• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.220-223
• /
• 2010

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.265-266
• /
• 2002

휘발성 유기화합물(Volatile Oraganic Compounds: VOCs)은 오존 등의 광화학 스모그 생성의 원인물질일 뿐만 아니라 발암성의 유해물질, 지구온난화, 대기중의 악취물질 등으로 환경 및 건강에 악영향을 초래한다. 최근 들어 VOCs에 대한 대기중 배출규제가 강화됨에 따라 이를 효과적으로 제거 또는 회수하는 연구가 매우 중요시되고 있으며, 활성탄을 이용한 흡착은 이러한 기체상의 VOCs 분자를 고체 흡착제에 약한 분자력의 인력에 의해 접촉시켜 분리하는 공정으로 회수율 및 에너지 절약의 관점에서 효과적인 방법으로 알려져 있다. (중략)

• Journal of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.309-319
• /
• 1970

Composition of Acid Clay, the raw material for activated clay manufacturing, was investigated to develop useful data in deciding activation condition. Speculations on components and structure of activated clay were also made in order to see how included components of raw materials change during activation process. And a study was made on relations between structure of activated its adsorptivity. For this research, theremogravimetric analysis, X-ray differaction analysis and calculation of adsorptive index were carried out.

• Carbon letters
• /
• v.26
• /
• pp.81-87
• /
• 2018

Morphological differences in multi-layered graphene flakes or graphene nanoplatelets prepared by oxidative (rGO-NP, reduced graphene oxide-nanoplatelets) and non-oxidative (GIC-NP, graphite intercalation compound-nanoplatelets) routes were investigated with various analytical methods. Both types of NPs have similar specific surface areas but very different structural differences. Therefore, this study proposes an effective and simple method to identify structural differences in graphene-like allotropes. The adsorptive potential peaks of rGO-NP attained by the density functional theory method were found to be more scattered over the basal and non-basal regions than those of GIC-NP. Raman spectra and high resolution TEM images showed more distinctive crystallographic defects in the rGO-NP than in the GIC-NP. Because the R-ratio values of the edge and basal plane of the sample were maintained and relatively similar in the rGO-NP (0.944 for edge & 1.026 for basal), the discrepancy between those values in the GIC-NP were found to be much greater (0.918 for edge & 0.164 for basal). The electrical conductivity results showed a remarkable gap between the rGO-NP and GIC-NP attributed to their inherent morphological and crystallographic properties.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.943-962
• /
• 2014

Industrial gas drying, dilute gas mixtures purification, air fractionation, hydrogen production from steam reformers and petroleum refinery off-gases, etc are conducted by using adsorptive separation technology. The pressure swing adsorption (PSA) has certain advantages over the other methods, such as absorption and membrane, that are a low energy requirement and cost-effectiveness. A key component of PSA systems is adsorbents that should be highly selective to a gas being separated from its mixture streams and have isotherms suitable for the operation principle. The six standard types of isotherms have been examined in this review, and among them the best behavior in the adsorption of $CO_2$ as a function of pressure was proposed in aspects of maximizing a working capacity upon excursion between adsorption and desorption cycles. Zeolites and molecular sieves are historically typical adsorbents for such PSA applications in gas and related industries, and their physicochemical features, e.g., framework, channel structure, pore size, Si-to-Al ratio (SAR), and specific surface area, are strongly associated with the extent of $CO_2$ adsorption at given conditions and those points have been extensively described with literature data. A great body of data of $CO_2$ adsorption on the nanoporous zeolitic materials have been collected according to pressure ranges adsorbed, and these isotherms have been discussed to get an insight into a better $CO_2$ adsorbent for PSA processes.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.141-147
• /
• 1994

The adsorptive stripping voltammetry of corticosterone was studied in $1.0{\times}10^{-2}M$ sodium hydroxide as supporting electrolyte. The analytical conditions were as follow : 360 sec. for deposition time, -8.0 volts deposition potential, medium size mercury drop, and 20mV/sec scan rate. Calibration curve has shown a linearlity in the range of $5.0{\times}10^{-9}M$ to $8.0{\times}10^{-7}M$ and the detection limits have been $9.5{\times}10^{-10}M$ for corticoterones. This method has shown such a high sensitivity even in dilute solution that has been useful for analyzing sex hormones in medical supplies without interference of additives.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.186-190
• /
• 1995

A simple procedure, readily available at low cost with a sensitivity sufficient to determine trace levels of iron in seawater is proposed, which utilizes adsorptive accumulation of the iron/catechol complex on the mercury drop electrode in a borate medium of pH 8.0. Optimal conditions include a solution concentration of 2 mM catechol, 2.5 mM borate and a pH of 8.0, an accumulation potential of - 0.25 V is applied for 1∼3 min, and the potential scan is in the differential pulse mode. The limit of detection is 1.5 nM Fe using a preconcentration time of 3 min. The interference from copper can be eliminated and baseline slope is greatly improved, because its peak is well separated from that of iron in the proposed medium.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.534-539
• /
• 2010

The adsorptive removal of organic sulfur compounds including tert-butylmercaptane(TBM), tetrahydrothiophene(THT) and dimethylsulfide(DMS) in methane was investigated over NaY and copper-exchanged NaY(CuNaY) zeolites at 303 K and atmospheric pressure. In the ternary adsorption system, the preferential adsorption of THT over other sulfur compounds on NaY and the concurrent adsorption of all sulfur compounds on CuNaY were achieved, which could be explained by the breakthrough curve, the temperature-programmed desorption, and the apparent activation energy for desorption. The sulfur uptake capacity of CuNaY(2.90~3.20 mmol/g) was much higher than that of NaY(0.70~0.90 mmol/g). A comparative study indicated that the $Cu^{1+}$ sites and acidity of CuNaY were probably responsible for the strong interaction with sulfur atom and high sulfur uptake abilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.63-68
• /
• 1982

This study was aimed ultimately to develop an adsorption process treating heavy metal industrial wastewater by utilizing domestically abundant natural zeolite and the study was conducted in a series of investigations. Presented if1 this paper are the results of the preliminary batch mode test. Factors affecting an adsorption process of heavy metals of aqueous waste stream by zeolite are numerous. Factors such as hydrogen ion concentration and temperature are taken into consideration in the investigation to evaluate adsorptive capacity. The mechanisms of adsorption may better be described by an evaluation of adsorption isotherm andi of adsorption kinetics. It is observed from the preliminary investigation that an optimum adsorption occurs at higher pH's than 4. It is further demonstrated that $Cd^{+2}$ adsorption by zeolite follows the BET model better than the Freundlich and the Langmuir model and that the reaction time of at least 10 minutes is required. It is interesting to note that higher adsorptive capacity was found at higher temperature, suggesting that the adsorption is not only due to simple physisorption but also due to chemisorption.

• Journal of Korean Society on Water Environment
• /
• v.22 no.6
• /
• pp.991-995
• /
• 2006

The layered double hydroxide with the insertion of chloride ions (LDH-Cl), which was synthesized by the co-precipitation method, was applied to investigate the fundamental aspects of the absorptive agent for phosphate removal from wastewater. The adsorption capacity was best described by the Langmuir-FreundIich isotherm, and the estimated isotherm parameters indicate that the LDH-CI capacity for the phosphate removal is much higher than that observed using a natural adsorbent material such iron oxide tailing. The kinetic experiment also showed that the LDH-Cl adsorption reaction rapidly at the adsorptive rate of 0.55 mg-P/g-LDH/min, implying that this adsorbent can be of use in the full-scale applications. The pH had a minimal effect on the LDH adsorption capacity in the range of 5 to 11, although the capacity dropped at the low pHs because of the change in LDH surface properties. Furthermore, other anions such as $Cl^-$ and $NO_3{^-}$ commonly found in the wastewater streams insignificantly affected the phosphate removal efficiencies, while $HCO_3{^-}$ ions had a negative effect on the LDH adsorption capacity due to its high selectivity. The phosphate removal experiment using the actual secondary effluent from a wastewater treatment plant showed the similar decrease in adsorption capacity, indicating that the bicarbonate ions in the wastewater were competing with phosphate for the adsorptive site in the surface of the LDH-Cl. Overall, the synthetic adsorbent material, LDH-Cl, can be a feasible alternative over other conventional chemical agents, since the LDH-Cl exhibits the high phosphate removal capacity with the low sensitivity to other environmental conditions.