• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.38-42
• /
• 2004

A pilot-scale experiment for the treatment of red tide in the enclosure was done in sea area of Shandong Province, P. R. China on Aug. 25, 2002. With the method of strong dielectric barrier discharge in microgap, $O_2$in air and $H_2O$ in seawater are ionized and dissociated into large numbers of OHㆍradicals, and then dissolved into a part of seawater to form OHㆍsolution of high concentration. With OH' concentration of 0.68mg/L, the kill efficiencies of 29 kinds of red tide organisms such as Chaetoceros lorenzianus and so on reached 99.89%, in which the kill efficiencies of bacterium and vibrio were 100%, and that of Gonyaulax cysts and Prei. Cysts were up to 100%. At the same time, the content of chlorophyll-a was decreased into the lowest limit of test. DO saturation of seawater was greatly increased to 100% because the residual OHㆍradical was decomposed into $H_2O$ and $O_2$after 20 minutes, Therefore the treatment of red tide using OHㆍradicals is a kind of advanced oxidation technology, which realizes zero pollution, zero emission and zero residual in the process of the production of OHㆍradicals and the treatment of red tide.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.315-323
• /
• 2021

In this study, we examined corrosion behaviors of two types of Pb alloys for a lead acid battery comparatively. One containing 6.6 wt% Sn, 36 mg/kg Bi, and 612.4 mg/kg Ca was prepared by twin-roll continuous casting. The other containing 5.2 wt% Sn, 30.5 mg/kg Ag, and 557 mg/kg Ca was made by twin-belt continuous casting. Potentiodynamic polarization tests were performed to evaluate corrosion resistance. Cyclic voltammetry was done to examine oxidation and reduction reactions occurring on the surface of each alloy in 4.8 M H₂SO₄ solution. Electrochemical test results implied that the Pb alloy prepared with the twin-belt casting method was less stable than that cast with the twin-roll method. Such results might be due to precipitations formed during the casting process. Rolling did not appear to affect the corrosion behavior of the twin-roll samples with Ag < 10 mg/kg, while it reduced the anodic reaction of Ag on the surface of the twin-belt sample with 30.5 mg/kg Ag.

• 폴리머
• /
• 제36권4호
• /
• pp.531-535
• /
• 2012

폴리아닐린(PANI) 나노섬유를 전도성 충전제로 사용하여 광경화형 전도성 투명필름을 제조하였다. 화학산화중합(chemical oxidation polymerization)으로 나노섬유 구조의 산화형 폴리아닐린(ES-PANI)을 합성하였다. ES-PANI는 디도핑을 통해 환원형 폴리아닐린(EB-PANI)으로 유도하였다. 이것을 전도성 충전제의 전구체로 사용하여 도데실벤젠설폰산(DBSA)이 포함되어 있는 광경화형 레진에 분산시키면 재도핑된 재산화형 폴리아닐린(rES-PANI)을 얻을 수 있었다. 이런 과정을 통해 나노섬유 형태가 유지되면서 높은 전도성과 분산안정성이 우수한 광경화형 전도성 레진용액을 제조할 수 있었다. 제조된 광경화형 전도성 레진용액은 상온에서 3달 정도 두어도 rES-PANI 충전제의 침전물이 생기지 않았다. 또한 이 용액을 폴리(메틸 메타크릴레이트)(PMMA) 기재 위에 스핀코팅 후 광경화하여 약 $5{\mu}m$ 두께의 전도성 투명필름을 제조하였다. rES-PANI 나노섬유 농도가 1.4 wt%일 때 표면저항 $6.5{\times}10^8{\Omega}/sq$, 550 nm 파장에서 91.1%의 투과도를 보였다. ES-PANI의 디도핑-재도핑(dedoping-redoping) 과정을 통해 광경화형 전도성 레진용액에 분산된 PANI는 농도에 따라 필름표면저항과 광학적 투명도를 조절할 수 있는 대전방지 보호필름을 제작하는 새로운 방법을 제시하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1669-1678
• /
• 2011

Six new binuclear copper(II) complexes have been prepared by template condensation of the dialdehydes 1,8-[bis(3-formyl-2-hydroxy-5-methyl)benzyl]-l,4,8,11-tetraazacyclotetradecane (PC-a) and 1,8-[bis(3-formyl-2-hydroxy-5-bromo)benzyl]-l,4,8,11-tetraazacyclotetradecane (PC-b) with appropriate aliphatic diamines, and copper(II) perchlorate. The structural features of the complexes have been confirmed by elemental analysis, IR, UV-vis and mass spectra etc. The electrochemical behavior of all the copper(II) complexes show two irreversible one electron reduction process. The room temperature magnetic moment studies depict the presence of an antiferromagnetic interaction in the binuclear complexes. The catechol oxidation and hydrolysis of 4-nitrophenylphosphate were carried out by using the complexes as catalyst. The antimicrobial screening data show good results. The binding of the complexes to calf thymus DNA (CT DNA) has been investigated with absorption and emission spectroscopy. The complex [$Cu_2L^{1a}$] displays significant cleavage property of circular plasmid pBR322 DNA in to linear form. Spectral, electrochemical, magnetic and catalytic studies support the distortion of the copper ion geometry that arises as the macrocyclic ring size increases.

• 청정기술
• /
• 제7권3호
• /
• pp.215-223
• /
• 2001

A present semiconductor cleaning technology is based upon RCA cleaning technology which consumes vast amounts of chemicals and ultra pure water(UPW) and is the high temperature process. Therefore, this technology gives rise to the many environmental issues, and some alternatives such as electrolyzed water(EW) are being studied. In this work, intentionally contaminated Si wafers were cleaned using the electrolyzed water. The electrolyzed water was generated by an electrolysis system which consists of three anode, cathode, and middle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case of NH4Cl electrolyte, the oxidation-reduction potential and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.8, and -750mV and 10.0, respectively. AW and CW were deteriorated after electrolyzed, but maintained their characteristics for more than 40 minutes sufficiently enough for cleaning. Their deterioration was correlated with CO2 concentration changes dissolved from air. Contact angles of UPW, AW, and CW on DHF treated Si wafer surfaces were measured to be $65.9^{\circ}$, $66.5^{\circ}$ and $56.8^{\circ}$, respectively, which characterizes clearly the eletrolyzed water. To analyze the amount of metallic impurities on Si wafer surface, ICP-MS was introduced. It was known that AW was effective for Cu removal, while CW was more effective for Fe removal. To analyze the number of particles on Si wafer surfaces, Tencor 6220 were introduced. The particle distributions after various particle removal processes maintained the same pattern. In this work, RCA consumed about $9{\ell}$ chemicals, while EW did only $400m{\ell}$ HCl electrolyte or $600m{\ell}$ NH4Cl electrolyte. It was hence concluded that EW cleaning technology would be very effective for promoting environment, safety, and health(ESH) issues in the next generation semiconductor manufacturing.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.265-270
• /
• 2017

4H-SiC has attracted attention for high-power and high-temperature metal-oxide-semiconductor field-effect transistors (MOSFETs) for industrial and automotive applications. The gate oxide in the 4H-SiC MOS system is important for switching operations. Above $1000^{\circ}C$, thermal oxidation initiates $SiO_2$ layer formation on SiC; this is one advantage of 4H-SiC compared with other wide band-gap materials. However, if post-deposition annealing is not applied, thermally grown $SiO_2$ on 4H-SiC is limited by high oxide charges due to carbon clusters at the $SiC/SiO_2$ interface and near-interface states in $SiO_2$; this can be resolved via low-temperature deposition. In this study, low-temperature $SiO_2$ deposition on a Si substrate was optimized for $SiO_2/4H-SiC$ MOS capacitor fabrication; oxide formation proceeded without the need for post-deposition annealing. The $SiO_2/4H-SiC$ MOS capacitor samples demonstrated stable capacitance-voltage (C-V) characteristics, low voltage hysteresis, and a high breakdown field. Optimization of the treatment process is expected to further decrease the effective oxide charge density.

• 한국세라믹학회지
• /
• 제45권9호
• /
• pp.549-555
• /
• 2008

The thermal barrier coating must withstand erosion when subjected to flowing gas and should also maintain good stability and mechanical properties while it must also protect the turbine component from high temperature, hot corrosion, creep, and oxidation during operation. In this study we investigated the influence of subsurface layer, $Al_2O_3$ or NiCrCoAIY bond coat layer, on the indentation damage behavior of YSZ thermal barrier coating layers deposited by electron beam physical vapor deposition (EB-PVD). The bond coat is deposited using different process such as air plasma spray (APS) or spray of high velocity oxygen fuel (HVOF) and the thickness is varied. Hertzian indentation technique is used to induce micro damages on the coated layer. The stress-strain behaviors are characterized by results of the indentation tests.

• 한국결정성장학회지
• /
• 제27권6호
• /
• pp.303-308
• /
• 2017

여러 가지 금속을 에칭하기 위하여 사용된 $FeCl_3$ 폐용액은 유가금속인 니켈을 함유하고 있다. 본 연구에서는 염화철을 재생하고 남은 니켈 함유 에칭폐액으로부터 니켈을 고순도의 탄산니켈 결정분말로 회수하고자 하였다. 5 % NaOH 수용액을 이용하여 pH 4의 조건에서 1차적으로 철 성분의 불순물을 약 97 % 제거하고 추가적으로 남은 불순물을 제거하기 위하여 용매추출제 D2EHPA(Di-(2-ethylhexyl) phosphoric acid)를 사용하여 불순물로서 존재하는 금속이온들을 약 99% 제거하였다. 그 후 불순물이 제거된 염화니켈 용액에 탄산나트륨과의 반응을 통하여 99.9 % 이상의 순도를 가진 탄산니켈분말을 얻을 수 있었다.

• 자원환경지질
• /
• 제48권6호
• /
• pp.525-536
• /
• 2015

트라피체 프로젝트는 현재 탐사단계 중 후기(Advanced exploration)단계의 프로젝트이며 안다우아일라스-야우리 광상구 연변에 나타나는 다양한 반암 광상 중 일부라고 볼 수 있다. 이 광상은 몬조나이트 반암의 관입과 관계가 있으며, 또한, 올리고세 각력 파이프와 밀접한 관계를 가지고 있는 광상이다. 광화작용은 일차 유화광물인 황철석, 황동석, 반동석 및 휘수연석으로 구성된다. 2차 유화광물인 휘동석, 코벨라이트, 다이게나이트가 산출되며 산화동으로서 공작석, 흑동석, 적동석등이 산출된다. 침출작용(lixiviation)이나 부화과정 결과로서, 광화작용은 비전형적인 누대구조를 보여주기도 한다. 각력과 반암이 나타나는 구역에서는 수직적인 누대구조를 보여주는데, 북쪽 인근에서는 침출대, 2차부화대, 전이대 및 초생광화대가 나타나고 광상의 서쪽에서는 산화대 및 혼합대가 좁게 나타난다. 광상의 추정자원은 920 Mt @ 0.41% Cu이며 한계품위는 0.15%로 산정하고 있다.

• Elastomers and Composites
• /
• 제37권2호
• /
• pp.99-106
• /
• 2002

본 연구에서는 산소 플라즈마 처리에 의한 카본블랙의 표면특성과 카본블랙/고무 복합재료의 기계적 계면물성에 대하여 고찰하였다. 산소플라즈마의 산화반응에 의한 카본블랙 표면특성은 표면산도-염기도와 제타전위, 그리고 X-ray photo-electron spectroscopy (XPS)를 통하여 알아보았으며 카본블랙/고무 복합재료의 기계적 물성은 인열에너지 ($G_{III}c$)를 측정하여 관찰하였다. 본 실험결과로부터 플라즈마 처리에 의해 카본블랙 표면에 카르복시기, 하이드록시기, 락톤, 카르보닐기와 같은 산소를 함유하는 극성관능기들이 플라즈마 처리시간이 증가함에 따라 증가하는 경향을 나타내었으며, 카본블랙 표면에 산소를 함유한 관능기와 극성고무인 NBR과 높은 상호작용으로 인해 카본블랙과 고무사이의 계면 결합력이 증가하여 카본블랙/고무 복합재료의 기계적 계면물성인 tearing energy가 증가한 것을 확인할 수 있었다.