• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.45-52
• /
• 2008

In typical cellular systems using frequency reuse scheme, the terminal suffers a performance degradation due to the intercell interference signals from adjacent cells as the terminal moves toward the cell boundary. In this paper, a signal transmission and reception scheme which achieve spatial multiplexing and beamforming gain from a distributed MIMO (multiple-input multiple-output) channel using multiple-antenna terminal is proposed for the spectral efficiency enhancement in a multi-cell downlink environment, when geographically separated base stations cooperatively transmit signals. In particular, we analyze the effective signal-to-interference ratio and spectral efficiency of the proposed scheme for different frequency reuse patterns and for varying numbers of receive antennas, and compare with the performance of the MRC (maximal ratio combining) reception scheme in typical cellular systems. We evaluate the amount of transmission efficiency of the scheme by comparing the performance near the cell boundary where the strong intercell interference is experienced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1038-1044
• /
• 2011

In this paper, the multichannel intermediate frequency transceiver for broadband multimedia system is designed and the experimental results are analyzed. Basic elements of the transceiver such as frequency synthesizer, amplifier, mixer, automatic gain control amplifier are introduced. The analysis technique described here applies not only to amplifier but also to any other nonlinear components such as mixers and frequency doubler. Through the investigation of the power spectrum density of the transmitted signal, the phase noise of the local oscillator is evaluated below 70 dBc/kHz. The frequency characteristics of the modulated signal is flat within the system bandwidth. Also the effects of adjacent channel interference and supurious emission are analyzed. And the function of automatic gain control amplifier is well operated.

• Development and Reproduction
• /
• v.21 no.4
• /
• pp.379-389
• /
• 2017

Connexin (Cx) involves in the regulation of various physiological functions of tissue by forming a channel, a gap junction which allows direct cell-cell communication, between adjacent cells. The effect of a single subcutaneous treatment of estradiol benzoate (EB) or flutamide (Flu) at the weaning age on the expression of Cx isoforms in the adult caput epididymis was evaluated in this research. Using quantitative real-time PCR analysis, a low-dose of EB [$0.015{\mu}g/kg$ body weight (BW)] caused significant decreases of Cx30.3, Cx32, Cx40, Cx43, and Cx45 mRNA levels and no change of Cx26, Cx31, Cx31.1, Cx37 transcript levels. The treatment of a high-dose EB ($1.5{\mu}g/kg\;BW$) resulted in reduced expression of Cx30.3, Cx31, Cx43, and Cx45 but increased expression of Cx37 and Cx40. Expression of all Cx isoforms examined, except Cx31, was significantly increased by the treatment of a low-dose Flu ($500{\mu}g/kg\;BW$). However, the treatment of a high-dose Flu (5 mg/kg BW) led significant expressional suppression of Cx30.3, Cx31, Cx31.1, Cx32, Cx40, Cx43, and Cx45 but an increase of Cx37 transcript level. With the comparison of previous findings, the expression of Cx isoforms in the adult epididymis after the exposure to EB or Flu is likely differentially regulated in regional-specific and/or exposed postnatal age-specific manner.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.127-130
• /
• 2010

The reception quality of broadcasting in car radio system may become poor due to the noise such as week signal strength, multipath, Adjacent Channel and so on. To improve this, some european nations and U.S. serve RDS(Radio Data System) on FM radio. AF(Alternative Frequency) and PI(Programme Identification) code contained information in RDS data are used to switch to the broadcasting having the best reception quality. There are many techniques and studies of maintaining the best reception quality. But many previous techniques are no longer the best way because RF chips are improved every year and noise components can be distinguished in detail. So this research will suggest the best switching technique to maintain the best reception quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2261-2266
• /
• 2009

A novel adaptive phase calibration method is proposed for nonlinear amplifiers. Based on the adaptive process of simple phase vector calculations, the AM/PM distortion can be significantly reduced for various input power. The performance of the proposed method is evaluated for up to 80 % improvements in AM/PM distortions, compared with the distortion of a conventional amplifier. Moreover, by means of an additional envelope-compensation technique, the improvement of the adjacent channel power ratio (ACPR) is presented.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.256-262
• /
• 2006

This paper proposes a new predistortion linearizer to compensate for AM/AM and AM/PM in the nonlinear characteristics of amplifier. This consists of common-emitter amplifier and schottky diode that is connected between emitter and ground. When effective resistance of the schottky diode with bias condition varies, common-emitter amplifier with series feedback has a increase of amplitude and expansion of phase. This makes a amplifier nonlinear characteristics are to be improved. The proposed linearizer and amplifier has been manufactured and tested to operate in cellular base station frequency (869~894MHz). The test results show that third order intermodulation distortion (IMD3) cab be removed by more than 10.4dB in case of CW 2-tone signals ${\Delta}f$=1MHz, and the adjacent channel power ratio (ACPR) also can be improved by more than 9.6dB for CDMA IS-95 1FA signals.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.859-864
• /
• 2010

In the next generation system, a study on realization of Multi-Core system is in progress for applying it in multi service network. Therefore some mobile systems are expected to be appeared. These systems can support WiBro, WCDMA, CDMA, etc with single terminal. These systems have to support various FA using broadband frequency and hand over to other service network. Especially, in the telecommunication system composed of cell, the transmit power can be interference at adjacent system, has effect on system channel capacity and cell size. In this paper, we improve the unstable transmit power caused by unsettled system operation, propose the RF(Radio Frequency) Calibration method which can use the transmit power stably even during hand over between heterogeneous networks causing unstable power change. Also we used proposed method and analysed used electricity of system during hand over between heterogeneous networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.33-38
• /
• 2008

The probability of an oscillation occurrence in M/W frequency conversion repeaters is low on account of the different operating frequency of the input and output signals. The probability of interference caused by the M/W frequency conversion repeaters to other systems is also low because the systems are used in the line-of-sight. Therefore M/W frequency conversion repeaters are generally used for retransmitting the signal received from base station to the islands. This paper describes the design and implementation of analog predistorter for M/W frequency conversion repeaters in mobile communications. The M/W repeaters convert IF frequency of 1010+/-10MHz to RF frequency of 11GHz. A predistorter can be designed for the M/W repeater operating in either IF or M/W frequency. In this paper IF predistorter operated in 1010MHz is designed and implemented because a M/W predistorter operated in 11GHz is difficult to implement. The IF predistorter can linearize RF modules in the repeater followed by IF stages. The performance test results show that the implemented analog predistorter improves ACPR of 10dB at the output power of 25dBm with the signal frequency of 10.805GHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.160-163
• /
• 2009

HPA is one of the most essential device in wireless communication systems. However, because of nonlinear characteristic of HPA transmit signal is distorted with both amplitude and phase, this distortion leads to deepening adjacent channel interference. So a technique to change the nonlinear characteristic with linear characteristic is needed. In this paper, Among all techniques, we adopts a polynomial pre-distortion technique. Pre-distorted signal by pre-distorter has opposite characteristic with HPA. In result, the signal passed through pre-distorter and HPA has linear characteristic. But the accuracy of opposite characteristic of HPA is decreased at near portion of saturation point. So we improve the accuracy of opposite characteristic of HPA by using PAPR reduction method. In this paper, an adaptive polynomial pre-distortion technique is introduced to counterbalance the nonlinear characteristic of the transmit power amplifier, and a PAPR reduction method is introduced to increase efficiency of polynomial pre-distorter.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.2
• /
• pp.87-96
• /
• 2019

Low power issue is one of the most critical problems in the Internet of Things (IoT), which are powered by battery. To solve this problem, various approaches have been presented so far. In this paper, we propose a method to reduce the power consumption by reducing the numbers of accesses into the flash memory consuming a large amount of power for on-chip software execution. Our approach is based on using cooperative logging structure to distribute the sampling overhead in single sensor node to adjacent nodes in case of rare-event applications. The proposed algorithm to identify event occurrence is newly introduced with negative feedback method by observing difference between past data and recent data coming from the sensor. When an event with need of flash access is determined, the proposed approach only allows access to write the sampled data in flash memory. The proposed event detection algorithm (EDA) result in 30% reduction of power consumption compared to the conventional flash write scheme for all cases of event. The sampled data from the sensor is first traced into the random access memory (RAM), and write access to the flash memory is delayed until the page buffer of the on-chip flash memory controller in the micro controller unit (MCU) is full of the numbers of the traced data, thereby reducing the frequency of accessing flash memory. This technique additionally reduces power consumption by 40% compared to flash-write all data. By sharing the sampling information via LoRa channel, the overhead in sampling data is distributed, to reduce the sampling load on each node, so that the 66% reduction of total power consumption is achieved in several IoT edge nodes by removing the sampling operation of duplicated data.