• 한국환경보건학회지
• /
• 제34권2호
• /
• pp.131-136
• /
• 2008

The variation of the particle size distribution and density as well as the chemical composition of aerosols is important to evaluate the particles. This study measured and analyzed airborne particles using a scanning mobility particle sizer (SMPS) system and an aerodynamic particle sizer (APS) at the University of Seoul during every season. The highest particle number concentration of airborne particles less than $0.9\;{\mu}m$, occurred in winter, while the highest particle number concentration of airborne particles more than $0.9\;{\mu}m$, occurred in spring. Mass concentration appeared highest at spring. Also, when we compared $\beta$-ray's mass concentration with calculated mass concentration by using the SMPS-APS system during each season, density of the winter is $1.92\;g/cm^3$, spring density is $1.64\;g/cm^3$, fall density is $1.57\;g/cm^3$. We found out that PM10 density was differ every season. However, while the calculated density is whole density for PM10 the density of each diameter was different. In this study the density estimation equation of the QCM cascade impactor measured mass concentration of each diameter.

• 한국유체기계학회 논문집
• /
• 제19권5호
• /
• pp.5-11
• /
• 2016

The purpose of this study is to design the transonic centrifugal compressor impeller with splitter blades and analyze the flow fields with respect to various splitter blades. Seven impellers with different splitter chord length or pitchwise location were tested by using CFD method. To investigate aerodynamic performance, Mach number distribution and entropy distribution were confirmed. As a result, it is found that the size of transonic region and shock wave location are related to the splitter chord length and pitchwise location. Also the impeller with long chord length of splitter shows higher total pressure ratio but lower efficiency than those of the impeller with short chord length of splitter. In terms of pitchwise location, the impeller with the splitter located in mid-pitch of main blades shows the best performance with respect to pressure ratio and efficiency.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.297-301
• /
• 2008

The flight vehicles have cavities such as wheel wells and bomb bays. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves. Resonance phenomena can damage the structures around the cavity and negatively affect aerodynamic performance and stability. The flow field is observed to oscillate in the "shear layer mode" with low aspect ratio. In the present study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's $\kappa$-$\omega$ turbulence model. The flow field is observed to oscillate in the shear layer mode" with large aspect ratio. Based on the SPL(Sound Pressure Level) analysis of the pressure variation at the cavity trailing edge, the dominant frequency was analyzed and compared with the results of Rossiter's formul. The aero-acoustic wave analyzed with CPD(Correlation of Pressure Distribution).

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.297-301
• /
• 2008

The flight vehicles have cavities such as wheel wells and bomb bays. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves. Resonance phenomena can damage the structures around the cavity and negatively affect aerodynamic performance and stability. The flow field is observed to oscillate in the "shear layer mode" with low aspect ratio. In the present study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's ${\kappa}-{\varepsilon}$ turbulence model. The flow field is observed to oscillate in the "shear layer mode" with large aspect ratio. Based on the SPL(Sound Pressure Level) analysis of the pressure variation at the cavity trailing edge, the dominant frequency was analyzed and compared with the results of Rossiter's formul. The aero-acoustic wave analyzed with CPD(Correlation of Pressure Distribution).

• 대한후두음성언어의학회지
• /
• 제15권1호
• /
• pp.47-51
• /
• 2004

Normally, as a result of increased laryngeal growth, the male voice drops about one octave in pitch level during adolescence. Failure of the voice to drop in pitch is consider to be a clinically significant voice disorder - 'mutational dysphonia'. The aim of this article is to evaluate the changes brought about by voice therapy, using the analysis of the EGG measure from Lx Speech Studio program(Laryngograph Ltd, UK) as well as acoustic, and aerodynamic studies in 18-year-old mutational dysphonia patient. The results from the Lx Speech Studio program demonstrated bimodal distribution of DFx(Hz), DQx(%), QxFx and diplophonic characteristic. After voice therapy combined with manual compression method, the distribution of DFx, DQx, QxFx was changed uniform with a dramatic reduction of higher pitch level. In addition, this finding suggests the EGG measure helps to choice treatment options, monitor the efficacy of therapy, and estimate the prognosis of diseases.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.571-580
• /
• 2015

In this paper, a computational study was conducted in order to investigate the rotor blade sweep effect on the aerodynamics of a small axial supersonic impulse turbine stage. For this purpose, three-dimensional unsteady RANS simulations have been performed with three different rotor blade sweep angles ($-15^{\circ}$, $0^{\circ}$, $+15^{\circ}$) and the results were compared with each other. Both NTG (No tip gap) and WTG (With tip gap) models were applied to examine the effect on tip leakage flow. As a result of the simulation, the positive sweep model ($+15^{\circ}$) showed better performance in relative flow angle, Mach number distribution, entropy rise, and tip leakage mass flow rate compared with no sweep model. With the blade static pressure distribution result, the positive sweep model showed that hub and tip loading was increased and midspan loading was reduced compared with no sweep model while the negative sweep model ($-15^{\circ}$) showed the opposite result. The positive sweep model also showed a good aerodynamic performance around the hub region compared with other models. Overall, the positive sweep angle enhanced the turbine efficiency.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3068-3073
• /
• 2007

Aerodynamic forces and moments have been used to control rocket propelled vehicles. If control is required at very low speed, Those systems only provide a limited capability because aerodynamic control force is proportional to the air density and low dynamic pressure. But thrust vector control(TVC) can overcome the disadvantages. TVC is the method which generates the side force and roll moment by controlling exhausted gas directly in a rocket nozzle. TVC is classified by mechanical and fluid dynamic methods. Mechanical methods can change the flow direction by several objects installed in a rocket nozzle exhaust such as tapered ramp tabs and jet vane. Fluid dynamic methods control the flight direction with the injection of secondary gaseous flows into the rocket nozzle. The tapered ramp tabs of mechanical methods are used in this paper. They installed at the rear in the rocket nozzle could be freely moved along axial and radial direction on the mounting ring to provide the mass flow rate which is injected from the rocket nozzle. In this paper, the conceptual design and the performance study on the tapered ramp tabs of the thurst vector control has been carried out using the supersonic cold flow system and shadow graph. Numerical simulation was also performed to study flow characteristics and interactions between ramp tabs. This paper provides to analyze the location of normal shock wave and distribution of surface pressure on the region enclosed by the tapered ramp tabs.

• 한국항공우주학회지
• /
• 제44권10호
• /
• pp.843-852
• /
• 2016

실제 씨앗의 3차원 형상과 운동요소에 기반하여 단풍나무(Acer palmatum 종) 씨앗의 자동회전 비행을 수치적으로 해석하였다. 운동요소의 표준 값은 낙하속도는 1.26 m/s, 회전속도는 133.6 rad/s (1,276 rpm), 코닝 각은 $19.4^{\circ}$, 피치 각은 $-1.5^{\circ}$이다. 씨앗 날개의 스팬 안쪽에 위치한 컴팩트한 앞전 와류가 씨앗 날개 바람 반대면에 커다란 부압을 발생하게 하였다. 부압의 피크는 안쪽 스팬 단면 앞전 부근에 발생하였다. 본 연구에서 얻어진 현저한 앞전 와류로 특징되는 흐름 형태와 공기력 계수의 값은 동적 상사를 갖도록 한 로봇 씨앗에 대하여 실험적으로 측정한 자료와 잘 일치하였다. 바람 반대 영역에 발달한 나선형 와류는 씨앗 끝을 향하여 전진하고 씨앗 끝 부분에서 이곳을 지나는 흐름과 합쳐지는데, 이와 같은 흐름이 자동회전하는 단풍나무 씨앗의 안정되고 부착된 LEV를 유지하게 하는 메카니즘으로 여겨진다.

• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.955-965
• /
• 2010

초소형 무인기 추진용 MH-75 프로펠러는 자유와 설계기법을 이용하여 설계변수인 허브팁 비, 비틀림각 분포, 최대 캠버의 위치와 크기 그리고 시위 길이를 변화시키며 설계 요구조건을 만족하도록 공력설계 되었다. MH-75 프로펠러는 주파수영역 패널법을 이용하여 설계요구조건을 만족시키고, 다양한 초소형 무인기에 적용이 가능하도록 정지추력 특성과 비행속도 및 회전수 변화에 따른 성능 특성을 예측하였다. 그리고 MH-75 프로펠러의 공력해석 결과를 검증하기 위해 프로펠러의 추력특성에 대한 풍동시험을 수행하였다. MH-75 프로펠러의 추력 성능은 설계요구조건을 만족하였으며, 저레이놀즈 수 영향을 고려하기 위한 2차원 익형 해석용 XFOIL 프로그램에 비해 3차원 효과를 고려하는 주파수영역 패널법을 이용하는 것이 비교적 풍동시험 결과와의 오차가 적음을 확인하였다.

• 한국항공우주학회지
• /
• 제35권10호
• /
• pp.868-874
• /
• 2007

정지비행시의 헬리콥터 로터 모형의 블레이드의 피치각 변화가 소음방사에 미치는 영향을 수치해석을 통해 파악하였다. 공력 자료는 비정상 패널법과 경험후류 방법을 이용하여 구하였으며, $0^{\circ}$에서 $9^{\circ}$까지 등간격으로 $1.5^{\circ}$ 씩 피치각을 증가시키면서 블레이드 표면상의 공력 하중 분포를 얻어내었다. 수치해석을 통해 얻어낸 두께 소음은 피치각에 무관한 결과를 보였으나, 하중소음은 피치각이 $1.5^{\circ}$ 씩 증가할 때 마다 대략 3~4dBA정도로 소음의 세기가 증가하는 경향을 보였으며, 이정도의 증가분은 소음이 더 커졌음을 감지할 수 있는 충분한 크기라 할 수 있다. 또한 하중소음의 방향성 결과로부터 블레이드의 윗면 보다는 아랫면에서의 소음의 세기가 더 크게 나옴을 알 수 있었다.