• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10209-10215
• /
• 2015

To assess the contribution of tumor necrosis factor $(TNF){\beta}$ +252 polymorphisms to risk and prognosis of hepatocellular carcinoma (HCC), we enrolled 150 pairs of sex- and age-matched patients with HCC, patients with cirrhosis alone, and unrelated healthy controls. $TNF{\beta}$ +252 genotypes were determined by polymerase chain reaction with restriction fragment length polymorphism. Multivariate analysis indicated that $TNF{\beta}$ G/G genotype [odds ratio (OR), 3.64; 95%CI, 1.49-8.91], hepatitis B surface antigen (OR, 16.38; 95%CI, 8.30-32.33), and antibodies to hepatitis C virus (HCV) (OR, 39.11; 95%CI, 14.83-103.14) were independent risk factors for HCC. There was an additive interaction between $TNF{\beta}$ G/G genotype and chronic hepatitis B virus (HBV)/HCV infection (synergy index=1.15). Multivariate analysis indicated that factors associated with $TNF{\beta}$ G/G genotype included cirrhosis with Child-Pugh C (OR, 4.06; 95%CI, 1.34-12.29), thrombocytopenia (OR, 6.55; 95%CI, 1.46-29.43), and higher serum ${\alpha}$-fetoprotein concentration (OR, 2.53; 95%CI, 1.14-5.62). Patients with $TNF{\beta}$ G/G genotype had poor cumulative survival (p=0.005). Cox proportional hazard model indicated that $TNF{\beta}$ G/G genotype was a biomarker for poor HCC survival (hazard ratio, 1.70; 95%CI, 1.07-2.69). In conclusion, there are independent and additive effects between $TNF{\beta}$ G/G genotype and chronic HBV/HCV infection on risk for HCC. It is a biomarker for poor HCC survival. Carriage of this genotype correlates with disease severity and advanced hepatic fibrosis, which may contribute to a higher risk and poor survival of HCC. Chronic HBV/HCV infected subjects with this genotype should receive more intensive surveillance for early detection of HCC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1771-1776
• /
• 2011

In this paper, as an attempt to improve the preparation conditions of $YBa_2Cu_3Ox$ superconducting bulk samples, the properties of $YBa_2Cu_3Ox$ superconductor depending on the particle size of YBCO powder and $BaPbO_3$ as an additive have been investigated, and a study on the effects of additive to the density, grain alignment, and porosity of samples that affect the critical current of superconductor has been performed. In order to prepare superconductor, $YBa_2Cu_3Ox$ powder synthesized by sol-gel method, showing a size distribution of 0.2~1 ${\mu}m$ was used. The $BaPbO_3$ added to promote grain growth and to decrease porosities and weak links between grain boundaries of $YBa_2Cu_3Ox$ superconductors. In the samples prepared by sol-gel synthesized powder with 10, 20, and 30 wt% conductive $BaPbO_3$ additives, the sample with 20 wt% $BaPbO_3$ obtained the highest critical current of 4.74 A, showing 20 wt% higher critical current than that with solid state synthesized powder.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.167-180
• /
• 1993

The effects of coating variables on the formation of aluminide coating layer with good oxidation resistance on the strongest hot-forged superalloy in the world, KM 1557 developed at KIST by pack cementation process were studied. Pack aluminizing were performed by high-activity process with pure aluminium powders and by low-activity process with codep powders. For high-activity process, Al deposition rate, growth rate of coating layer, and cross-sectional microstructures were influenced by the species and additive amounts of activators and the additive amounts of pure aluminium powders. For low-activity process, Al deposition rate, growth rate of coating layer, and the cross-sectional microstructures were not influenced by the species but additive amounts of activators. Surface structures of coating layer were influenced by the species of activators. Regardless of aluminium activity, Al deposition rate was proportional to the square root of time and parabolic rate constants were different with the species of activators. The activation energy for deposition of aluminium was different with the species of activators for high-activity process. Regardless of the species of activators, the activation energy for deposition of aluminium was 12~14 Kcal/mole for low-activity process.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.575-579
• /
• 2006

Solid electrolyte interface is formed on a carbon electrode used as an anode in Li-ion battery, which can be of $Li^{+}$ intercalation/deintercalation during the first cycle. The passivation film formed by a solvent decomposition during the initial charge process affects cell performance and it was one of the main reason of an initial irreversible capacity. This paper describes the use, for the first time, of $Li_2CO_3$ as the additive for the formation of a passivation film on the carbon surface to suppress the initial irreversible reaction. Chronopotentiometry, cyclic voltammetry, and impedance spectroscopy were used to investigate the effects of the $Li_{2}CO_{3}$ additive. Scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction were also used to monitor changes in the surface morphology and composition of the passivation film formed by solvent decomposition and the precipitation of $Li_{2}CO_{3}$. The addition of $Li_{2}CO_{3}$ to a solution of 1 M $LiPF_{6}$/EC:MA (1:3, v/v) resulted in a decrease in the initial irreversible capacity and it was due to the suppression of the solvent decomposition on the electrode surface.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.683-689
• /
• 2015

Response surface methodology (RSM) is a statistical procedure frequently used for optimization studies. The purpose of this study was to determine the optimal spray drying condition for manufacturing Sikhye powder using RSM. Independent variables included the additive contents of maltodextrin (MD), inlet temperature, and velocity of sample feed velocity. The dependent variables were water uptake (g), solubility (%) and particle size (${\mu}m$). Regression models describing the changes of water uptake (g), solubility (%) and particle size (${\mu}m$) with respect to the independent variables were statistically significant with coefficients of determination, $R^2$, greater than 0.9. The results indicated that the inlet temperature of the spray dryer was the most important independent variable that affected the water uptake (g), while the additive content of MD and the sample feed velocity had maximum effects on the solubility (%) and particle size (${\mu}m$) of the Sikhye powder, respectively. The optimum final product was expected to have the lowest possible water uptake (g) and particle size (${\mu}m$) but the highest possible solubility (%). In conclusion, the best spray drying conditions were as follows: additive MD content, 22%; inlet temperature, $140^{\circ}C$ ; and spray dryer sample feed velocity, 51 mL/min.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.149-156
• /
• 1989

Multicellular tumor spheroids of HeLa cells have been grown in a static culture system. Samples of spheroids were exposed for 2 h to graded concentration of cis-platinum and its analogue, carboplatin, and then response assayed by survival of clonogenic cells. The purpose of present experiment is to clarify the effectiveness of these platinum compounds and to evaluate intrinsic radiosensitivity of cells using spheroids of HeLa cells as an experimental in vitro model. Variations of the drug sensitivity of monolayers as well as spheroids were also evaluated in cell-survival curves. In cis-platinum concentration-survival curve, there was a large shoulder extending as far as $Cq=3.4{\mu}M$, after which there was exponential decrease in survival curve having a Co Value of $1.2{\mu}M$ in spheroids. While the Co for the spheroids was essentially no significant change, but Cq value was larger than that of monolayers. This suggest that the effect of cis-platinum is greater En the monolayer with actively proliferaing cells than hypoxic one. In the carboplatin concentration-survival curves, the Co value of spheroids was $15.0{\mu}M$ and the ratio with the Co from monolayer cell $(32.5{\mu}M)$ was 0.40, thus indicating that the spheroids had a greater sensitivity to carboplatin than monolayers. Therefore, the effect of carboplatin is mainly on the deeper layers of spheroids acting as hypoxic cell sensitizer. The enhanced effect was obtained for monolayer cells using combined X-ray and carboplatin treatment 2 hours before irradiation. The result shown in isobologram analysis for the level of surviving fraction at 0.01 indicated that the effect of two agents was trusty supra-additive. From this experimental data, carboplatin has excited much recent interest as one of the most promising, since it is almost without nephrotoxicity and causes less gastrointestinal toxicity than cis-platinum. Interaction between carboplatin and radiation might play an important role for more effective local tumor control.

• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.775-787
• /
• 2018

This study was conducted to investigate for the natural methane emission inhibitor as a feed additive no adversely effect on rumen fermentation. Five different Control (Wheat barn (0.05 g), MRA(Methane Reduction Additive)-1 (Allium fistulosum L. (0.05 g)), MRA-2 (Sodium Lauryl Sulfate (0.025 g) + Wheat barn (0.025 g) mixed), MRA-3 (Sodium Dodecyl Sulfate (0.025 g) + Wheat barn (0.025 g) mixed), and MRA-4 (Allium fistulosum L. (0.02 g) + Tannic acid (0.02 g) + Wheat barn (0.01 g) mixed) contents were used to perform 3, 6, 9, 12, 24 and 48 h incubation for in vitro fermentation. Ruminal pH values were ranged within normal ruminal microbial fermentation. Dry matter digestibility was not significantly different across the treatments during the whole fermentation time. Also, the result of microbial growth had no adversely effect on during the whole fermentation time. At 24 h, methane emission was significantly lower (P<0.05) than all treatments except to MRA-1. Especially, MRA-4 carbon dioxide emission was significantly lower (P<0.05) than control at 9, 24 and 48 h incubation. In addition MRA-4 propionate concentration was significantly higher (P<0.05) than control at 24 h incubation. The result of RT-PCR Ciliate-associated methanogens were significantly lower (P<0.05) at MRA-1, MRA-3 and MRA-4 than control at 24 h incubation. Based on the present results, MRA-4 could be suggestible methane emission inhibitor as a natural feed additive.

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.229-236
• /
• 2019

Background: Emerging reports suggest the potential for adverse health effects from exposure to emissions from some additive manufacturing (AM) processes. There is a paucity of real-world data on emissions from AM machines in industrial workplaces and personal exposures among AM operators. Methods: Airborne particle and organic chemical emissions and personal exposures were characterized using real-time and time-integrated sampling techniques in four manufacturing facilities using industrial-scale material extrusion and material jetting AM processes. Results: Using a condensation nuclei counter, number-based particle emission rates (ERs) (number/min) from material extrusion AM machines ranged from $4.1{\times}10^{10}$ (Ultem filament) to $2.2{\times}10^{11}$ [acrylonitrile butadiene styrene and polycarbonate filaments). For these same machines, total volatile organic compound ERs (${\mu}g/min$) ranged from $1.9{\times}10^4$ (acrylonitrile butadiene styrene and polycarbonate) to $9.4{\times}10^4$ (Ultem). For the material jetting machines, the number-based particle ER was higher when the lid was open ($2.3{\times}10^{10}number/min$) than when the lid was closed ($1.5-5.5{\times}10^9number/min$); total volatile organic compound ERs were similar regardless of the lid position. Low levels of acetone, benzene, toluene, and m,p-xylene were common to both AM processes. Carbonyl compounds were detected; however, none were specifically attributed to the AM processes. Personal exposures to metals (aluminum and iron) and eight volatile organic compounds were all below National Institute for Occupational Safety and Health (NIOSH)-recommended exposure levels. Conclusion: Industrial-scale AM machines using thermoplastics and resins released particles and organic vapors into workplace air. More research is needed to understand factors influencing real-world industrial-scale AM process emissions and exposures.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.275-282
• /
• 2016

Recently, increased caffeine intake has led to an increase in caffeine addiction and withdrawal symptoms. Coffee is surreptitiously consumed in as an additive to milk and caramel. There are few studies on how coffee affects the health of modern people. The purpose of this study is to determine the efficacy and side effects of coffee by awareness of coffee consumption patterns among college students, who are the principal consumers. A survey was conducted from May 11 to 17, 2015 and 302 questionnaires were analyzed. The respondents were 140 men (46.4%) and 162 women (53.6%). In terms of coffee additives, 151 (50.0%) respondents chose 'americano' and 111 (36.8%) 'variation'. The frequency of coffee intake and sleep time for college students was negatively correlated, with the correlation coefficient of -0.145 and significance probability of 0.019. The group that was 'positively' aware of the principal ingredients of coffee had a higher level of academic training than those with 'negative' awareness (p=0.000). Women recognized a larger number of side effects than men: 1.99 and 1.36, respectively, on average (p=0.001). 'Time for consumption' had statistically significant effects on the side effects of coffee consumption: consumption before/after lunch, before/after supper and before going to bed led to 0.4 times (p=0.048) and 0.3 times (p=0.023) more side effects, respectively, than consuming coffee after getting up and before/ after breakfast. Excessive caffeine intake through coffee led to limited sleep time and poorer learning concentration. The guidelines for proper coffee consumption should be created to help students consume coffee properly so that it will not affect sleep, learning concentration or adversely affect health.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.7-16
• /
• 2015

Effects of chemical composition ($Cu^{2+}$, $K_4P_2O_7$ and additive concentrations) of baths on properties of Cu thin films electrodeposited from pyrophosphate copper bath were investigated. Current efficiency was increased to be near 100% with increasing $Cu^{2+}$ concentrations from 0.02 to 0.3M. Decrease of current efficiency was observed in the range of 1.5~1.8M $K_4P_2O_7$ concentration, but current efficiency of about 100% was measured in the ranges of both 0.9~1.3M and 2.1~2.4M. The change of additive concentration did not influenced current efficiency. Residual stress of electrodeposited Cu thin films was measured to be about 20 MPa below 0.15 M $Cu^{2+}$ concentration and increased with the increase of it to 0.25 M. Maximum residual stress of 120MPa was observed at 0.25M $Cu^{2+}$ concentration. On the other hand, residual stress decreased from 80 to near 0 MPa as $K_4P_2O_7$ concentration varied from 0.9 to 2.4M and but The change of additive concentration did not affected on residual stress. $Cu^{2+}$ and $K_4P_2O_7$ concentrations significantly affect on surface morphology of electrodeposited Cu thin films, but additive concentration slightly affected. From XRD analysis, the microstructures of electrodeposited Cu thin film was affected from the changes of $Cu^{2+}$ and $K_4P_2O_7$ concentrations, but not from that of additive concentration. Strong preferred orientation of (111) peak was observed with increasing $Cu^{2+}$ and $K_4P_2O_7$ concentrations.