• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.166-173
• /
• 1998

The evaluation of joint fatigue strength of light weight materials for an electrical vehicle body has been performed through T-peel joint tests with the design parameters such as joint style, adherend type, adherend thickness, adhesive thickness, and various adhesives. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the zero stress ratio. It was observed that the fatigue strength of the joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the fatigue strength of the joint increases insignificantly. An aluminum-FRP adherend combination shows much higher fatigue strength than an aluminum-aluminum adherend combination. The results of fatigue tests were found to be consistent with those of static tests.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.252-253
• /
• 2021

In this study, butyl rubber, which is the main material constituting the self-adhesive butyl rubber waterproofing sheet, was mixed with reclaimed rubber, and tensile strength, tear strength, peeling resistance strength, and adhesion strength were measured for sample prepared by mixing ratio. As a result, it was confirmed that peeling resistance strength and adhesion strength decreased as the reclaimed rubber content increased, and tensile strength and tear strength did not change significantly.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.1-8
• /
• 2019

금속, 세라믹스, 플라스틱 등 고체의 표면에 적용되는 접착제와 페인트 도장막의 수요와 중요성은 점점 증가하고 있다. 본 연구에서는 금속 피착재에 고분자 재료인 접착제 혹은 페인트 도장막을 적용할 때, 이들 고분자 코팅층과 금속 피착재 사이의 접착강도 측정시 영향인자에 대한 연구를 돌리테스트로 수행하였다. 접착제로는 2액형 에폭시 접착제가 사용되었으며, 페인트로는 방청용 2액형 에폭시 페인트인 EH2350가 사용되었다. 특히, 영향인자로는 피착재의 종류(Al, Fe, STS, Cu, Zn), 표면거칠기 및 표면오염(수돗물, 소금물) 등을 선택해서 접착강도에 미치는 영향에 대해 연구하였다. 접착제와 피착재의 접착강도는 동일한 접착제를 사용해도 피착재의 종류가 달라지면 다르게 나타났으며, 수돗물 혹은 소금물로 산화 오염된 피착재의 표면은 페인트 도장공정 이전에 수돗물로 스프레이 세척이 필수적임을 알았다. 본 연구의 결과로 돌리테스트는 도장막과 피착재의 접착강도를 측정하는데 향후 널리 사용될 수 있음을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.613-617
• /
• 1998

This study deals with the effect on adhesive strength properties of fiber sheet layer and maintenance position of coccrete structure reinforced using epoxy resin carbon and aramit fiber sheet. Properties of epoxy resin adhesive strength of the concrete bridge slab, tunnel and wall etc. reinforced using fiber sheet under many different environment change according to condition of concrete substrate, temperature, moisture, curing, cleaning, and chemical effects and so on. The purpose of this study is that it makes the estimation value of adhesive strength of concrete substrate and fiber sheet reinforcing layer penetrated epoxy resin under high temperature(9$0^{\circ}C$), chemical attack and condition of curing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.505-508
• /
• 2006

Self-leveling mortar is walkable bottom mortar which can maintain the horizontality of self fluid and have the the quick-setting quality, the low-human-effort practicable material of high-quality bottom in construction. In accordance with more adhesive strength with bottom side and absorption control, Primer is used for purpose to prevent pin-hole occurrence by self leveling mortar application prior to construction. This study is composed measurement of absorption, adhesive strength. Used material is NP-40 as nonionic emulsifying agent, uses SA-210L as negative ion emulsifying agent, uses APS, SBS as ridical initiator. A result of test, in accordance with image of Primer, as low temperature and application frequency, indicates low absorption rate and adhesive strength, as solid powder and dryness time is increse, absorption rate and adhesive strength lowly shows figure.

• 한국안전학회지
• /
• 제24권3호
• /
• pp.7-12
• /
• 2009

The tensile and fatigue experiments were conducted with tensile-peel specimens for investigating on strength of adhesively bonded and mechanical press joints of aluminum sheet used in the field of the automobile industry. The combining epoxy adhesive bonding and mechanical press joining exhibits an increase in joining force as a result of interaction between static forces of the two joining methods. The fatigue strength of pure adhesive joint was measured as 91% of that of the combination of adhesive bond and mechanical press joint, suggesting that the interaction between the bonding and mechanical joining was about 9%.

• 한국염색가공학회지
• /
• 제16권3호
• /
• pp.14-21
• /
• 2004

In this research, we accomplished in order to improving color fastness of sublimation for Poly (vinyl alcohol) (PVA)-iodine polarized film. The poor iodine sublimation problem has greatly improved by $O_2$ low temperature plasma treatment. We obtained the followings: (1) plasma treatment has contributed in adhesive ability via peel strength, AFM image and roughness were investigated, But the improvement in adhesive strength was not linearly proportional to the treatment time. (2) $O_2$ plasma treated PVA-iodine polarized film was good enough as to maintain the transmittance and polarization even after iodine cone. of 0.05mol/L and dipping time of 50sec. (3) $O_2$ low temperature plasma treated PVA-iodine polarized film has obtain high durability because of good adhesive strength.

• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.115-120
• /
• 2007

The adhesive performance of marine mussel extract was compared with that of the commercial medical adhesives for fastening biotissue (SIS) bandages. Joints bonded with mussel extract showed stronger strength than those bonded with other commercial adhesives. The bonding strength was much improved when the moisture in the Joint was reduced using superporous hydrogel regardless of curing time under humid condition ($37^{\circ}C$ and 91% relative humidity). Water inflow into the SIS joint seemed to degrade the performance of mussel extracts adhesive especially for the joints of short period of curing time. The strength of SIS joints coated with surgical sealant was well maintained after being exposed to water inflow.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1089-1096
• /
• 2005

This study was experimental test of edgewise compression properties for aluminum(type-50XX) sandwich panel with thermal environment and surface treatment using adhesive film. There was decreasing $10\%-peel$ strength after thermal environment. Through compressive. buckling mode know to seen of properties of adhesive, sheet and core strength. First case of Chromate to aluminum sheet, know low shear strength of adhesive through buckling mode but case of Beomite to aluminum sheet, know than thin sheet and core low strength through buckling mode.

• 대한금속재료학회지
• /
• 제49권11호
• /
• pp.831-838
• /
• 2011

Effects of spangle size and crystallographic characteristics on the surface appearance, galling properties, and adhesive strength of hot-dip galvanized steel sheets have been investigated. Both spangle size and crystallographic orientation measured by optical microscopy, scanning electron microscopy, and X-ray diffraction were identified as critical factors influencing the galvanized coating performance. By decreasing the spangle size, surface appearance and galling properties related to the friction coefficient were significantly improved. However, low temperature adhesive-strength with small spangle galvanized steel sheets showed lower values compared to commercially used galvanized coating. The variation of adhesive strength in terms of spangle size has been clarified.