Browse > Article
http://dx.doi.org/10.9725/kstle.2007.23.5.201

A study on lubrication characteristics between piston ring and cylinder bore of bent-axis type piston pump for vehicle  

Jung, Jae-Youn (Division of Mechanical & Aerospace System Engineering and RCIT, Chonbuk National University)
Cho, Ihn-Sung (Division of Mechanical & Aerospace System Engineering, Chonbuk National University)
Song, Kyu-Keun (Division of Mechanical & Aerospace System Engineering, Chonbuk National University)
Baek, Il-Hyun (Department of Precision Mechanical Engineering, Chonbuk National University)
Oh, Seok-Hyung (Division of Mechanical Engineering, Kunsan National University)
Jung, Seok-Hoon (Department of Automobile, Byuksung College)
Jeong, Yong-Wook (TongMyung Mottrol co., ltd.)
Publication Information
Tribology and Lubricants / v.23, no.5, 2007 , pp. 201-206 More about this Journal
Abstract
The bent-axis type piston pump which is driven by the piston rod works on the way that the piston rod drives the cylinder block, so the taper angle of the piston rod and the swivel angle between the cylinder block and the shaft are very important design factors. If the above factors cannot satisfy the conditions of optimum design, the friction loss between the cylinder bore and the piston increases, and the pump can even fail to work under conditions of severe friction and wear. Since the piston reciprocates in the cylinder bore with high velocity, and at the same time it rotates on its own axis and revolves on the center of the cylinder block, the decrease of the volume efficiency generated on account of the leakage between the cylinder bore and the piston. Therefore, to prevent this case, the piston ring is designed at the end of the piston, and the friction characteristics between the piston ring and the cylinder bore are in need of research due to its great influence on the performance of piston pump. Thus, in this paper, the elastic hydraulic oil's lubrication analyses of the film thickness, the pressure distribution, and the friction force, and so on, have been performed, and the lubrication characteristics between the piston ring and the cylinder bore are explored by the results of the numerical analysis, and it is contributed to realize the higher efficiency and the more advanced performance of the bent-axis type piston pump.
Keywords
oil hydraulic piston pump; EHL; piston ring; friction force;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Mansour A. Karkoub, Osama E. Gad and Mahmoud G. Rabie, 'Predicting Axial Piston Pump Performance using Neural Networks, Mechanism and Machine Theory,' Vol. 34, Issue 8, pp. 1211-1226, 1999   DOI   ScienceOn
2 Eric W. Schneider and Daniel H. Blossfeld, 'Radiotracer Method for Measuring Real-time Piston-ring and Cylinder-bore Wear in Spark-ignition Engines,' Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 505, Issues 1-2, pp. 559-563, 1 June 2003   DOI   ScienceOn
3 P. Kaliafetis and Th. Costopoulos, 'Modelling and Simulation of an Axial Piston Variable Displacement Pump with Pressure Control, Mechanism and Machine Theory,' Vol. 30, Issue 4, pp. 599-612, 1995   DOI   ScienceOn
4 Dowson, D. and Higginson, G. R., 'Elasto-Hydrodynamic Lubrication,' Pergamon, 1966
5 R.M. Douglas, J.A. Steel and R.L. Reuben, 'A Study of the Tribological Behaviour of Piston Ring/cylinder Liner Interaction in Diesel Engines using Acoustic Emission,' Tribology International, Vol. 39, Issue 12, pp. 1634-1642, December 2006   DOI   ScienceOn
6 Paolo Casoli, Andrea Vacca, Germano Franzoni and Gian Luigi Berta, 'Modelling of Fluid Properties in Hydraulic Positive Displacement Machines, Simulation Modelling Practice and Theory,' Vol. 14, Issue 8, pp. 1059-1072, 2006   DOI   ScienceOn
7 John J. Truhan, Jun Qu and Peter J. Blau, 'The Effect of Lubricating Oil Condition on the Friction and Wear of Piston Ring and Cylinder Liner Materials in a Reciprocating Bench Test,' Wear, Vol. 259, Issues 7-12, pp. 1048-1055, July-August 2005   DOI
8 정재연, 조인성, 오석형, '냉동 공조용 로터리 콤프레서의 윤활특성'(제2보; 베인 선단부의 탄성 유체 윤활 특성 해석), 한국윤활학회지, 제13권, 제1호, pp. 62-69, 1997