• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.233-234
• /
• 2003

Fly ash enters axial compressor when a turbomachinery is operated in an adverse environment. We have numerically investigated erosion of the blade and shroud in the turbulent compressor passage flow under the influence of gas-particle two-phase interaction. There have appeared quasi-three dimensional calculations on this subject but not the complete three-dimensional gas-particle interaction as done in the present work. Lagrangian particle tracing technique is used on the base of parallel processing for efficient calculation. Accuracy of the present code is tested using the benchmark lPL nozzle. In the DFVLR compressor blades, we have shown that a large number of particles passing through the tip clearance make impact on the blade tip and on the shroud. Higher degree of erosion is resulted by the heavier particles due to the centrifugal force.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.203-204
• /
• 2003

Fly ash enters axial compressor when a turbomachinery is operated in an adverse environment. We have numerically investigated erosion of the blade and shroud in the turbulent compressor passage flow under the influence of gas-particle two-phase interaction. There have appeared quasi-three dimensional calculations on this subject but not the complete three-dimensional gas-particle interaction as done in the present work. Lagrangian particle tracing technique is used on the base of parallel processing for efficient calculation. Accuracy of the present code is tested using the benchmark JPL nozzle. In the DFVLR compressor blades, we have shown that a large number of particles passing through the tip clearance make impact on the blade tip and on the shroud. Higher degree of erosion is resulted by the heavier particles due to the centrifugal force.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.491-496
• /
• 2000

The physics of the flow field surrounding an engine nacelle afterbody is very complex. A high pressure jet from the nozzle interacts with the external flow and causes upstream influence on the afterbody surface field. At certain conditions, the nozzle boundary layer can separate, either by shock wave interaction or by adverse pressure gradient effect, resulting in a severe drag penalty. Furthermore, a finite afterbody base implies a recirculating flow region. A flow modeling method has been developed to analyze the flow in the annular base(rear-facing surface) of a circular engine nacelle flying at subsonic speed but with a supersonic exhause jet. Real values of exhaust gas properties and temperature are included.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.2
• /
• pp.155-163
• /
• 2016

The purpose of the review article is to investigate the influence of periodontal diseases on preterm birth(PTB) and low birth weight(LBW). PTB and LBW are the main risk factors of infant mortality and a major public health problem. PTB is defined as delivery at less than 37 weeks and LBW is less than 2,500 grams. Over Approximately 60 percent of perinatal mortality results from PTB or LBW. Although the causes of PTB and LBW are not fully understood, infection is the leading cause of PTB and LBW. Periodontal diseases are serious disease burdens because they are caused by bacterial endotoxin, inflammatory reaction, and cytokine. The periodontal diseases are the predisposing factors of cerebrovascular and cardiovascular diseases including atherosclerosis. Over the past 15 years, previous studies revealed that periodontitis had adverse outcomes including PTB and LBW in pregnancy.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.214-221
• /
• 2003

Tension mask assembly is positioned right behind the glass-made front panels of CRT type display devices. The frame-supported thin metal sheet contains numerous slits, through which electron beams are focused to enhance definition. Pretension is imposed on the masks, especially for enlarged flat screens, in order to avoid vibration due to acoustic or mechanical impact. High temperature assembly process subsequent to pretensioning, however, degenerates the creep resistance of common mask materials, and if tensile stress is high enough, tension on the mask may be loosened substantially due to creep deformation. In this study, the assembly is modeled as a combined structure of beams and wire array, and a numerical simulation is attempted for pretensioning followed by high temperature process. According to a model study, small amount of creep strain is likely to be generated, but its adverse influence is not negligible. Some structural modification measures to reduce the creep-induced tension loosening are proposed and evaluated. Also, optimal configuration of frame structure is sought for, which maintains high tension of masks and minimizes the possible creep of frame simultaneously.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.1
• /
• pp.19-25
• /
• 2012

The air traffic situation variables were emphasized in this research to review the awareness level of job performance of military air traffic controllers in application of air traffic situation variables such as detection of aircraft identification, type of aircraft, position ,speed, altitude, determination of separation between departing and arriving in-trail aircraft, physical airport conditions, adverse weather conditions, NAVAID outage and ATC facilities' operational status. In this respect, This study was conducted under the auspice of ATC facility operating agencies and devoting air force air traffic controller's participation by answering the questionnaires from nine radar approach control facilities and other air traffic control towers.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.470-475
• /
• 1999

Several enzyme were applied to Laubholz Bleached Kraft Pulp(LBKP) to evaluate the influence on beatability which was measured in Schopper Riegler value, and the results were compared with untreated pulp. Among the types of enzyme, cellulase was found to be the most effective. Addition of cellulase increased the beatability by 28% at optimum condition. Strength properties such as tensile strength and folding endurance also increased with enzymatic treatment by 12% and 46%, respectively. However, excessive dosage of cellulase had an adverse effect on strength properties in spite of the high beatability. Fibrillization by cellulase and destruction of fiber by excessive reaction was observed by Scanning Electron Microscopy(SEM).

• Journal of Korea Foundry Society
• /
• v.6 no.2
• /
• pp.93-103
• /
• 1986

It is very important to obtain wear resistant ductile iron by adding more economical alloying elements. In this study, 10 heat of Mg-treated ductile iron were made according to Sb content (0-0.1% Sb). Each melt was tasted to 30 ${\o}test$ bars in $CO_2$ mold under the same condition and inspected wear characteristics, mechanical properties and microstructures. The results obtained from this study are as follows; 1. It is confirmed that Sb should be a simple and useful additive for improving wear resistance in ductile iron. 2. Hardness of ferrite and pearlite is improved with increasing Sb amount in ductile iron. 3. For ductile iron, the recommended ladle addition of Sb amount is to 0.02-0.03%. 4. Sb has adverse influence on spheroidizing of graphite if the amount is over 0.04%.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.88-95
• /
• 2001

Stator core loss has significant adverse effects when an induction motor is controlled by the conventional vector control method. Therefore, taking core toss into account should make it possible to control the torque very precisely. This paper proposes a speed sensorless vector control method for an induction motor at optimum efficiency and high response taking core loss account. The proposed vector control system consists of a speed adaptive rotor flux observer which takes core loss into account and employs a direct vector control which compensates for the influence of core loss. Also, in this paper, a vector controlled induction motor with a deadbeat rotor flux controller is developed. The method ensures optimum efficiency in the steady state without degradation of the dynamic response. The validity of the proposed technique is confirmed by simulation results for induction motor drive system.

• BMB Reports
• /
• v.51 no.4
• /
• pp.167-173
• /
• 2018

Experimental results obtained from research using only one sex are sometimes extrapolated to both sexes without thorough justification. However, this might cause enormous economic loss and unintended fatalities. Between years 1997 and 2000, the US Food and Drug Administration suspended ten prescription drugs producing severe adverse effects on the market. Eight of the ten drugs caused greater health risks in women. Serious male biases in basic, preclinical, and clinical research were the main reason for the problem. This mini-review will describe why and how funding organizations such as the European Commission, the Canadian Institutes of Health Research, and the US National Institutes of Health have tried to influence researchers to integrate sex/gender not only in clinical research, but also in basic and preclinical research. Editorial policies of prominent journals for sex-specific reporting will also be introduced, and some considerations in integrating sex as a biological variable will be pointed out. To produce precise and reproducible results applicable for both men and women, sex should be considered as an important biological variable from basic and preclinical research.