• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.647-652
• /
• 2016

To reduce drag force at supersonic speeds, sharp leading edge is hugely efficient. It is, however, incompatible with leading edge shape to have fine aerodynamic characteristics at subsonic and transonic speeds. It is critical to reduce drag force for enhanced cruise performance and higher efficiency. An air superiority fighter, however, required to have high maneuverability for survivability, and sharp leading edge is not proper. Consequently, variable leading edge is demanded to reduce drag force significantly at supersonic speeds for cruise performance. Leading edge altering system is constructed with rigid material to improve possibility of realization, and minimized movement of its components in altering for reduce effects on flight. It is compared with bi-convex airfoil and NACA 65-006 airfoil, which have comparable maximum thickness. At Mach number 1.7 and zero angle of attack, supersonic mode of designed airfoil indicates approximately 17% higher drag coefficient than the bi-convex airfoil indicates, it is, however, 23% lower than the NACA 65-006 indicates. Also, subsonic mode of the designed airfoil shows fine aerodynamic characteristics in comparison with NACA 65-006 airfoil in subsonic and transonic speed range. In this regard, design of the airfoil achieved the object of this study satisfactorily.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.70-82
• /
• 1999

During the aircraft conceptual design stage, rapid aerodynamic analyses over various configurations are required. Hence, empirical and analytical methods play important roles in predicting the aero-dynamic characteristics. In this study, total drag estimation method based on empirical and analytical approaches is developed. By comparing with the results of the wind tunnel experiment and existing prediction methods, it is demonstrated that the developed method is accurate and useful in predicting total drag for the whole Mach number range.

• Journal of Mechanical Science and Technology
• /
• 제14권8호
• /
• pp.867-878
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using three-dimensional Euler equations. Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. Numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, length and the existence of a tunnel on the crossing event. Unsteady aerodynamic loads-a side force and a drag force-acting on the train during the crossing are numerically predicted and analyzed. The side force mainly depends on the nose-shape, and the drag force depends on tunnel existence. Also. a push-pull (i.e.impluse force) force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary to evaluate the stability of high speed multi-car trains. The results also indicate the effectiveness of the present numerical method for simulating the unsteady flow fields induced by bodies in relative motion.

• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.139-145
• /
• 2012

천음속 영역에 적합하도록 개발된 수정 Sonic Arc 익형의 저속 공력특성에 대해 조사하였다. 이 익형은 Schwendenman이 제안한 sonic arc 형상 함수와 NACA0012 형상 data 그리고 상용 프로그램 Maple을 이용하여 설계하였다. 수정 Sonic Arc 익형의 저속공력 특성을 조사하기 위해 마하수 0.3 이하에서 수치해석을 수행하고 그 결과를 NACA0012 익형의 저속 공력성능과 비교분석하였다. 각 마하수에서 수정 sonic arc 익형의 항력은 NACA0012의 항력보다 약 1.5% 정도 작게 나타났으며, 양력 비교에서도 수정 Sonic Arc 익형의 양력은 NACA0012의 양력보다 약 2% 정도 일정하게 작게 나타났다. 또한 각 마하수에서 수정 Sonic Arc 익형의 모멘트 계수는 NACA0012의 값보다 약 1.4% 정도 작게 나타났다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.8-18
• /
• 2015

A numerical simulation for a nonslender BWB UCAV configuration with a rounded leading edge and span of 1.0 m was performed to analyze its aerodynamic characteristics. Numerical results were compared with experimental data obtained at a free stream velocity of 50 m/s and at angles of attack from -4 to $26^{\circ}$. The Reynolds number, based on the mean chord length, is $1.25{\times}106$. 3D multi-block hexahedral grids are used to guarantee good grid quality and to efficiently resolve the boundary layer. Menter's shear stress transport model and two transition models (${\gamma}-Re_{\theta}$ model and ${\gamma}$ model) were used to assess the effect of the laminar/turbulent transition on the flow characteristics. Aerodynamic coefficients, such as drag, lift, and the pitching moment, were compared with experimental data. Drag and lift coefficients of the UCAV were predicted well while the pitching moment coefficient was underpredicted at high angles of attack and influenced strongly by the selected turbulent models. After assessing the pressure distribution, skin friction lines and velocity field around UCAV configuration, it was found that the transition effect should be considered in the prediction of aerodynamic characteristics of vortical flow fields.

• Wind and Structures
• /
• 제25권3호
• /
• pp.215-232
• /
• 2017

Wind tunnel tests and numerical aerodynamic analyses were conducted for an integrated catwalk structure under strong winds. From the wind tunnel tests, it is found that the aerodynamic coefficients were different from those of the typical type. The drag coefficient was larger than typical and was sensitive to number of vertical meshes installed rather than the solidity ratio. Comparing with typical catwalk, the integrated one showed larger deformation under strong wind, and the large torsional deformation are mainly caused by drag force. It did not show aerodynamic divergence even the torsional deformation reaching $20^{\circ}$. The reason could be that the stiffness is smaller and thus the catwalk is able to deform to the shape compactable with higher loading. Considering safety for construction, storm rope system is introduced to the catwalk to reduce the deformation to acceptable level.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.17-26
• /
• 2002

훈련기의 1/12 축소 날개반쪽 모델 및 1/16 축소 완제기 전체모델에 날개끝 불어내기 방향이 다른 3가지 슬롯(전방 35도 방향, 날개방향, 후방35도 방향)을 장착하고, 또한 3가지 불어내기 운동량 계수 (0. 004, 0.009, 0.017)의 변화를 받음각의 증가에 따라 양력과 항력의 공력특성의 변화를 비교하였고, 반쪽모델에서는 전체모델과 같은 방법으로 날개 윗면의 압력을 측정하여 기본형과 비교하였다. 실험결과 날개방향으로 불어내기를 하였을 경우와 불어내기 운동량 계수가 0.017인 경우가 가장 큰 항력감소와 양항비의 증가를 나타냈으며, 받음각 8도에서 가장 큰 항력감소율과 양항비 증가율이 있었음을 알 수 있었다.

• 한국항공우주학회지
• /
• 제35권7호
• /
• pp.581-585
• /
• 2007

TSD 이론으로 구해진 sonic arc 익형의 형상을 새로운 익형 형상으로 수정하고 천음속 유동에서의 공력 성능을 조사하였다. Euler solver를 이용하여 수정 sonic arc 익형에 대한 수치계산을 수행하고 그 결과를 NACA0012 익형의 공력 성능과 초임계 익형의 공력 성능 그리고 NACA64A210 익형의 공력성능과 비교하였다. 천음속 유동의 같은 자유 유동 마하수에서 수정 sonic arc 익형의 압력 항력은 NACA0012 익형의 압력 항력보다 더 작게 나타났으며 수정 sonic arc 익형의 양항비는 NACA0012 익형의 양항비보다 훨씬 크게 나타났다. 천음속 유동에서의 항력 발산 마하수 비교에서는 수정 sonic arc 익형의 항력 발산 마하수가 NACA64A210 익형의 항력 발산 마하수보다는 크게 나타났지만 초임계 익형의 항력 발산 마하수 보다는 작게 나타났다.

• 한국철도학회논문집
• /
• 제13권1호
• /
• pp.44-50
• /
• 2010

본 연구에서는 튜브-열차 시스템의 기본적인 유동장의 특성을 파악하고, 튜브열차의 공기저항을 계산할 수 있는 보다 효율적인 수치 해법을 제시하고 계산 결과에 대한 타당성을 논하였다. 최소한의 계산 영역 내에선 정상상태의 해를 찾기 위하여 비정상 해석의 결과를 기준으로 하여 경계조건의 부여 방법을 변화시킨 정상 해석의 결과를 비교한 결과, 열차속도가 300 km/h일 경우에는 공기저항의 값이 정상해석 결과와 비정상해석 결과가 잘 일치하였으며, 동일 속도 대역에서의 고속열차 현장시험 결과와 비교한 결과 열차/터널 단면적비에 따라 공기저항의 비가 동일한 추세를 나타나는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.137-145
• /
• 2011

This paper suggests possible rear body shape modifications of a passenger car for the improvement of aerodynamic performance, based on the CFD analysis results. YF SONATA, a passenger car of Hyundai Motors Company, plays a major role as the baseline car in this research. Representatively, three parts(trunk rear edge, side rear edge and rear undercover) are modified in a small range in order for the total outer shapes not to be changed enough so that the modified car is not considered different, compared with the baseline. Specifically, using computational fluid dynamics, aerodynamic drag reduction is accomplished maximally about 11% in this research. Finally, it is proved that although the range of changes of the rear body shapes of a passenger car is very strictly confined, by changing a small range of rear body shapes alone the enhancement of aerodynamic performance of a passenger car can be significantly accomplished.