• 접착 및 계면
• /
• 제11권1호
• /
• pp.9-14
• /
• 2010

유화제로 UNIQ-1 (isopropylamine alkyl aryl sulphonate)과 UNIQ-2 (alkoxylated glycol ether)를 혼합사용 하고, 오일 상으로 도료용 수지로 사용되는 유장 45% 알키드 수지를 사용하여 전상유화법으로 o/w 에멀젼을 제조하였다. 에멀젼 제조과정에서 HLB, 교반속도, 제조 온도가 입자크기에 미치는 영향을 조사하였으며, 입자크기는 HLB 값의 영향을 크게 받는 것으로 나타났다. 또한, 저장온도 및 자연광에 대한 안정성을 평가하였다. 최종적으로 제조된 에멀젼의 평균 입자 크기는 193 nm 이었으며, 기존 유성 수지에 비해 VOC 사용량을 90% 절감하였다.

• 공업화학
• /
• 제31권1호
• /
• pp.67-72
• /
• 2020

Biomaterials are frequently functionalized with Arg-Gly-Asp (RGD) peptides to provide cell adhesion sites. In this study, RGD peptides were enzymatically coupled on to the surface of fibroin microspheres. Papain exhibited a strong preference for dansyl phenylalanine for the peptide formation with fibroin microspheres. Thus, RGD1 peptide was designed to carry cysteine to both sides of the sequence, glycine as a spacer and two residues of phenylalanine at the C-terminal (CRGDCGFF). The enzymatic modification facilitated by an increasing amount of substrate and by the presence of organic solvent, dimethylsulfoxide at 25% (v/v). Microspheres coupled with RGD1, showed a significantly different precipitation property and an increased apparent volume, possibly due to the steric hindrance of RGD peptides on the surface. Transmission electron microscopy also confirmed the presence of cysteine residues in RGD1 coupled on the surface of microspheres stained with gold nanoparticles. RGD1-microspheres significantly facilitated the growth of murine fibroblast 3T3 cells even under non-adhesion culture conditions.

• Journal of Applied Biological Chemistry
• /
• 제58권1호
• /
• pp.89-95
• /
• 2015

Helicobacter pylori infection causes gastrointestinal diseases such as chronic gastritis, peptic ulcers, and may lead to gastric cancer. Several studies have reported that lactobacilli present on broccoli show inhibitory activity against H. pylori. Here, we evaluated aqueous broccoli, fermented by Lactobacillus plantarum MG208, for its fermentation characteristics and anti-H. pylori activities including antibacterial activity, growth inhibition, anti-adhesion, and urease inhibition. The results indicated that the fermentation characteristics changed significantly depending on the amount of aqueous broccoli used for fermentation (p <0.05). There was no significant difference between the samples before fermentation (p >0.05). However, a significant concentration-dependent difference was noted in antibacterial activity and urease inhibition (p <0.05) following the addition of aqueous broccoli. Growth inhibition in the 10 mg/mL sample was significantly higher as compared to the negative control and similar to that with amoxicillin (positive control) (p <0.05). Anti-adhesion activity of aqueous broccoli was also significantly different (p <0.05) from the negative control. Therefore, aqueous broccoli fermented by L. plantarum MG208 could prove useful as a functional diet for protection of the gastric environment against H. pylori infection.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.576-580
• /
• 2018

In this study, a small amount of CoO was added to commercial Gd-doped $CeO_2$ (GDC) powder. The CoO addition greatly enhanced sinterability at low temperatures, i.e., more than 98% of relative density was achieved at $1,000^{\circ}C$. When GDC/8YSZ (8 mol% yttrium stabilized zirconia) bilayers were sintered, Co-doped GDC showed excellent adhesion to the YSZ electrolyte. Transmission electron microscope (TEM) analysis showed that there were no traces of liquid films at the grain boundaries of GDC, whereas liquid films were observed in the Co-doped GDC sample. Because liquid films facilitate particle rearrangement and migration during sintering, mechanical stresses at the interface of a bilayer, which are developed based on different densification rates between the layers, might be reduced. In spite of $Co^{2+}$ doping in GDC, the electrical conductivity was not significantly changed, relative to GDC.

• 한국초전도ㆍ저온공학회논문지
• /
• 제5권1호
• /
• pp.13-16
• /
• 2003

Adhesion of $SrZrO_3$ resistive oxide barrier on Ag sheathed Bi(2223) tapes prepared by the sol-gel and dip-coating method was evaluated with an aid of Taguchi method and Lie($2^1{\times}3^7$) orthogonal arrays to determine the optimal process combination of levels of factors that best satisfy the bigger is better quality characteristic (QC=B). For analyses of results statistical calculations such as average and analysis of variance (ANOVA) were employed to analyze the results for improving the performance qualities of the dip-coated $SrZrO_3$ film. Experimentally, the performance of the films was evaluated in terms of bond strength by varying Sr/Zr moi ratio (A), amount of organic vehicle additives (B), drying temperature (C) and time (D), heat treatment temperature (E) and time (F), respectively. The optimal combination of levels of factors was determined to be $A_3B_2C_3D_2E_1F_3$ having a 90% confidence level.

• Journal of Pharmaceutical Investigation
• /
• 제29권2호
• /
• pp.127-136
• /
• 1999

In order to eliminate demerits of conventional dosage forms, dipotassium glycyrrhizate was formulated as a slim mucoadhesive film type dosage form. The mucoadhesive drug layer gel containing dipotassium glycyrrhizate was prepared using $Noveon^{\circledR}$ AA-1, hydroxypropylcellulose-M, ethylcellulose N 100 and citric acid, and the protective layer gel by using ethylcellulose N 100, $Eudragit^{\circledR}$ RS and castor oil. The viscosity of drug layer gel of mucoadhesive film was enhanced as the increased amount of $Noveon^{\circledR}$ AA-1 or hydroxypropyl cellulose-M. The drug content was unifonnly $1160{\pm}14.6\;{\mu}g$, and was varied within 3.5%. The optimum film dosage form showed a good fluidity and malleability of drug layer, with 179 g of thickness, pH 5.7, 411 min of in vitro adhesion time and 172 g in gravity adhesive strength. The release time of drug from the mucoadhesive film was significantly shorter but was delayed when polymers such as ethylcellulose was added. From these results, the new mucoadhesive film may be effective for the treatment of aphthous stomatitis.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.66.2-66.2
• /
• 2011

A polymer-based multi-walled carbon nanotube (MWCNT) field emission device was fabricated from a composite dispersion of MWCNTs and waterborne polymethyl methacrylate (PMMA). The waterborne PMMA synthesized through the emulsion polymerization method was added to minimize the reagglomeration of dispersed MWCNTs with surfactants in water, and increase the adhesion between the and the substrate. The field emission properties of the fabricated device were optimized by adjusting the density of the emitter and the adhesion between the MWCNTs and the substrate. These were done by controlling the polymer concentration added to the MWCNT dispersion, as well as the amount of spray coating on the substrate. The results confirm the successful fabrication of a polymer-based MWCNT field emission device with a low field of 1.07 $V/{\mu}m$ and a good electric field enhancement factor of 2445. The device was fabricated by adding 0.8 mg/mL of polymer solution to the MWCNT dispersion and applying 20 cycles of spray coating. Application of this same MWCNT/polymer composite solution to a flexible polymer substrate also resulted in the successful fabrication of an electric field emission device with uniform emission and long time stability.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.607-615
• /
• 2015

To investigate the adhesion effect of various kinds and contents of polymeric methylene diphenyl diisocyanates (pMDIs) on adhesion performance, wood adhesives (A-1~5) were synthesized and characterized. As results, when the amount of pMDI increased in adhesives, the dry tensile strength was found to be proportionally increased sustaining at around $16.0{\sim}21.6kgf/cm^2$. The polyurethane (PU) resin, which used M11S as a source of pMDI showed the best wet tensile strength at $11.9kgf/cm^2$ and cyclic boil tensile strength at $8.1kgf/cm^2$, which satisfied the requirement of over $7kgf/cm^2$. Thermal properties of the rice powder (RP) based polyurethane resins were characterized by differential scanning calorimetry (DSC) and Thermal gravimetric analysis (TGA). Thermal stability of polyurethane resins increased to $250^{\circ}C$ with adding pMDIs. The more pMDI (M5S) was added to adhesive, the higher thermal stability of the resin was observed by TGA.

• 분석과학
• /
• 제27권5호
• /
• pp.228-233
• /
• 2014

전기방사된 나노섬유는 구조 및 비교적 손쉬운 제조공정으로 의료용 재료분야의 활용이 늘어나고 있다. 제조된 나노섬유는 블럭공중합체의 PCL-PEG diamin block copolymer의 혼합 비가 높을수록 말단에 결합된 아민기의 비가 높아진다. 생분해성 고분자인 폴리카프로락톤(Poly(e-caprolactone,PCL)과 폴리카프로락톤-폴리에틸렌글리콜-아민(Poly(e-caprolactone)-Poly(ethylen glycol-$NH_2$))의 블럭공중합체를 혼합한 비율을 조절하여 전기방사법으로 방사함으로써, 세포와의 친화도를 조절하였다. PEG and amine의 비율과 콜라겐의 영향으로 손상된 세포의 성장을 촉진시키는 효과를 기대할 수 있는 생분해성 복합 나노섬유를 제작 및 특성 분석하였다.

• Elastomers and Composites
• /
• 제49권3호
• /
• pp.245-252
• /
• 2014

폴리올, 이소시아네이트, 2-HEMA 및 기타 아크릴레이트 단량체들로부터 제조된 폴리우레탄 접착제의 FT-IR측정과 물성을 검토하였다. 폴리우레탄 접착제의 연화점, 점도, 접착강도 및 기계적 물성들이 각각 링과볼법, Brookfield 점도계 및 만능시험기를 이용하여 검토되었다. 실험 결과에 의하면 PPG 함량 및 부틸아크릴레이트 함량이 증가함에 따라 연화점, 접착강도, 인장강도 및 100% modulus 값 등은 감소하는 것을 보여준다. 하지만 2-HEMA 및 MDI량이 증가할수록 인장강도 및 100% modulus값 등은 증가하였으며 점도와 NCO함량 등도 또한 증가하였다.