• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.99-108
• /
• 2008

For video compression, we have to consider two performance factors that are the search speed and coded video's quality. In this paper, we propose an enhanced fast block matching algorithm using the spatial correlation of the video sequence and the center-biased characteristic of motion vectors(MV). The proposed algorithm first finds a predicted motion vector from the adjacent macro blocks of the current frame and determines an exact motion vector using the cross pattern and a flat hexagon search pattern. From the performance evaluations, we can see that our algorithm outperforms both the hexagon-based search(HEXBS) and the cross-hexagon search(CHS) algorithms in terms of the search speed and coded video's quality. Using our algorithm, we can improve the search speed by up to 31%, and also increase the PSNR(Peak Signal Noise Ratio) by at most 0.5 dB, thereby improving the video quality.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.645-646
• /
• 2008

Silhouette extraction is widely used in many computer graphics applications. In this paper, we proposed a method for extracting 3D silhouette and internal pattern from 3D vector data. To do this, we first make an edge-list, secondly define the silhouette, and finally remove hidden lines. After getting the silhouette, we extract internal pattern using adjacent edge's dihedral. The proposed method not only effectively improves the performance of extracting 3D silhouette and internal pattern from 3D vector data but also reduces the computational complexity.

• Journal of Biomedical Engineering Research
• /
• v.14 no.2
• /
• pp.185-193
• /
• 1993

In this paper, the peak detection algorithm was developed for the purpose of screening of the target compounds. Algorithm is divided into searching the characteristic ion and peak detection. The heuristic knowledge about analytical chemistry was applied for the searching the characteristic ion. Peak detection was accomplished in comparison with the peak identification strings and pattern strings around the retention time. Pattern strings are composed with the number which generated by pattern identification function. The variables of pattern identification function are the codes which represent the difference of two adjacent abundances Some of the free steroids were selected to demonstrate the proposed algorithm.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.97-114
• /
• 1999

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for maxillary molar occlusion. The results of the study were as follows ; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of Maxillary premolar is appeared V form. 6. The development groove of Maxillary molar is appeared W form. 7. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 8. I was knew that the lingual groove and stuart's groove of molar runs parallel with oblique ridge. 9. The buccal groove of molar is formed parallel with direction of teeth arrangement.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.4
• /
• pp.299-304
• /
• 2011

As more satellites are designed to downlink their observed image data through the X-band frequency band, it is inevitable that the occupied bandwidth of a target satellite will overlap with that of other X-band downlink satellites. For sun-synchronized low earth orbit satellites, in particular, it can be expected that two or more satellites be placed within the looking angle of a ground station antenna at the same time. Due to the overlapping in the frequency band, signals transmitted from the adjacent satellites act as interferers, leading to degraded link performance between target satellite and ground station. In this paper, link analysis was initiated by modeling the radiation pattern of ground station antenna through a validated Jet Propulsion Laboratory peak envelope model. From the relative antenna gain depending on the offset angle from center axis of maximum antenna directivity, the ratio of received interference signal level to the target signal level was calculated. As a result, it was found that the degradation increased when the offset angle was within the first point of radiation pattern. For a 7.3 m antenna, serious link degradation began at an offset angle of 0.4 degrees. From this analysis, the link performance of the coming satellite passes can be recognized, which is helpful to establish an operating procedure that will prevent the ground station from receiving corrupted image data in the event of a degraded link.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.459-468
• /
• 2023

Power plant is a kind of basic industrial facility and might cause fatal industrial and human damage. In this study, the characteristics and effect of blast-induced vibration for tunnelling which underpass ○○ power plant in operation were evaluated. Previous blasting cases adjacent to industrial facilities were intensively reviewed, then allowable vibration criteria were suggested. 3 dimensional dynamic numerical analysis based on finite element method was performed to investigate particle velocity and resonance was examined by calculating the predominant frequencies. As a result, particle velocity at pump foundation which is nearest to the source was approached to the allowable criteria, therefore, the modified blasting pattern was newly suggested and confirmed the attenuation effect based on the test blasting. Consequently, appropriated decision-support procedure was established in case of adjacent blasting to industrial facilities.

• Ocean and Polar Research
• /
• v.42 no.3
• /
• pp.211-223
• /
• 2020

With the increasing demand for improved marine environments and safety, greater ability to minimize damages to coastal areas from harmful organisms, ship accidents, oil spills, etc. is required. In this regard, an accurate assessment and understanding of current systems is a crucial step to improve forecasting ability. In this study, we examine spatial and temporal characteristics of current systems in the adjacent seas of Jeju Island using a high-resolution regional ocean circulation model. Our model successfully captures the features of tides and tidal currents observed around Jeju Island. The tide form number calculated from the model result ranges between 0.3 and 0.45 in the adjacent seas of Jeju Island, indicating that the dominant type of tides is a combination of diurnal and semidiurnal, but predominantly semidiurnal. The spatial pattern of tidal current ellipses show that the tidal currents oscillate in a northwest-southeast direction and the rotating direction is clockwise in the adjacent seas of Jeju Island and counterclockwise in the Jeju Strait. Compared to the mean kinetic energy, the contribution of tidal current energy prevails the most parts of the region, but largely decreases in the eastern seas of Jeju Island where the Tsushima Warm Current is dominant. In addition, a Lagrangian particle-tracking experiment conducted suggests that particle trajectories in tidal currents flowing along the coast may differ substantially from the mean current direction. Thus, improving our understanding of tidal currents is essential to forecast the transport of marine pollution and harmful organisms in the adjacent seas of Jeju Island.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.59-72
• /
• 2004

The objectives of this study were to investigate the perceptions of Korean female university students for clothing pattern tendency and structural element of clothing pattern image dimension and to find how individual personality type influence the preferred clothing pattern characteristics. For this study, a questionnaire was designed and sent to 600 female university students of Daejeon, Seoul and metropolitan area. The tool used in this study was MBTI(The Myers-Briggs Type Indicator) Form G Korean version and for the analysis of data SPSS 10.0 package were used. 10 representative patterns for this study were floral, dot, stripe, check, animal, abstract & artistic, geometric, vegetable & leaf, paisely, patchwork pattern. The data were analyzed by factor analysis, arithmetic mean, One-Way ANOVA, x²-test. The major findings were as follows: Clothing pattern image dimension perceived by Korean female university students for 10 representative patterns were basic form, deluxe, specialty, and cultural dimension. Among them, basic form and deluxe dimension were major dimensions. In basic form dimension, dot pattern score was high indicating female students perceive it as light, comfortable, clean, cool and simple pattern image. In deluxe dimension, floral pattern scored high and in specialty dimension, abstract and artistic pattern scored high among other pattern image. In cultural dimension, geometric pattern and check pattern scored high. Based on other detailed analysis results, It is concluded that the personality type greatly influence clothing pattern evaluation. For example, in case of color combination of patchwork pattern, there was a difference in color preference depend on a personality type such as sensing(S) or intuition(N). Therefore, sensing personality type preferred adjacent color combination than contrast color combination. Detailed marketing strategy is necessary in planning textile design of merchandise plan.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.164-172
• /
• 2019

Current clinical methods for diagnosing urination disorder are invasive, expensive, and very inconvenient to perform continuous monitoring. EIT is a non-invasive technique that injects electrical current through an external electrodes and measures the induced voltage to visualize the internal electrical (impedance) characteristics, which makes it possible to monitor bladder conditions with low cost. The signal characteristics of the measured voltage data changes according to the current pattern injected through the electrode and affects reconstruction performance. In this paper, image reconstruction performance is compared and analyzed according to the injected current patterns to maximize the sensitivity to the variation of bladder size.