• 전산구조공학
• /
• 제10권2호
• /
• pp.131-138
• /
• 1997

이 논문에서는, 균일한 횡방향 인장변형률이 작용하는 조건에서 강체모재들을 결합하고 있는 점탄성 접착재층의 계면모서리에 발생하는 응력 특이성을 조사하고있다. Williams방법을 응용하여 라플라스 변형공간에서 특성방정식을 구하였고, 주어진 점탄성 모델에 대해서 변형공간에서의 특성방정식을 시간공간으로 해석적으로 전환하였다. 시간 공간에서의 특이차수는 수치적으로 계산하였다. 계면을 따라 발생하는 응력의 특성을 조사하는데 시간영역 경계요소법을 적용하였다. 수치해석 결과에 의하면, 특이차수는 시간이 경과함에 따라 커지는 반면에, 자유모서리 응력확대계수는 시간에 따라 이완되는 특성을 보여주고 있다.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.41-48
• /
• 1998

This study was aimed at development of fabrication process of functionally graded materials(FGM), consisting of metal and ceramic by thermal spraying method. NiCrAIY/$Al_2O_3$ FGM were made by using plasma spraying onto the SS400 carbon steel substrate. And mechanical properties such as microhardness, thermal shock resistance and adhesive strength of the coating layer were investigated. Adhesive strength was evaluated by acoustic emission method. It was resulted that NiCrAIY/$Al_2O_3$ FGM made by thermal spraying method showed excellent thermal shock resistance and adhesive strength compared to the other lamellar structures of sprayed coatings and that AE is useful tool to evaluate the defect of thermal sprayed coating layer.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2000-2006
• /
• 2000

The enhancement of service life of damaged or cracked structures is currently major issue to the researchers and engineers. In order to improve the life of cracked aging aircraft structures, the repair technique which uses adhesively bonded boron/epoxy composite patches is being widely considered as a cost-effective and reliable method. This paper is to study the performance of the bonded composite patch repair of a plate containing an inclined central through-crack. A 3-dimensional finite element method having three layers to the cracked plate, composite patch and adhesive layer, is used to compute the stress intensity factor. In this paper, the reduction of stress intensity factors near the crack-tip are determined to evaluate the effects of various non-dimensional design parameter including composite patch thickness, and material properties of the composite patch and thickness of the adhesive layer, materials of patch etc., and the crack length, Finally, The problem of how to optimize the patch geometric configurations has been discussed.

• Structural Engineering and Mechanics
• /
• 제59권1호
• /
• pp.83-100
• /
• 2016

In this paper, the problem of interfacial stresses in steel beams strengthened with a fiber reinforced polymer plates is analyzed using linear elastic theory. The analysis is based on the deformation compatibility approach developed by Tounsi (2006) where both the shear and normal stresses are assumed to be invariant across the adhesive layer thickness. The analysis provides efficient calculations for both shear and normal interfacial stresses in steel beams strengthened with composite plates, and accounts for various effects of Poisson's ratio and Young's modulus of adhesive. Such interfacial stresses play a fundamental role in the mechanics of plated beams, because they can produce a sudden and premature failure. The analysis is based on equilibrium and deformations compatibility approach developed by Tounsi (2006). In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both the steel beam and bonded plate. The paper is concluded with a summary and recommendations for the design of the strengthened beam.

• 한국재료학회지
• /
• 제32권10호
• /
• pp.442-447
• /
• 2022

Sealing treatment is a post-surface treatment of the plasma spray coating process to improve the corrosion resistance of the coating material. In this study, the effect of the sealing on the corrosion resistance and adhesive strength of the plasma spray-coated alumina coatings was analyzed. For sealing, an epoxy resin was applied to the surface of the coated specimen using a brush. The coated specimen was subjected to a salt spray test for up to 48 hours and microstructural analysis revealed that corrosion in the coating layer/base material interface was suppressed due to the resin sealing. Measurement of the adhesive strength of the specimens subjected to the salt spray test indicated that the adhesive strength of the sealed specimens remained higher than that of the unsealed specimens. In conclusion, the resin sealing treatment for the plasma spray-coated alumina coatings is an effective method for suppressing corrosion in the coating layer/base material interface and maintaining high adhesive strength.

• Applied Microscopy
• /
• 제52권
• /
• pp.6.1-6.5
• /
• 2022

We examined the morphology of the fertilized egg and the fine structure of fertilized egg envelopes of Poropanchax normani belonging to the family Poeciliidae, also known as Norman's lampeye using light and electron microscopes. The fertilized eggs with narrow perivitelline space were found to be spherical and demersal, additionally containing small oil droplets in the vitelline membrane. Further, a bundle of adhesive filaments was observed to be present on one side of the fertilized egg. These filaments possessed remarkably high elasticity and were approximately 1-3mm in length. The size of the fertilized egg was determined to be about 1.49 ± 0.07mm (n=30). The outer surface appeared smooth, and adhesive filaments originating at different location of the surface of the envelope were found to be distributed around the egg envelope and were joined together to form a single long bundle in scanning electron microscopic observation. A peak-like structure formed of several straight wrinkles was observed around the micropyle. However, the complete structure of the micropyle could not be studied due to the depth at which it was located. Additionally, the total thickness of the egg envelope was ascertained to be approximately12.5-14.5㎛. The egg envelope consisted of two distinct layers, an outer electron dense layer and an inner lamellar layer, further consisting of 10 sublayers of varying thicknesses. Collectively, it was observed that the morphological characteristics of the fertilized egg, fine structures surrounding the micropyle, outer surface, adhesive structure consisting adhesive filaments, and sections of fertilized egg envelope displayed species specificity.

• 폴리머
• /
• 제33권6호
• /
• pp.525-529
• /
• 2009

우수한 성능의 2층 연성동박적층판(이하 FCCL)을 제조하기 위해서는 동박과 폴리이미드 사이에서 높은 접착력이 요구된다. 이를 위해 이종 재료로 인한 두 계면 사이의 접착력을 향상시키기 위해서는 일반적으로 기능성 실란커플링제가 사용된다. 본 연구에서는 압연동박과 폴리이미드 사이의 접착력 향상과 이미드화를 위한 고온의 열처리 조건에서도 안정한 새로운 형태의 실란커플링제를 합성하였다. 또한, 합성된 실란커플링제를 압연동박에 처리하였을 때, 표면처리제의 농도에 따른 표면변화를 관찰하였으며, 이로 인해 발생되는 접착력 변화를 확인하기 위해서 2층 FCCL을 제조하여 $90^{\circ}$ peel test를 통해 관찰하였다. 그리고, 두 종류의 폴리이미드를 이용한 FCCL에서 실란 커플링제가 접착력에 미치는 영향을 확인하였다.

• 폴리머
• /
• 제35권4호
• /
• pp.302-307
• /
• 2011

실란 커플링제의 가수분해를 통한 실란올의 형성과 올리고머 구조형성을 하는 중합반응은 2-FCCL의 표면처리 과정에서 계면 사이의 접착력에 영향을 준다. 본 연구에서는 설란 커플링제의 가수분해반응 속도를 비교하고 표면처리 후 동박의 표면 에너지로 인한 접착특정의 변화를 확인하였다. 특히 이성분계 살란 커플링제는 가수분해 반응속도 조절이 기능하며, 동박과 폴리이미드 사이에서 접착 프로모터로서 확실한 접착력 향상을 보였다. 압연동박 표면에 처리한 이성분계 실란 커플링제의 함량 변화에 띠라 접착력의 향상 정도가 다르게 나타났으며 반응속도 조절과 표면 에너지 평가를 통한 접착 특성을 분석해 접착력을 최대화시켰다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.196-201
• /
• 2004

Adhesive joints have been widely used for fastening thin adherends because they can distribute the load over a larger area than mechanical joints, require no hole, add very little weight to the structure and have superior fatigue resistance. However, the fatigue characteristics of adhesive joints are much affected by applied pressure during curing operation because actual curing temperature is changed by applied pressure and the adhesion characteristics of adhesives are very sensitive to manufacturing conditions. In this study, cure monitoring and torsional fatigue tests of adhesive joints with an epoxy adhesive were performed in order to investigate the effects of the applied pressure during curing operation. From the experiments, it was found that the actual curing temperature increased as the applied pressure increased, which increased residual thermal stress in the adhesive layer. Therefore, the fatigue life decreased as the applied pressure increased because the mean stress during fatigue tests increased due to the residual thermal stress.

• Restorative Dentistry and Endodontics
• /
• 제34권1호
• /
• pp.51-60
• /
• 2009

본 연구는 현재 시판 되고 있는 여러 개의 상아질 접착제를 임상 술식에서와 같은 방법으로 사용한 다음 열순환 후 접착계면의 변화를 관찰 비교하고자 했다. 발거 한지 한 달 이내인 대구치 28개의 교합면 상아질 표면에 4종의 상아질 접착제 (OptiBond FL [OP], AdheSE [AD], Clearfil SE Bond [CL], Xeno III [XE]) 중 하나를 적용한 뒤 복합 레진 (Premisa, Kerr) 을 1 mm 두께로 올린 후 광중합 하였다. $4^{\circ}C$ 증류수에서 6일간 보관한 뒤, 치아의 정중선으로부터 수직으로 절단 하여 그 중 절반의 치아에서 2 mm 두께의 시편을 얻은 다음 남은 반쪽의 치아는 10,000회의 열순환을 가한 뒤 ($5^{\circ}-55^{\circ}$, 침지 시간 25초, 대기 시간 5초) 같은 방법으로 2 mm 두께의 시편을 얻었다. 연마한 시편을 24시간 동안 50% ammoniacal silver nitrate solution에 담근 다음 photo-developing solution에서 8시간 동안 환원시켰다. 계면을 가로지르는 5개의 line상에서 wavelength dispersive spectrometry (WDS) detector를 이용하여 주사전상에 있는 원소들의 중량비를 계산하였다. 또한 열순환 전과 후의 시편에서 얻어진 5개의 silver 측정치를 서로 비교하였다. 열순환 전의 접착제층(adhesive layer)에서는 OP에서 가장 적은 silver의 투과가 관찰되었으며 (p < 0.0001), CL, AD, XE 순으로 투과 량이 증가함을 보였다. 혼성층 (Hybrid layer) 에서는 CL의 투과량이 가장 적었다 (p = 0.0039). 열순환 후에 접착제층과 혼성층에서 silver의 투과량은 증가하지는 않았다. Scanning electron microscopy (SEM) 사진을 통하여 각 시편의 접착 계면에서 접착제에 따른 특이적인 silver의 투과상을 관찰할 수 있었다. 전반적으로 OP 와 CL의 접착계면이 열순환 과정 중에도 온전히 유지됨을 볼 수 있었다. 접착 계면에서의 수분 투과 양상은 각 접착제에 따라 다른 형태를 보였으며 열 순환에 의해 유의할 만한 변화를 야기하지는 않았다.