• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2004

A FinFET, a novel double-gate device structure is capable of scaling well into the nanoelectronics regime. High-performance CMOS FinFETs , fully depleted silicon-on-insulator (FDSOI) devices have been demonstrated down to 15 nm gate length and are relatively simple to fabricate, which can be scaled to gate length below 10 nm. In this paper, some of the key elements of these technologies are described including sub-lithographic pattering technology, raised source/drain for low series resistance, gate work-function engineering for threshold voltage adjustment as well as metal gate technology, channel roughness on carrier mobility, crystal orientation effect, reliability issues, process variation effects, and device scaling limit.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.725-727
• /
• 1998

It is difficult to determine the controller parameters that we can get optimum response of the controlled process variable. In this paper we investigate the effects of various elements of which a gas turbine MW control loop is consists. And we describe the result of actual adjustment on the parameters of these elements to improve the speed regulation of a gas turbine.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.472-477
• /
• 1987

In order to prevent the short-channel effects due to threshold voltage adjustment implantation in conventional n+ doped silicon gate process, a new approach involving automatic doping of polycide by boron during source and drain implantation is introduced. P-MOSFET devece fabricated by theis approach shows improved short channel characteristics than conventional device with n+ doped gate. Some concerns of adopting this approach in CMOS technology are addressed togetheer with some suggestions.

• Journal of Korea Port Economic Association
• /
• v.21 no.3
• /
• pp.239-258
• /
• 2005

Port e-Transformation would employ new technologies such as CRM, SCM, ERP to all the port facilities and improve the efficiency of management for ports. In this paper, firstly, we analyze classification organization of Port e-Transformation technology. Secondly, understand the current situation on each component of Port e-Transformation. Thirdly, present tasks for each component of it. Finally, propose problems and its solving methods for these tasks. However, rationalization of management for internal structure occurred during process of Port e-Transformation and new adjustment of laws related to port are not included in this paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.524-531
• /
• 2013

This work aims at developing a RTB (Rotor Track and Balance) system to alleviate imbalances originating from various sources encountered during blade manufacturing process and environmental factors. The analytical RTB model is determined based on the linear regression analysis to relate the RTB adjustment parameters and their track and vibration results. The model is validated using the flight test data of a full helicopter. It is demonstrated that the linearized model has been correlated well with the test data. A hybrid optimization problem is formulated to find the best solution of the RTB adjustment parameters using the genetic algorithm combined with the PSO (Particle Swarm Optimization) algorithm. The optimization results reveal that both track deviations and vibration levels under various flight conditions become decreased within the allowable tolerances.

• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.90-95
• /
• 1996

This study was performed to calculate the degration rate coefficient, operating parameters to meet the effluent standards, and the temperature adjustment coefficients to each parameter of pollution by seasonal variation of concentration and temperature of influent in livestock wastewater treatment by sequencing batch reactor process in field scale. The followings are the conclusions that were derived from this study. 1. In the field, temperature of livestock wastewater in reactor was 20.3$\circ$C in summer and 6.0$\circ$C in winter. The ratio of BOD:TKN: T-P in influent was 100:80:7. BOD loadings in winter and spring were 0.26 and 0.43 kg $BOD/m^3$ day, respectively. Those in summer and fall were 0.25 and 0.13 kg $BOD/m^3$ day, respectively. 2. The degradation rate coefficient for TKN was larger in summer and fall in which temperature was high than that in which temperature was high than that in winter and spring in which concentration was high. On the contrary, the phosphorus uptake rate was larger in winter and spring than that in summer and fall. 3. The hydraulic retention time in winter and spring was longer than that in summer and fall. Especially, in order to meet the standard for TKN of 120 mg/l in winter in which temperature of wastewater was 6.0$\circ$C, as the MLSS concentration was increased from 4, 000 to 7, 000 mg/l, the hydraulic retention time was increased from 212 to 121 hours. But, in order to shorten that less than 121 hours for the economical wastewater treatment, countermeasure to increase temperature of wastewater in the reactor should be considered. 4. the temperature adjustment coefficients for BOD, $COD_{Mn}$, TKN and T-P were 1.0241, 1.0225, 1.0541 and 1.0495, respectively. Namely, the treatment of TKN was most sensitively affected by temperature. For the purpose of the effective removal of nitrogen and phosphorus which are sensitive to temperature, it is necessary to keep the temperature of livestock wastewater more than 20$\circ$C which is the temperature of it in summer.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.565-578
• /
• 2018

In this paper, we investigate the feasibility of modelling image strips, instead of individual scenes, that have been acquired from the same orbital pass through the process of bundle adjustments. Under this approach, First, a rational function model (RFM) of the strip image is generated from the RFMs of individual images, such that the entire strip of images can be treated as a single image. Correction parameters are calculated through bundle adjustments between strip images. For the experiment, we used two stereo strips. Each strip image consists of three KOMPSAT-3A scenes. Experimental results show that it was possible to improve the initial model by using the control points located in a specific region of the strip. We showed that absolute orientation with moderate accuracy of 2 m errors were achieved from 12 ground control points for the three-image strips. The test results indicate that bundle adjustment of strip images could be more efficient than bundle adjustments of the individual scenes.

• Journal of the Korean School Mathematics Society
• /
• v.15 no.3
• /
• pp.467-486
• /
• 2012

By identifying the state of adjustment regarding mathematical education for adolescents who escaped from North Korea and analyzing the relevant factors from multiple perspectives, this study is aimed at finding improvement methods for their math education adoptability. To fulfill such objective, this paper-reviewed the existing literature and research, conducted participatory observation, collected and analyzed survey research on math education adoptability for 43 students who are currently attending an alternative school for North Korean defectors. The results of this research are as follows: There is a serious pattern of maladjustment concerning math education of adolescents who defected from North Korea. The lack of basic skills in mathematical principles due to the gap in their studies results in poor academic performance, particularly in the advanced stages of learning. In the process of defection, environmental challenges, such as the loss of basic study skills which naturally results from the gap in their studies and differences in the educational curriculum between North and South Korea, are posing difficulties for these students.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.323-330
• /
• 2005

More than ten years after the era of GPS-Photogrammetry which could provide us only three projection center of all six exterior orientation parameters, direct georeferencing with GPS/INS is now becoming a standard method for image orientation. Its main advantage is to skip or reduce the indirect ground control process. This paper describes the experimental test results of integrated sensor orientation with a commercial GPS/IMU system to approve its performance in determination of exterior orientation. For this purpose two different imaging blocks were planned and the area was photographed at a large photo scale of 1:5,000 and a medium photo scale of 1:20,000. From these data set a variety of meaningful results was acquired, i.e., the accuracy. potential of exterior orientation from direct georeferencing and combined block adjustment using these data considering different photo scales and conditions.

• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.218-228
• /
• 2000

Background : Among 'structure', 'process' and 'outcome' approaches, outcome evaluation is considered as the most direct and best approach to assess the quality of health care providers. Risk-adjustment is an essential method to compare outcome across providers. This study has aims to judge performance of hospitals by severity adjusted mortality rates of coronary artery bypass graft (CABG) surgery. Methods : Medical records of 584 patients who got the CABG surgery in 6 general hospitals during 1996 and 1997 were reviewed by trained nurses. The MedisGroups was used to quantify severity of patients. The predictive probability of death was calculated for each patient in the sample from a multivariate logistic regression model including the severity score, age and sex. For evaluation of hospital performance, we calculated ratio of observed number to expected number of deaths and z score [(observed number of deaths - expected number of deaths)/square root of the variance in the number of deaths], and compared observed mortality rate with confidence interval of adjusted mortality rate for each hospital. Results : The overall in-hospital mortality was 7.0%, ranged from 2.7% to 15.7% by hospital. After severity adjustment the mortality by hospital was from 2.7% to 10.7%. One hospital with poor performance was distinctly divided from others with good performance. Conclusion : In conclusion, severity-adjusted mortality rate of CABG surgery might be applied as an indicator for hospital performance evaluation in Korea. But more pilot studies and improvement of methodologies has to be done to use it as quality indicator.