• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.82-86
• /
• 2016

This paper proposes a method for the immobilization of motorbike brakes in conjunction with near-field communication (NFC) technology in order to meet the increasing demand for security and convenience of motorbike drivers. We thought about the concept of wireless key, NFC security devices and automatic solenoid valve for setting the lock and unlock module. This paper propose the design and development of an innovative anti-theft alarm system for motorcycles using NFC smart devices based on RFID system, the basis of IoT and AES(advanced encryption standard) encryption Algorithm. The design concept is based on NFC communication strategy between the vehicle and owner. To do this concept, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.175-181
• /
• 2014

A four-link mechanism consisting of torsion bars is used for opening the trunk lid in most midsize sedans. When the weight of the lid is in equilibrium with the spring force exerted by torsion bars, the lid stops opening at a pop-up height. However, the actual pop-up height has large deviations from the specified height even with the same parts in the same car model, which leads to quality issues. Automotive manufacturers have experienced this deviation problem despite much effort to resolve it. In this research, we developed a multi-body dynamics model for the analysis of pop-up deviation of a trunk lid with torsion bars, which can simulate the actual pop-up motion of the trunk lid by considering kinematic constraints of the motion and friction forces in joints. We could also determine the most important factor that governs the pop-up height by sensitivity analysis of all parts. The developed system can be used for the analysis of other trunk lid systems to control the tolerance of parts.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.166-174
• /
• 2014

Fuel injection pressure has steadily increased in diesel engines for the purpose of improving fuel efficiency and cleaning exhaust gas, but it has now reached a point, where the cost for higher pressure does not warrant additional gains. Common rail systems on modern diesel engines have fuel pumps that are mechanically driven by crankshaft. The pumps actually house two pumping module inside: a low pressure pump component and a high pressure pump component. Part of the fuel compressed by the low pressure component returns to the tank in the process of maintaining the pressure in the common rail. Since the returning fuel represents pumping loss, fuel economy improves if the returned fuel can be eliminated by using a properly controled electrical fuel pump. As the first step in developing an electrical fuel pump the fuel supply system on a 6 liter diesel engine was modeled with AMESim to analyze the workload and the fuel feed rate of the injection pump, and the results served as basis for selecting a suitable servo motor and a reducer to drive the pump. A motor controller was built using a DSP and a program which controls the common rail pressure using a proportional control method based on the target fuel pressure information from the engine ECU. A test rig to evaluate performance of the fuel pump is implemented and used to show that the newly developed electrically driven fuel pump can satisfy the fuel flow demand of the engine under various operating conditions when the rotational speed of the pump is adequately controlled.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.359-364
• /
• 2013

In order to use a linear vibration motor for the actuator of a haptic interface, the motor must provide a higher reaction rate and longer service life than typical rotational motors with an eccentric mass. In this paper, we propose a linear vibration motor that is equipped with a voice-coil actuator and permanent-magnet springs. To concentrate the magnetic flux in the actuator, a Halbach-style magnetization pattern is used. Permanent-magnet springs replace mechanical springs to help increase the service life. We use the method of equivalent current sheets and the method of images to analyze and model the proposed vibration motor. These methods are validated using finite element analyses and experiments. A prototype motor is designed and fabricated. Tests with the prototype show the feasibility of the proposed linear vibration motor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.207-215
• /
• 2016

The demand for spatial data service technologies is increasing lately with the development of realistic 3D spatial information services and ICT (Information and Communication Technology). Research is being conducted on the real-time provision of spatial data services through a variety of mobile and Web-based contents. Big data or cloud computing can be presented as alternatives to the construction of spatial data for the effective use of large volumes of data. In this paper, the process of building HLM (Hyper Live Map) using multi-source data to acquire stereo CCTV and other various data is presented and a big data service architecture design is proposed for the use of flexible and scalable cloud computing to handle big data created by users through such media as social network services and black boxes. The provision of spatial data services in real time using big data and cloud computing will enable us to implement navigation systems, vehicle augmented reality, real-time 3D spatial information, and single picture based positioning above the single GPS level using low-cost image-based position recognition technology in the future. Furthermore, Big Data and Cloud Computing are also used for data collection and provision in U-City and Smart-City environment as well, and the big data service architecture will provide users with information in real time.

• International Journal of Automotive Technology
• /
• v.3 no.1
• /
• pp.33-40
• /
• 2002

Increasingly stringent emission regulations of EU and CARB (California Air resource Board) require mandatory OBD (On Board Diagnostics) far the catalytic converters of a vehicle. It demands that MIL(Malfunction Indication Light) should be tuned on to inform the driver of catalytic converter failures. Currently dual oxygen sensor method Is widely used for the converter OBD. However, since it works only alter converter light-off, it has a serious limitation when applied to TLEV or more stringent emission regulations where more than 85% of total emission is coming out before converter light-off. In addition, a recent development in catalyst material. coating technology and additive catalysts leads to a much improved OSC (Oxygen Storage Capacity) after converter light-off, current methods are very difficult to determine levels of converter aging. Therefore, it is desired to develop an OSC detecting method before converter light-off to diagnose converter failures with higher reliability. In this study, OSCs of converters are measured by an absolute measuring method and a dynamic measuring method, and some of fundamental ideas are suggested about converter OBD before converter light-off. The converters are aged with two different aging methods; those are a furnace aging and an engine bench aging: to represent aging conditions in actual field applications. Dual oxygen sensor method at the lower temperature than light-off is also studied at a model gas bench with the converters. It is fecund that there is a certain point in temperature lower than light-off where difference due to aging level becomes maximum, thus a proper dynamic method to effectively monitor catalytic converters could be implemented fur the range lower than light-off temperatures. With this result, the aging level of converters is examined at an engine bench.

• Tribology and Lubricants
• /
• v.23 no.5
• /
• pp.201-206
• /
• 2007

The bent-axis type piston pump which is driven by the piston rod works on the way that the piston rod drives the cylinder block, so the taper angle of the piston rod and the swivel angle between the cylinder block and the shaft are very important design factors. If the above factors cannot satisfy the conditions of optimum design, the friction loss between the cylinder bore and the piston increases, and the pump can even fail to work under conditions of severe friction and wear. Since the piston reciprocates in the cylinder bore with high velocity, and at the same time it rotates on its own axis and revolves on the center of the cylinder block, the decrease of the volume efficiency generated on account of the leakage between the cylinder bore and the piston. Therefore, to prevent this case, the piston ring is designed at the end of the piston, and the friction characteristics between the piston ring and the cylinder bore are in need of research due to its great influence on the performance of piston pump. Thus, in this paper, the elastic hydraulic oil's lubrication analyses of the film thickness, the pressure distribution, and the friction force, and so on, have been performed, and the lubrication characteristics between the piston ring and the cylinder bore are explored by the results of the numerical analysis, and it is contributed to realize the higher efficiency and the more advanced performance of the bent-axis type piston pump.

• Biomolecules & Therapeutics
• /
• v.23 no.5
• /
• pp.449-457
• /
• 2015

The present study was aimed to investigate the effects of MB12662, a synthetic dunnione compound, on cisplatin-induced vomiting reflexes and intestinal, renal, immune system, and hematopoietic toxicities in ferrets and mice, respectively. Male ICR mice were orally administered MB12662 (5, 10, 25 or 50 mg/kg) for 10 days, during which intraperitoneally challenged with cisplatin (3.5 mg/kg) from day 4 to 7, and sacrificed on day 10 for the pathological examination. Male ferrets were orally administered MB12662 (25, 50 or 100 mg/kg) for 7 days, subcutaneously challenged with cisplatin (5 mg/kg), and monitored for vomiting reflexes and survival of the animals. Four-day injection of cisplatin (3.5 mg/kg) to mice caused body weight loss and degeneration and atrophy of intestinal villi, reducing villi/crypt ratio to a half level of control animals. Cisplatin also induced renal and hepatic toxicities, and depletion of splenocytes and bone marrow progenitor cells. The systemic toxicities including decreased villi/crypt ratio, immune system atrophy, splenocyte depletion, and decreased cellularity in bone marrow were improved by MB12662. Cisplatin (5 mg/kg) induced retching and emetic responses of ferrets, which were remarkably attenuated by MB12662 in a dose-dependent manner. All the ferrets pretreated with MB12662 survived the challenge of cisplatin, in comparison with 40% mortality in vehicle-treated animals, and blood parameters of nephrotoxicity and hepatotoxicity were markedly recovered. It is expected that MB12662 could be a candidate for the body protection against burden, including emesis, of chemotherapeutic agents.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.11-19
• /
• 2016

Recently, global companies are developing the automobile technologies, converged with state-of-the-art IT technologies for the commercialization of autonomous vehicles. These autonomous vehicles are required the accurate lane information to enhance its reliability by controlling the vehicles safely. Hence, the study planned to examine possibilities of applying UAV photogrammetry of high-resolution images, obtained from the low altitudes. The high-resolution DSM and the ortho-images were generated from the GSD 7cm-level digital images that were obtained and based on the generated data, when the positions information of the roads including the lanes were extracted. In fact, the RMSE of verifying the extracted data was shown to be about 15cm. Through the results from the study, it could be concluded that the low alititude UAV photogrammetry can be applied for generating and updating a high-accuracy map of road areas.

• Journal of Information Technology Services
• /
• v.12 no.2
• /
• pp.171-184
• /
• 2013

Frequently faced with dangerous situations, for evidentiary purpose in case of civil and criminal liability challenges, car drivers in Korea have been armed with so-called 'black boxes'; however, which are just video recorders in vehicles rather than real 'black boxes' that are equipped in the airplanes. In the United States, they are called EDRs(Event Data Recorders), more technically, which means that they record data of events happened while driving, such as velocity changes, airbags deployment, seatbelt wearing etc. just like in the airplanes. EDR technology is quickly becoming more advanced, more widely available, and less expensive; however, new concerns are emerging : the privacy of drivers. In U. S., vehicle manufacturers and insurance companies and the governmental agencies including the courts and legislatures are the main parties in terms of the EDR concerns. In order to determine the best way to regulate EDR, it is necessary to balance all the merits, such as safety, privacy, truth, justice and efficiency, to support a legal framework regulating the EDR concerns. This article, in light of the regulation of EDR and experience therof in the United States, examines EDR technology itself, particularly with respect to the automobile industry, describing its history, its current state, and trends that may change it in the future; and explains how the National Highway Transportation Safety Agency (NHTSA), legislatures, courts have approached EDR data. At the early stage of regulation on EDRs in Korea, examining U. S. legal framework and usages would help for successful establishment of legislation and regulation.