• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.277-297
• /
• 2014

Since the isolation bearings undergo large displacements in base-isolated structures, impact with adjacent structures is inevitable. Therefore, in this investigation, the effect of impact on seismic response of isolated structures mounted on double concave friction pendulum (DCFP) bearings subjected to near field ground motions is considered. A non-linear viscoelastic model of collision is used to simulate structural pounding more accurately. 2-, 4- and 8-story base-isolated buildings adjacent to fixed-base structures are modeled and the coupled differential equations of motion related to these isolated systems are solved in the MATLAB environment using the SIMULINK toolbox. The variation of seismic responses such as base shear, displacement in the isolation system and superstructure (top floor) is computed to study the impact condition. Also, the effects of variation of system parameters: isolation period, superstructure period, size of seismic gap between two structures, radius of curvature of the sliding surface and friction coefficient of isolator are contemplated in this study. It is concluded that the normalized base shear, bearing and top floor displacement increase due to impact with adjacent structure. When the distance between two structures decreases, the base shear and displacement increase comparing to no impact condition. Besides, the increase in friction coefficient difference also causes the normalized base shear and displacement in isolation system and superstructure increase in comparison with bi-linear hysteretic behavior of base isolation system. Totally, the comparison of results indicates that the changes in values of friction coefficient have more significant effects on 2-story building than 4- and 8-story buildings.

• 한국측량학회지
• /
• 제39권3호
• /
• pp.157-165
• /
• 2021

최근 위성영상, 항공사진 등의 해상도가 향상됨에 따라 고해상도 원격탐사 자료를 이용한 다양한 연구가 진행되고 있다. 특히, 국토 전역의 건물객체 추출은 수치지도 레이어 및 주제도 작성에 필수적이기 때문에 높은 정확도가 요구된다. 본 연구에서는 딥러닝의 영상처리 기법 중 의미론적 분할에 사용되는 대표적인 모델인 SegNet, U-Net, FC-DenseNet, HRNetV2를 이용하여 건물객체 추출 모델을 생성하고, 이에 따른 모델의 평가를 수행하였다. 학습자료는 다양한 건물들로 이루어진 영상을 이용하여 생성하였고, 평가는 세 지역에 나누어서 진행하였다. 먼저 학습자료와 인접한 지역을 통해 모델의 성능을 평가하였고, 이후 학습자료와 상이한 지역을 통해 모델의 적용성을 평가하였다. 그 결과 HRNetV2 모델이 건물객체 추출의 성능과 적용성 면에서 가장 우수한 결과를 보였다. 본 연구를 통해 수치지도 내 건물레이어 생성 및 수정의 가능성을 확인하였다.

• 한국환경생태학회지
• /
• 제34권5호
• /
• pp.466-482
• /
• 2020

본 연구는 도로에서 발생하는 미세먼지 농도가 도시 개발 형태에 따라 인접 생활권별로 어떻게 확산되는지 시뮬레이션을 통해 파악하고자 하였다. 연구는 경상남도 밀양시청 앞 6차선 도로를 중심으로 한 도로영향권 시가지를 대상으로 진행하였다. 시뮬레이션 프로그램인 ENVI-met 모델을 가로녹지 유무, 도로변 건축물의 높이에 따라 변수를 조정하여 미세먼지 농도의 확산정도를 파악하였다. 모델링 결과 도로변 건물이 고층으로 형성되어 있고 가로녹지가 조성되어 있는 경우 인접 생활권으로 확산된 미세먼지 농도가 가장 낮았으며, 다음으로는 고층건물군에 가로녹지가 없는 상태의 농도가 낮았다. 반면 저층건물군이 형성된 경우에는 가로녹지 유무에 관계없이 인접생활권으로 확산된 미세먼지 농도는 높게 나타났다. 고층건물의 경우 빌딩풍에 의해 건축물 주변으로 강한 바람이 형성되는 만큼 바람에 의해 미세먼지가 빠르게 외부로 확산되어 농도가 낮아지는 것으로 확인할 수 있었다. 반면 가로녹지 조성이 도로변 생활권에 미치는 미세먼지 저감효과는 뚜렷하지 않았다. 특히 도로변 건축물이 저층일 경우 가로녹지를 조성과 생활권미세먼지농도변화와 관련성은 없는 것으로 확인되었다. 본 연구는 미세먼지가 도로에서만 발생하는 것을 가정하여 모델링을 진행한 것으로 향후 다양한 변수에 따른 미세먼지 확산모형 연구 및 현장연구의 보완을 필요로 하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.463-467
• /
• 2006

Several segmentation algorithms have been proposed for DTM generation or building modeling from airborne LiDAR data. Three components are important for accurate segmentation: (i) the adjacent relationship of n-nearest points or mesh, etc. (ii) the effective decision parameters of height, slope, curvature, and plane condition, (iii) grouping methods. In this paper, we created the topology of point cloud data using the contour tree and implemented the region-growing Terrain and non-terrain points were classified correctly in the segmented data, which can be used also for feature classification.

• 기술사
• /
• 제33권2호
• /
• pp.12-17
• /
• 2000

The rebuilt and redevelopment projects conducted these days surely have invited overpopulation. Its one of the culprits is the municipal ordinances which allow the floor to site area ratio to increase from 200% to 400% in a decade and the adjacent distance ratio from 1.25 to 0.8 times of height of building. Possible solutions for the overpopulation problem are as below. - The floor to site area ratio should be regulated adaptively according to various regional localities. - Draw back the capital gains coming from a rebuilding project For evaluation process; - Select a suitable plan from plurality of proposals - Gradually encourage projects towards remodeling system in the near future

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.981-994
• /
• 2016

Two field research stations based upon atmospheric corrosivity monitoring combined with reinforced concrete corrosion rate sensors have been established in Kuwait. This was established for the purpose of remote monitoring of building materials performance for concrete under Kuwait atmospheric environment. The two field research sites for concrete have been based upon an outcome from a research investigation intended for monitoring the atmospheric corrosivity from weathering station distributed in eight areas, and in different regions in Kuwait. Data on corrosivity measurements are essential for the development of specification of an optimized corrosion resistance system for reinforced concrete manufactured products. This study aims to optimize, characterize, and utilize long-term concrete structural health monitoring through on line corrosion measurement and to determine the feasibility and viability of the integrated anode ladder corrosion sensors embedded in concrete. The atmospheric corrosivity categories supported with GSM remote data acquisition system from eight corrosion monitoring stations at different regions in Kuwait are being classified according to standard ISO 9223. The two nominated field sites where based upon time of wetness and bimetallic corrosion rate from atmospheric data where metals and rebar's concrete are likely to be used. Eight concrete blocks with embeddable anodic ladder corrosion sensors were placed in the atmospheric zone adjacent to the sea shore at KISR site. The anodic ladder corrosion rate sensors for concrete were installed to provide an early warning system on prediction of the corrosion propagation and on developing new insights on the long-term durability performance and repair of concrete structures to lower labor cost. The results show the atmospheric corrosivity data of the environment and the feasibility of data retrieval of the corrosion potential of concrete from the embeddable sets of anodic ladder corrosion sensors.

• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.311-321
• /
• 2021

Perception of the public to structural fires is very important because there are only a number of tall timber buildings constructed in the world. People are hesitating to accept tall timber buildings, so it is essential to ensure the first generation of tall timber buildings to a very high standard, especially fire safety. Right now, there are no specific design standards or regulations for fire design of tall timber buildings in Europe. Even though heavy timber members have better fire resistance than steel components, many conditions still need to be verified before considering the use of timber materials, e.g. fire spread, post-fire collapse, etc. This research numerically explores the structural behaviours of a tall Glulam building when one of its internal Glulam (Glued laminated timber) columns fails after sustaining a full 120-min standard fire and is removed from the established finite element building model created in SAP2000. The numerical results demonstrate that the failure and removal of the selected internal Glulam column may lead to the local failure of the adjacent CLT (Cross laminated timber) floor slabs, but will not lead to large disproportionate damage and collapse of the whole building. Here, the building is assumed to be located in Glasgow, Scotland, UK.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.177-178
• /
• 2015

Various vibration caused by construction vehicles and equipment movement, rock blasting, and crushing obstacle occurs inevitably in construction sites. In this study, we measured the impact of vibration by blasting rock at construction sites, rock crushing, concrete crushing. The measuring instrument was installed in adjacent buildings and observed that blasting vibration differs depending on the charge weight, blasting distance, and the measuring position. The observation was maintained by allowable peak particle velocity standard according to each standards and references.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.772-775
• /
• 2005

Most engineers, related to soil and civil dynamic field, have been interested in the direct dynamic design of building transmitted from soil and rock to structure due to blasting. However it is not easy to estimate the dynamic response of structures due to blasting by using analytical method because of difficulties of soil modeling, prediction of excitation force and so on. In this paper, dynamic analysis have been performed to predict vibration level and evaluate dynamic safety of structure adjacent to tunnel blast and the semi empirical method, which is based on vibration measurement data, has been employed to consider blast vibration characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.578-581
• /
• 2007

In this study, the seismic control performance of energy dissipation devices installed in a shear all-frame structure is investigated through nonlinear time history analysis of a 12-story building. Inelastic shear walls are modeled using the multiple vertical line element model (MVLEM) and inelastic columns and girders were modeled using fiber beam elements. For a seismic load increased by 38% compared to the design load, the seismic control performance was analyzed based on the results of a nonlinear time history analysis in terms of the inter-story drift, the story shear and the flexural strain. Friction type dampers was found to performs best if they are installed in the form of a brace adjacent to the shear wall with the friction force of 15 % of the maximum story shear force induced in the original building structure without dampers.