• 한국항해항만학회지
• /
• 제38권5호
• /
• pp.451-456
• /
• 2014

본 연구에서는 유입수의 변동이 심하고 전문가가 부재한 환경인 선박에서 발생하는 오수의 효과적인 처리를 위하여 RCM공법을 선박오수처리장치에 적용하는 실험실 규모의 실험을 수행하였다. 질소 인의 고도처리 효율과 선박이라는 특수환경과의 접목성을 검토한 결과 RCM공정에 유효미생물을 주입하는 방법은 선박환경에 적합한 것으로 평가되었다. 또한 RCM공정은 활성슬러지 공정에서 배출되는 슬러지는 배출시키지 않고 슬러지액화분해조(SDC)에서 재분해하여 순환함으로써, 최근 해양투기가 금지됨으로 인해 문제가 되고 있는 슬러지의 발생량을 최소한으로 하여 친환경적인 수처리가 가능하다. 복합미생물제제 주입 후 미생물 관찰결과 고도처리에 유리한 미생물종의 출현을 확인하였으며 이들의 상호기작으로 질소 인의 처리에 도움을 주어 처리효율이 높은것이라 판단된다. 유기물 제거효율 실험결과 $BOD_5$, CODcr T-N, T-P의 처리효율이 각각 96, 97, 78, 81.68 %로 나타나 Membrane이나 Filter없이도 강화되어가는 해양오염기준을 충족시킬 수 있는 공정으로 판단된다.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.27-34
• /
• 2006

This study was conducted to evaluate the performance of a membrane bioreactor filled with high concentration of powdered activated carbon (HCPAC-MBR) to reduce DBPs at the drinking water treatment. The pilot system was installed after the rapid sand filtration process whose plant was the conventional treatment process. The removal efficiencies of DBPs were measured during pilot operation period of 2 years. HAA and THM removal rates could be maintained around 80~90% without any troubles and then tremendous reduction of HAA and THM reactivity were observed more than 52%. The average removal rate of HAA formation potential (FP) and THM formation potential (FP) were 70.5% and 67.6% respectively. It is clear that the PAC membrane bioreactor is highly applicable for advanced water treatment to control DBPs.

• 상하수도학회지
• /
• 제19권3호
• /
• pp.323-329
• /
• 2005

Advanced processes such as ozonation or activated carbon filtration (ACF) in water treatment plants have been used in Korea since 1994. At present, seventeen drinking water treatment plants are currently operating. This survey compares the treatment performance of advanced processes in eight plants which have comparable water quality data. The three parameters (DOC, $UV_{254}$, and $KMnO_4$ consumption) of water quality were selected as an indicator of treatment efficiency. The treatment efficiency of ozonation and ACF processes was found to vary with large deviations in each plant. Treatment efficiency of DOC, $UV_{254}$, and $KMnO_4$ consumption by post ozonation ranged from 3 to 11%, 6 to 33%, and 12 to 28% respectively. On the other hand, for ACF, treatment efficiency of DOC, $UV_{254}$, and $KMnO_4$ consumption ranged from 7 to 38%, 8 to 48%, and 16 to 66% respectively. These large deviations indicate the advanced processes of water treatment plants to be further optimized.

• 한국환경과학회지
• /
• 제17권4호
• /
• pp.405-412
• /
• 2008

Statistical analysis technique was applied to operating parameters and removal efficiency data sets obtained from advanced wastewater treatment plant during 1 year. Through factor analysis three factors derived varimax rotation were selected each plant. Three components explained 96%, 87% of the total variance of the process, respectively. The components on $A_2O$ Plant were identified in the following order : 1) Shortening the SRT during high-flow period, 2) Keeping biomass high on winter 3) factor was related to DO. On DNR plant, we defined them as follows: factor 1, Prolonged the SRT during high-flow period; factor 2 was related to sludge return; factor 3, Influent BOD during low-DO period. This technique was believed to assist operators in identifying priorities to improve operation efficiency.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.406-415
• /
• 2018

Here, as-synthesized $Fe_3O_4$ nanoparticles were incorporated into the zeolitic imidazolate framework (ZIF-8) lattice to activate sodium percarbonate (SPC) for degradation of methylene blue (MB). The reaction rate constant of $Fe_3O_4@ZIF-8/SPC$ process ($0.0632min^{-1}$) at acidic conditions (pH = 3) was more than six times that of the $Fe_3O_4/SPC$ system ($0.009min^{-1}$). Decreasing the solute concentration, along with increasing SPC concentration and $Fe_3O_4@ZIF-8$ nanocomposite (NC) dosage, favored the catalytic degradation of MB. The $Fe_3O_4@ZIF-8$ NC after fifteen consecutive treatment processes showed the excellent stability with a negligible drop in the efficiency of the system (<10%). The reaction pathway was obtained via GC-MS analysis.

• 한국물환경학회지
• /
• 제24권5호
• /
• pp.618-625
• /
• 2008

Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to evaluate the effluent BOD, SS, T-N, and T-P concentrations as process capable and stable parameters for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent BOD, SS, T-N, and T-P concentrations were 4.56, 5.20, 9.30, and 1.75 mg/L at the conventional mode and 3.95, 3.17, 7.65, and 1.18 mg/L at the modified mode. The modified mode (BOD: 3.69, SS: 3.19, T-N: 1.27, and T-P: 0.69) increased the process capability more than the conventional mode (BOD: 1.80, SS: 1.05, T-N: 2.17, and T-P: 0.15) in this study. If process capability over 1.0, this process is capable and stable to treat wastewater. Therefore, newly developed APID process with modified intermittent aeration mode can be one of the useful processes for stable organic matter and nutrients removal.

• 한국표면공학회지
• /
• 제35권6호
• /
• pp.401-407
• /
• 2002

Most of organic compounds discharged from industrial wastewater are treated by chemical oxidation, adsorption and biodegradable process. This process has been demanded a new advanced environmental wastewater treatment process. From this point of view, an electrochemical oxidation process using electrocatalysts has been developed for the destruction of organic compounds. Through this study, a ruthenium oxide/iridium oxide supported on titanium expanded metal was fabricated by thermal decomposition method and its performance was excellent during this experiment.

• 환경정보
• /
• 제24권7_8호
• /
• pp.44-54
• /
• 2002

• 상하수도학회지
• /
• 제28권5호
• /
• pp.541-548
• /
• 2014

The pickling brine generated from the salting process of kimchi production is difficult to treat biologically due to very high content of salt. When pickling brine is treated and discharged, it cannot satisfy the criteria for effluent water quality in clean areas, while resources such as the salt to be recycled and the industrial water are wasted. However, sterilization by ozone, UV and photocatalyst is expensive installation costs and operating costs when considering the small kimchi manufacturers. Therefore there is a need to develop economical process. The study was conducted on the sterilization efficiency of the pickling brine using electrochemical processing. The electrochemical treatment of organic matters has advantages over conventional methods such as active carbon absorption process, chemical oxidation, and biological treatment because the response speed is faster and it does not require expensive, harmful oxidizing agents. This study were performed to examine the possibility of electrochemical treatment for the efficient processing of pickling brine and evaluated the performance of residual chlorine for the microbial sterilization.

• 공업화학
• /
• 제16권2호
• /
• pp.217-225
• /
• 2005

H사의 유로변경식 고도하수처리 공법의 제어 변수가 DO와 수온 등으로 한정되어 있어 효율성의 만족도를 충족시켜주지 못하는 현재의 상황을 개선하고자 세 가지 개선방향을 설정하여 Simulation을 통한 Operation Data의 분석 및 장치구성과 실험을 통한 최적제어 Logic을 연구하여 이를 다시 S하수처리장에 설치 적용한 결과이다. 본 실험을 통해서 수온과 유량에 근간한 Operation Mode 변경의 최적화와 이를 통한 동력비 절감을 이루었고 암모니아성 질소의 농도에 따른 Operation Mode의 변경에서 일반 Normal Mode와 병행하여 Save Mode를 새로 적용하여 동력비 절감을 이루었다. 또한 DO 값을 송풍량과 수중폭기기의 교반속도에 의해 비례제어하고 유출수의 암모니아 농도에 따라 DO 값을 제어하여 안정적인 질산화를 이루었다. 이러한 결과는 공정효율의 극대화와 운영 및 유지관리비의 절감을 이루었다.