• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.46-53
• /
• 2014

An automatic grease lubricator provides an adequate amount of fresh grease constantly to any type of rotating machine to minimize friction heat and reduce friction loss. This study seeks to develop an automatic grease lubricator by means of rapid prototyping with a gear-driven mechanism and a controlled operation time. The ultimate design is to lubricate an adequate amount of grease by a simple dip-switch clicking mechanism according to an advanced set cycle. The backlash of the gear was minimized to increase the power, and to increase the power of the mechanism, the binding frequency and the thickness of the coil were changed. To control the rotation cycles of the main shaft according to certain set numbers, different resistances and chips were used in the design of the circuit which controls the electrical signals via a pulse. A digital mock-up was analyzed and the rapid prototyping (RP) trial products were tested with a PCB circuit and grease. An evaluation of the outlet capacity of RP trial products was conducted, as the friction caused by the outlet on the wall surface was an important factor in the operation of the equipment. Finally, a finishing process was applied to decrease the roughness of a surface to a comparable level to test the performance of the product.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• Journal of Nutrition and Health
• /
• v.30 no.7
• /
• pp.813-824
• /
• 1997

This study was designed to investigate the effect of dietary calcium and phosphate levels on calcium and bone metabolism in rats. The rats were divided into six groups and each of the groups was fed diets with different Ca/P ratios. The experimental periods were 5 weeks . There was no significant different difference in dietary intake, body weight gain, and organ weight among the groups with different calcium and phosphate intake levels. Fecal calcium excretion was not significantly different among the groups, but urinary calcium excretion was increased by the increase in Ca/P ratio. Fecal phosphate excretion was not different but urinary phosphate excretion was increased by the increase in dietary phosphate intake. There was no significant difference in serum alkaline phophatase activity and urinary hydroxyproline levels were not significantly different among the groups. The low calcium-high phosphate(0.25Ca-1.2% P) group showed the lowest total calcium content in femur and scapula. This may be due to it having the lowest Ca/P ratio among groups. The low calcium-high phosphate(0.2%Ca-1.2%P) group showed that mandible is almost lost and osteolyzed Harversian canal was expanded in femur. Results suggest that phosphate intake affects calcium and bone metabolism more with inadequate calcium nutrition that with adequate calcium intake. Thus , for normal bone growth and metabolism , adequate calcium intake and/or high Ca/P ratio are important.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.93-101
• /
• 2021

The purpose of this study is to analyze the adequacy of production capacity of the assembly process system of mobile bath vehicle's top box panel and process design through a simulation analysis. Towards this end, the layout of the facility designed with pre-verification job using a simulation modeling and an experiment, and facility, logistics process, and personnel input method were made into a simulation model, and the design system's adequacy was evaluated through an experiment. To produce 120 mobile bath vehicles annually, it was analyzed that 14 general workers and seven skilled workers were adequate through the experiment. It was also identified that three painting process lines carried out through outsourcing were adequate. Production lead time was 201.7 hours on average and it was 230 hours maximum. To meet customer delivery service level of 95% within the deadline when establishing a customer order and vehicle delivery plan, it was analyzed that more than 215 hours of lead time is needed minimum. If the process cycle time is reduced to 85% upon system stabilization and skillfulness improvement, it was analyzed that annual output of 147 vehicles can be achieved without additional production line expansion.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.430-434
• /
• 2015

Safety education at the tertiary level prepares students to enter construction industry with adequate safety knowledge; then accidents can be prevented proactively. However, safety subject has not been paid adequate attention in universities and most institutional safety programs consider safety matters in isolation. Meanwhile, anatomical theory in the medicine field has been successfully adopted and proved potential advantageous in various scientific disciplines. With this regard, this study proposes a visualization based Building Anatomy Model (BAM) for construction safety education, which utilizes the anatomical theory in order to improve student's safety knowledge and practical skill. This BAM consists of two modules: 1) Knowledge Acquisition Module (KAM) aims to deliver safety knowledge to students through building anatomy models; 2) Practical Experience Module (PEM) where students safely perform construction activities by using the system to improve safety skill. The system trial is validated with virtual scenarios derived from real accidents cases. This study emphasizes the visualization based building anatomy model would be a powerful pedagogical method to provide effectively safety knowledge and practical skill for students, as a result, safety competence of students would be enhanced.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.363-384
• /
• 2014

The adequate measurement of government expenditure efficiency for Energy Technology Development is a difficult empirical issue and the literature on it, particularly when it comes to aggregate and international data. Contribution in this study is threefold: first this study analyze the adequate measurement of government expenditure efficiency on Energy Technology sector of 24 OECD countries and korea. Second this study reconstruct efficiency composite indicators, named "Energy Technology Development Interest level indicator". Third this study assesses the efficiency of government expenditure for Energy Technology Development. The results can be summarized as follow: Korea's government expenditure efficiency for Energy Technology Development is highly ranked among 25 OECD countries based on Energy Technology Development R&D Budgets and Energy Technology Development R&D Budgets per thousand units of GDP indicators. However, Korea's ranking has fallen to 20th. The assessment suggests that government will be have to provide more government expenditure to enhance the efficiency on Energy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.248-255
• /
• 2012

Three levels of boron (0, 30, 60 ppm) were supplemented in practical corn-soybean based starter and grower diets, containing either adequate or inadequate Ca or P. A total of 1,800, 1-day-old sexed broiler chicks were assigned to six dietary treatments and fed with the experimental diets for 42 days. Boron improved the overall feed conversion ratio, but increased body weight only at 21 days of age (p<0.01). Boron decreased feed intake in the case of feeding on a diet deficient in Ca and P, and tended to increase feed intake when birds received a diet adequate in Ca and P, signifying significant boron by Ca-P interaction (p<0.01). Mortality was not influenced by boron (p>0.05). Dietary Ca and P deprivation reduced body weight and feed consumption significantly, but did not influence the feed conversion ratio and mortality (p>0.05). Serum Ca level, ALP and ALT activities were not influenced either by dietary Ca and P deficiency or boron supplementation. Serum P content increased with respect to boron at 30 ppm. Bone breakage strength was not affected by dietary variables. Tibia ash, Ca and P were increased in response to the supplementation diet with 30 ppm boron, whereas 60 ppm showed no effect in most cases. Accordingly, the dietary boron supplementation of 30 ppm significantly decreased fecal Ca and P excretion, while there was a numerical decline in the 60 ppm boron as compared to the 0 ppm boron group. Data presented herein indicated that boron, either at the 30 ppm or 60 ppm supplementation level, was effective in conversion of feed to body weight, whereas only boron at 30 ppm contributed to the mineralization of bone thereby augmenting more Ca and P while excreting less through faeces.

• Journal of Nutrition and Health
• /
• v.34 no.5
• /
• pp.532-540
• /
• 2001

This study explored the effect of calcium levels and/or ovariectomy on bone composition and its related factors using the female Sprague-Dawley rats which achieved peak bone mass in normal(0.5%) calcium intake during growth period. The rats were randomly divided into six groups and fed 0.1%, 0.5% and 1.5% calcium diets for 8 weeks after ovariectomized and sham operation. The results indicated that body weight gain was higher in ovariectomized groups than sham groups, regardless of dietary calcium levels and food intakes. Serum Ca and P concentrations were normal level regardless of dietary calcium levels and operation. Estrogen concentration was decreased in ovariectomized rat groups. Serum alkaline phosphatase activity and urinary hydroxyproline were increased in ovariectomized groups. When rats were fed normal Ca diet during growing period, weight, length and breaking force of femur were not significantly different in all groups but increased the same level. Generally, lipid contents in lumbar and femur were lower in low calcium groups and this effect was more pronounced in femur. In case of femur, the significant decrease in Ca contents of bone was observed in a relatively short period of feeding low Ca diet, even though it appeared th desirable peak bone mass had achieved through the growing period by supplementing the adequate amount of calcium. The marked decrease of estrogen levels after ovariectomy did not seem to influence greatly bone parameters measured except bone wet weight. Therefore, this study indicated that lower intake of Ca might be more important determinating factor against osteoporosis than postmenopausal state stimulated by ovariectomy in female rats. With normal or high intake of Ca it appears possible to prevent bone loss in postmenopausal period, and this might apply only in case of achieving peak bone mass in the growing with the adequate intake of calcium. (Korean J Nutrition 34(5) : 532∼540, 2001)

• Journal of Nutrition and Health
• /
• v.39 no.6
• /
• pp.549-559
• /
• 2006

The present study determined the estimated dietary fiber (DF) intake per capita of Korean from 1991 to 2001 and analyzed the major food sources of dietary fiber for Korean using the data on per capita consumption of each food reported in the Korean National (Health and) Nutrition Survey Reports and the recently established DF database by the Korean Nutrition Society. The estimated mean daily DF intakes of Korean during the last 11 years $(1991{\sim}2001)$ were in the range of $19.25{\sim}21.22\;g\;or\;9.97{\sim}11.99\;g/1,000\;kcal$ with a small range of fluctuations. As of 2001, average DF intake per capita of Korean was estimated as 20.92 g or 10.59 g/1,000 kcal. The average DF intake level was under the Adequate Intake for DF (12 g per 1,000 kcal) of the Dietary Reference Intakes (DRIs) for Koreans established in 2005. The level of DF intake was relatively lower in small city residents compared to the large city or rural area. The top two major food group sources of DF for Korean were vegetables and cereals, in addition, legumes, fruits, seaweeds and seasonings were included among top five food groups. The ratio of DF intake from fruits was gradually increased but the ratio from legumes was steadily decreased during the last 11 years. The mostly contributed single foods for DF intakes of Korean were Kimchi and rice regardless of year and area. Percentage of DF intake from top ten single foods was continuously decreased from 65% in 1991 to 51 % in 2001. The results of this study revealed that DF intakes of Korean as of 2001 is insufficient compared to the Adequate Intake for DF for Korean and the source of fiber in Korean diet has been more various. Therefore the beneficial health effects of DF and the increased consumption of DF from a variety of food sources should be continuously emphasized through the nutritional education.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.