• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.51-59
• /
• 2001

A diesel engine oil formulated in KRICT and a commercial diesel engine oil (API CG-4) were tested by car and their Kinematic Viscosity, TAN, TBN, metal content, additive depletion, anti-wear property and IR analysis were analyzed. From the research, both of the tested oils had almost the same properties f3r the change of TAN and TBN, but the change of Kinematic Viscosity of formulated oil was slightly higher than that of commercial oil. The iron content in the commercial oil increased rapidly from 7000 km while that of the formulated oil was still low. These results were confirmed by the anti-wear test with a 4-ball wear test machine for the each samples. Also, for the commercial oil, the depletion factor of the Zn-DTP which was added as an anti-wear property did not change any more after 7000 km. But, that of the formulated oil changed continuously to 8000 km, which means that the ability to prevent wear of the sliding pairs exists for the formulated oil. From the analysis results of oil properties obtained by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil could be used more than 8000 km without severe wear of the sliding parts in the diesel engine.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.347-352
• /
• 2000

Before investigating the performance of NA-Q additive oil, we have studied the properties of the commercial reference oil by using an engine dynamometer. Experimemts were conducted for 300 hours with 2,950rpm and 22kw and every 50 hours the used oil was sampled for analyzing its physical and chemical propreties. The reference oil shows stable but slightly increasing viscosities during the experiment. It has good agreements with the change of its TAN and TBN. Friction coefficients and anti-wear characteristics are compared with its ZDTP depletion factor and the diameters of wear scar. The concentrations of metal particles are analyzed with the results of ICP and spectrometer, However it is found that the concentrations by filtration method shows large difference with those by standard method in spectrometer.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.152-160
• /
• 1997

A diesel engine oil which was formulated and a commercial diesel engine oil (API CG4) made from same base oil were tested by car and analyzed of their physical, chemical and mechanical properties. The tested oil to be analyzed were sampled from engine every 1000 km until 8000 km and determined the kinematic viscosity, TAN, TBN, metal content in oil, additive depletion, antiwear property and IR analysis. From the study, both the tested oils were almost same properties for the change of TAN and TBN, but the change of kinematic viscosity of formulated oil was slightly higher than that of commercial oil. But the concentration of metal in the formulated oil, especially iron, were increased much less during test. The iron content of the commercial oil was increase rapidly from 7000 km while the formulated oil was still low. These results were conformed by the antiwear test by 4-ball wear test machine for the samples. Also for the commercial oil, the depletion factor of the Zn-DTP which was added as an antiwear property was not change any more after 7000 km. But the formulated oil was change continuously until 8000 km, which mean that the ability of wear protection of the sliding parts exists for the formulated oil. With the results which were analyzed of the properties of oils by field test, it was found that the commercial oil could be used only within 7000 km, but the formulated oil can use more than 8000 km without severe wear of the sliding parts in the diesel engine.

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.542-550
• /
• 1996

ZnO-based ceramic varistors containing NiO range 0.5 mol% to 4.0 mol% were fabricated by standard ceramic techniques. The influence of NiO on the microstructure and electrical behavior of ZnO varistor was investigated. As the content of NiO additive increases, average grain size decreased from 16.5.mu.m to 13.2.mu.m, and the amount of NiO existing in the grain interior and grain boundary region was approximately equal. NiO acted as an acceptor which decreases donor concentration due to the increase of Zn vacancy in the grain, and as a driver which migrates Zn interstitial in the depletion region toward the interface of grain boundary, which resulted in the decrease of interface state density. As a result, increasing the content of NiO additive, barrier height, nonlinear exponent, and varistor voltage decreased, and leakage current increased. Wholly, the physical and electrical properties of the ZnO varistor can be said to be affected by the NiO additive.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.353-354
• /
• 2002

This study represents the newly advanced formulation of hydraulic fluids for extended drain interval and introduces the performance results of used oil samples from various excavators. The used oil samples, in this paper, show that there is a sharp change in viscosity drop and moderate additive depletion. For the extension of hydraulic fluid life. it is necessary to improve the stability of viscosity and oxidation. New target properties from the used oil analysis were proposed for extended life. Hydraulic oil with the viscosity index of 140 and improved thermal stability consists of group III base oil, showed the possibility of extension of fluid life.

• Tribology and Lubricants
• /
• v.20 no.1
• /
• pp.33-40
• /
• 2004

This study represents the newly advanced formulation of hydraulic fluids for extended drain interval and introduces the performance results of used oil samples from various excavators. The used oil samples, in this paper, show that there is a sharp change in viscosity drop and moderate additive depletion when viscosity index of hydraulic oil is very high. For the extension of hydraulic fluid life, it is necessary to improve the stability of viscosity and oxidation. New target properties from the used oil analysis were proposed for extended life. Performance of newly developed hydraulic oil based on used oil analysis is compared with previously used one. The properties of new formulation are the viscosity index of 140 and improved thermal stability consists of VHVI base oil. Field test results showed the possibility of extension of fluid life. Additionally, for development of high performance product, new required propertied and performances were discussed.

• Journal of Powder Materials
• /
• v.28 no.2
• /
• pp.110-119
• /
• 2021

In this study, the high-temperature oxidation properties of austenitic 316L stainless steel manufactured by laser powder bed fusion (LPBF) is investigated and compared with conventional 316L manufactured by hot rolling (HR). The initial microstructure of LPBF-SS316L exhibits a molten pool ~100 ㎛ in size and grains grown along the building direction. Isotropic grains (~35 ㎛) are detected in the HR-SS316L. In high-temperature oxidation tests performed at 700℃ and 900℃, LPBF-SS316L demonstrates slightly superior high-temperature oxidation resistance compared to HR-SS316L. After the initial oxidation at 700℃, shown as an increase in weight, almost no further oxidation is observed for both materials. At 900℃, the oxidation weight displays a parabolic trend and both materials exhibit similar behavior. However, at 1100℃, LPBF-SS316L oxidizes in a parabolic manner, but HR-SS316L shows a breakaway oxidation behavior. The oxide layers of LPBF-SS316L and HR-SS316L are mainly composed of Cr₂O₃, Fe-based oxides, and spinel phases. In LPBF-SS316L, a uniform Cr depletion region is observed, whereas a Cr depletion region appears at the grain boundary in HR-SS316L. It is evident from the results that the microstructure and the high-temperature oxidation characteristics and behavior are related.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.245-251
• /
• 2016

Trends of bioplastics, especially biomass-based bioplastics which is one of the most promising ways to solve the depletion of fossil fuels and global warming problems, were investigated. Emerged bioplastic polymers such as polylacticacid (PLA), polyglycolicacid (PGA) for cosmetic additive, polyhydroxyalkanoate (PHA) produced by bacterial fermentation, and cost effective starch-based polymer were discussed with their general studies. Also recent technologies of environment-friendly bioplastics for packaging and construction materials as well as disposable hygienic goods were briefly reviewed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.152-157
• /
• 2003

This study represents the newly advanced formulation of hydraulic fluids for extended drain interval and introduces the performance results of used oil samples from various excavators. The used oil samples, in this paper show that there is a sharp change in viscosity drop and moderate additive depletion when viscosity index of hydraulic oil is very high. For the extension of hydraulic fluid life, it is necessary to improve the stability of viscosity and oxidation. New target properties from the used oil analysis were proposed for extended life. Performance of newly developed hydraulic oil based on used oil analysis is compared with previously used one. The properties of new formulation are the viscosity index of 140 and improved thermal stability consists of VHVI base oil. Field test results showed the possibility of extension of fluid life. Additionally, for development of high performance product, new required properties and performances were discussed.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2020.10a
• /
• pp.220-220
• /
• 2020

Astaxanthin, a natural carotenoid component of shrimp, has been used as a food additive for the treatment of various diseases, but a functional role of Astaxanthin Nanosphere (AN) in the regulation of intestinal mucin (Muc) 2 production during bacterial infection has not described yet. In this study, we have investigated the effect of AN prepared from astaxanthin during Muc2 repression elicited by the Gram-negative bacterium V. vulnificus in human gastrointestinal epithelial (HT-29) cells. AN significantly inhibited the level of ROS production and PKC activation in recombinant protein (r) VvpE-stimulated HT-29 cells. Moreover, AN inhibited the PKC-mediated phosphorylation of extracellular signal-regulated kinase and nuclear factor-kappa B responsible for region-specific hypermethylation in the Muc2 promoter in rVvpE-treated HT-29 cells. In the mouse models of V. vulnificus infection, treatment with AN maintained the level of Muc2 expression in the intestine. On the basis of these results, we suggest that AN blocks the hypermethylation of the Muc2 promoter to restore the level of Muc2 production in HT-29 cells infected with V. vulnificus.