and phonatory efficiency were measured in 19 opera singers, 17 Korean traditional 'Pansori' singers, and 20 non-singers; subjects' mean age was 25.9(SD=7.2) and the singers had been singing professionally for 5-10 years. One-way ANOVA and Scheff$\w'{e}$ post-hoc analysis were used to analyze aerodynamic data and to identify significant differences among groups. Sound pressure level, peak subglottic air pressure, and phonatory efficiency were found to be significantly different among three groups of the subjects. Differences in aerodynamic properties were discussed for their significance in diagnosis and treatment of voice disorders in professional singers.

• Structural Engineering and Mechanics
• /
• v.20 no.4
• /
• pp.435-450
• /
• 2005

Here, the dynamic instability characteristics of aero-thermo-mechanically stressed functionally graded plates are investigated using finite element procedure. Temperature field is assumed to be a uniform distribution over the plate surface and varied in thickness direction only. Material properties are assumed to be temperature dependent and graded in the thickness direction according to simple power law distribution. For the numerical illustrations, silicon nitride/stainless steel is considered as functionally graded material. The aerodynamic pressure is evaluated based on first-order high Mach number approximation to the linear potential flow theory. The boundaries of the instability region are obtained using the principle of Bolotin's method and are conveniently represented in the non-dimensional excitation frequency-load amplitude plane. The variation dynamic instability width is highlighted considering various parameters such as gradient index, temperature, aerodynamic and mechanical loads, thickness and aspect ratios, and boundary condition.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.241-263
• /
• 2022

The conventional wind and twisted-wind effect on aerodynamic properties of neighboring buildings arranged in side-by-side and tandem systems at 2B and 5B spacings are systematically investigated by large eddy simulation. Different physical interactions between different wind profiles and neighboring buildings will be deeply understood. The neighboring-building system under two different types of wind profiles, i.e., conventional wind profile (CWP), twisted wind profiles (TWP) with the maximum twisted angle of 30°, is used to evaluate the variation of physical mechanism between wind and buildings. Aerodynamic characteristics including mean and RMS pressure coefficient, and velocity field were systematically analyzed and compared between different scenario. It was found that the distribution of mean pressure, root-mean-square x velocity and the streamline of wind flow for TWP greatly deviated from CWP, and the effect of TWP on the downstream building, was drastically different from that of CWP, such as the size of vortexes after the lower stream building being bigger when exposed to TWP, and the mean pressure distribution on the building surfaces are also different. Moreover, evidence of buildings arranged in side-by-side and tandem configurations having interchangeable properties under TWP was also discovered, that two buildings being arranged side-by-side exposed to TWP could be identified as being arranged in tandem with a different wind twist angle, or vice versa.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.145-154
• /
• 2013

Recently, damage occurrence by wind erosion has been increasing in society. In times past, such problems only took place in desert area ; however, in recent years, the wind erosion problem is spreading out to agricultural land. Wind erosion in agricultural land can cause loss of loam soils, the disturbance of the photosynthesis of the crop fields and serious economic losses. To overcome the mentioned problems, installation of windbreak fence can be recommended which function as disturbing strong wind and wind erosion. However, there is still no proper guideline to install the windbreak fence and the installation used to rely on the intuition of the workers due to the lack of related studies. Therefore, this study measured the aerodynamic resistance of screens of the windbreak fence using the apparatus for testing screens. The apparatus for testing screens was designed to measure pressure loss around the screen. Measured pressure loss by wall friction compensated for pressure loss to calculate the aerodynamic resistance of screens. The result of pressure loss by regression analysis derived the aerodynamic coefficient of Darcy-Forchheimer equation and power law equation. The aerodynamic resistance was constant regardless of the overlapped shape when the screen was overlapped into several layers. Increasing the number of layers of the screen, internal resistance increased significantly more, and pressure loss caused by the screen also increased linearly when the wind speed was certain conditions, but permeability had no tendency. In the future, the results of this study will be applied to the computational fluid dynamics simulation. The simulation models will be also validated in advance by wind tunnel experiments. It will provide standard of a design for constructing windbreak fence.

• Speech Sciences
• /
• v.7 no.1
• /
• pp.109-141
• /
• 2000

Acoustic and aerodynamic characteristics of Cheju consonants were examined with the focus on the well-known three-way distinction among stops (i.e., lenis, fortis, aspirated) and the two-way distinction between sand s*. Acoustic parameters examined for the stops included VOT, relative stop burst energy, Fo at the vowel onset, H1-H2, and H1-F2 at the vowel onset. For the fricatives s and s*, acoustic parameters were fricative duration, Fo, centroid of the fricative noise, RMS energy of the frication, H1-H2 and Hl-F2 at the onset of the following vowel. In investigating aerodynamics, intraoral pressure and oral flow were included for the bilabial stops. Results indicate that, although Cheju and Korean are not mutually intelligible, acoustic and aerodynamic properties of Cheju consonants are very similar in every respect to those of the standard Korean. Among other findings there are three crucial points worth recapitulating. First, stops are systematically differentiated by the voice quality of the following vowel. Second, stops are also differentiated by aerodynamic mechanisms. The aspirated and fortis stops are similar in supralaryngeal articulation, but employ a different relation between intraoral pressure and flow. Finally, our study suggests that the fricative s is better categorized as 'lenis' than as 'aspirated' in terms of its phonetic realization.

• International Journal of High-Rise Buildings
• /
• v.2 no.3
• /
• pp.213-228
• /
• 2013

Tall buildings have been traditionally designed to be symmetric rectangular, triangular or circular in plan, in order to avoid excessive seismic-induced torsional vibrations due to eccentricity, especially in seismic-prone regions like Japan. However, recent tall building design has been released from the spell of compulsory symmetric shape design, and free-style design is increasing. This is mainly due to architects' and structural designers' challenging demands for novel and unconventional expressions. Another important aspect is that rather complicated sectional shapes are basically good with regard to aerodynamic properties for crosswind excitations, which are a key issue in tall-building wind-resistant design. A series of wind tunnel experiments and numerical simulation have been carried out to determine aerodynamic forces and wind pressures acting on tall building models with various configurations: corner cut, setbacks, helical and so on. Dynamic wind-induced response analyses of these models have also been conducted. The results of these experiments have led to comprehensive understanding of the aerodynamic characteristics of tall buildings with various configurations.