• Title/Summary/Keyword: addition

Search Result 101,097, Processing Time 0.121 seconds

A Study on the Revitalization of BIM in the Field of Architecture Using AHP Method (AHP 기법을 이용한 건축분야 BIM 활성화 방안 연구)

  • Kim, Jin-Ho;Hwang, Chan-Gyu;Kim, Ji-Hyung
    • Journal of the Korea Institute of Building Construction
    • /
    • v.22 no.5
    • /
    • pp.473-483
    • /
    • 2022
  • BIM(Building Information Modeling) is a technology that can manage information throughout the entire life cycle of the construction industry and serves as a platform for improving productivity and integrating the entire construction industry. Currently, BIM is actively applied in developed countries, and its use at various overseas construction sites is increasing This is unclear. due to air shortening and budget savings. However, there is still a lack of institutional basis and technical limitations in the domestic construction sector, which have led to the lack of utilization of BIM. Various activation measures and institutional frameworks will need to be established for the early establishment of these productive BIMs in Korea. Therefore, as part of the research for the domestic settlement and revitalization of BIM, this study derived a number of key factors necessary for the development of the construction industry through brainstorming and expert surveys using AHP techniques and analyzed the relative importance of each factor. In addition, prior surveys by a group of experts resulted in 1, 3 items in level, 2, 9 items in level, and 3, 27 items in level, and priorities analysis was performed through pairwise comparisons. As a result of the AHP analysis, it was found that the relative importance weight of policy aspects was highest in level 1, and the policy factors in level 2 and the cost-based and incentive system introduction factors were considered most important in level 3. These findings show that the importance of the policy guidance or institutions underlying the activation of BIM rather than research and development or corporate innovation is relatively high, and that the preparation of policy plans by public institutions should be the first priority. Therefore, it is considered that the development of a policy system or guideline must be prioritized before it can be advanced to the next activation stage. The use of BIM technologies will not only contribute to improving the productivity of the construction industry, but also to the overall development of the industry and the growth of the construction industry. It is expected that the results of this study can provide as useful information when establishing policies for activating BIM in central government, relevant local governments, and related public institutions.

Identification of Domesticated Silkworm Varieties Using a Whole Genome Single Nucleotide Polymorphisms-based Decision Tree (전장유전체 SNP 기반 decision tree를 이용한 누에 품종 판별)

  • Park, Jong Woo;Park, Jeong Sun;Jeong, Chan Young;Kwon, Hyeok Gyu;Kang, Sang Kuk;Kim, Seong-Wan;Kim, Nam-Suk;Kim, Kee Young;Kim, Iksoo
    • Journal of Life Science
    • /
    • v.32 no.12
    • /
    • pp.947-955
    • /
    • 2022
  • Silkworms, which have recently shown promise as functional health foods, show functional differences between varieties; therefore, the need for variety identification is emerging. In this study, we analyzed the whole silkworm genome to identify 10 unique silkworm varieties (Baekhwang, Baekok, Daebaek, Daebak, Daehwang, Goldensilk, Hansaeng, Joohwang, Kumkang, and Kumok) using single nucleotide polymorphisms (SNP) present in the genome as biomarkers. In addition, nine SNPs were selected to discriminate between varieties by selecting SNPs specific to each variety. We subsequently created a decision tree capable of cross-verifying each variety and classifying the varieties through sequential analysis. Restriction fragment length polymorphism (RFLP) was used for SNP867 and SNP9183 to differentiate between the varieties of Daehwang and Goldensilk and between Kumkang and Daebak, respectively. A tetra-primer amplification refractory (T-ARMS) mutation was used to analyze the remaining SNPs. As a result, we could isolate the same group or select an individual variety using the nine unique SNPs from SNP780 to SNP9183. Furthermore, nucleotide sequence analysis for the region confirmed that the alleles were identical. In conclusion, our results show that combining SNP analysis of the whole silkworm genome with the decision tree is of high value as a discriminative marker for classifying silkworm varieties.

Application of Greenhouse Climate Management Model for Educational Simulation Design (교육용 시뮬레이션 설계를 위한 온실 환경 제어 모델의 활용)

  • Yoon, Seungri;Kim, Dongpil;Hwang, Inha;Kim, Jin Hyun;Shin, Minju;Bang, Ji Wong;Jeong, Ho Jeong
    • Journal of Bio-Environment Control
    • /
    • v.31 no.4
    • /
    • pp.485-496
    • /
    • 2022
  • Modern agriculture is being transformed into smart agriculture to maximize production efficiency along with changes in the 4th industrial revolution. However, rural areas in Korea are facing challenges of aging, low fertility, and population outflow, making it difficult to transition to smart agriculture. Among ICT technologies, simulation allows users to observe or experience the results of their choices through imitation or reproduction of reality. The combination of the three-dimension (3D) model and the greenhouse simulator enable a 3D experience by virtual greenhouse for fruits and vegetable cultivation. At the same time, it is possible to visualize the greenhouse under various cultivation or climate conditions. The objective of this study is to apply the greenhouse climate management model for simulation development that can visually see the state of the greenhouse environment under various micrometeorological properties. The numerical solution with the mathematical model provided a dynamic change in the greenhouse environment for a particular greenhouse design. Light intensity, crop transpiration, heating load, ventilation rate, the optimal amount of CO2 enrichment, and daily light integral were calculated with the simulation. The results of this study are being built so that users can be linked through a web page, and software will be designed to reflect the characteristics of cladding materials and greenhouses, cultivation types, and the condition of environmental control facilities for customized environmental control. In addition, environmental information obtained from external meteorological data, as well as recommended standards and set points for each growth stage based on experiments and research, will be provided as optimal environmental factors. This simulation can help growers, students, and researchers to understand the ICT technologies and the changes in the greenhouse microclimate according to the growing conditions.

A Study on Microstructure and Mechanical Properties of TiB2-steel Composite Fabricated by Gas Pressure Infiltration Process (가스압 함침 공정으로 제조된 TiB2-steel 금속복합재료의 미세조직 및 기계적 물성에 관한 연구)

  • Lee, Jihye;Lee, Donghyun;Cho, Seungchan;Kwon, Hansang;Lee, Sang-Kwan;Lee, Sang-Bok;Kim, Junghwan
    • Composites Research
    • /
    • v.35 no.4
    • /
    • pp.248-254
    • /
    • 2022
  • In this study, TiB2-steel composite with high-fractional TiB2 reinforcement was fabricated by gas pressure infiltration process and the microstructure analysis and compressive strength and hardness were evaluated. To elucidate the correlation between microstructure and mechanical properties for fabricated composite, after the compression test of TiB2-steel composite, the fracture surface was analyzed and the fracture behavior on compression test was predicted. As a result of the compression fracture surface analysis, interfacial failure trace between the steel matrix and the reinforcement was observed, and the interface between the steel matrix and the reinforcement was analyzed using TEM. From the result of microstructure analysis on the fabricated composite, it was confirmed that, in addition to TiB2 reinforcement and steel matrix, TiC phase and coarse (Fe,M)2B (M=Cr,Mn) phase were formed. Throughout the thermodynamic calculation, it was confirmed that TiC and (Fe,M)2B can be formed as a stable phase under the process condition. The fabricated TiB2-steel composite had a significantly increased hardness, and the compressive strength and Young's modulus were improved by 3.07 times and 1.95 times, respectively, compared to steel matrix. It seems that the coarse (Fe,M)2B (M=Cr,Mn) phase formed throughout the composite causes the deterioration of mechanical properties, and by controlling the formation of the (Fe,M)2B (M=Cr,Mn) phase, it is judged that the mechanical properties of the TiB2-steel composite can be further improved.

Study on Cause Analysis of Capsizing Accident in Fishing Boat No. 66 Poongsung (어선 제66풍성호 전복사고 원인분석에 대한 연구)

  • Lee, Li-Na;Lee, Chang-Hyun;Ohn, Sung-Wook
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.28 no.6
    • /
    • pp.955-964
    • /
    • 2022
  • According to the statistics of maritime accidents statistics that have occurred in Korea over the past five years, maritime accidents caused by fishing boats have increased every year from 1,646 in 2016 to 2,100 in 2020. In particular, of the 378 capsizing accidents that have occurred in the past five years, 252 capsizing accidents of fishing boats account for a high proportion of 66.7%, therefore, it is urgent to come up with countermeasures. In this study, to determine the cause of the capsizing accident of fishing boat No. 66 poongsung, data such as stability and seawater inflow routes were collected, and the effects of waterproof, additional wood decks, and windbreakers on stability on were quantitatively analyzed. Additional decks, windbreakers, and waterproof installed in No. 66 poongsung cause initial list, deteriorate stability, and fail to meet fishing boat structural standards. In addition, it was analyzed that the stability was weakened due to the characteristics of the hull shape of No. 66 poongsung. To estimate the stability at the time of the accident, the stability at the time of the working in the fishing ground condition, amount of seawater inflow according to the change in sea conditions, hull oscillation situation, and change in stability due to the hull factor were calculated. As a result, the minimum GoM was satisfied at the time of working in the fishing ground, but it could not be restored at the maximum wave height of 4 m, and the minimum GoM was not satisfied at the maximum wave height of 4 m owing to the influence of seawater inflow and oscillation due to the hull list. However, the minimum GoM was satisfied if additional decks and windbreakers installation was excluded among the factors affecting the stability of No. 66 poongsung.

Analysis of Economic and Environmental Effects of Remanufactured Furniture Through Case Studies (사례분석을 통한 사용 후 가구 재제조의 경제적·환경적 효과 분석)

  • Lee, Jong-Hyo;Kang, Hong-Yoon;Hwang, Yong Woo;Hwang, Hyeon-Jeong
    • Resources Recycling
    • /
    • v.31 no.5
    • /
    • pp.67-76
    • /
    • 2022
  • The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO2-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

Comparison of the Survey of Teaching Demand for Distance Education Support for the 2021 and 2022 Academic Years : For D Community Colleges in Daegu (2021학년도와 2022학년도 원격교육지원에 대한 교수 수요도 조사 비교: 대구지역 D전문대학을 대상으로)

  • Park, Jeong-Kyu
    • Journal of the Korean Society of Radiology
    • /
    • v.16 no.4
    • /
    • pp.491-497
    • /
    • 2022
  • In this study, we tried to secure basic data to create an environment necessary for distance learning through a survey on professor demand. Among the 184 full-time faculty members of the university, 73 (39.89%) respondents in 2021 and 87 (47.28%) in 2022 were included. As a result of the research on professor demand, in the 2021 school year, 27 people (37%) were classified as LMS improvement items when checking attendance, 38 people (23.3%) were pin-mics as content development support items, and 26 people (35.6%), 33 people (45.2%) of GOM Mix and 25 people (34.2%) of the distance education support center wanted to learn video editing program as the item of video editing program they are currently using. In the 2022 school year, 27 people (31.03%) said mobile upgrade as an LMS improvement item, 52 people (59.8%) of pin-microphone as a content development support item, 33 people (37.9%), but currently using the content creation intention using a studio. As for the video editing program they are working on, 47 people (54%) of GOM Mix Pro and 23 people (26.4%) of the distance education support center want to learn content creation method. In addition, the intention to produce content using the studio for the 2021 and 2022 academic year and the desired educational topic of the distance education support center in the future appeared insignificant (p > 0.05). In this distance education support center, we are working to solve the class of LMS attendance, upgrade mobile, and plan to distribute pin microphones. We are planning to increase the usability of the studio and provide training on how to use video editing programs and how to create video content. In order for a smooth class to take place in a university distance class, the university authorities should seek ways to support the instructor so that he/she does not have difficulties in performing his/her role as a teaching designer, such as setting learning goals, organizing and organizing content, motivating learning, and establishing effective class participation plans. there is a need

The Current Status of Arrangement and the Direction of Rearrangement of the Archives Relating to the Korean Provisional Assembly (임시의정원 관련 기록물의 정리 현황과 재정리 방향)

  • Park, Dowon
    • The Korean Journal of Archival Studies
    • /
    • no.73
    • /
    • pp.161-188
    • /
    • 2022
  • This article explores the current status of arrangement of the archives relating to the Korean Provisional Assembly held by the National Assembly Library and suggests the direction of rearrangement focusing on the principles of arrangement. The Korean Provisional Assembly had records management regulations, and records were produced and stored according to them. However, the archives lost their original order at some point. The National Assembly Library collected and managed them in the 1960s. The National Assembly Library did not fully consider the records management system at the time of record production and various situations that may occur during the storage process while organizing the collected archives. At that time, the National Assembly Library did not follow the records management regulations of the Korean Provisional Assembly. In addition, the hierarchical structure of archives was not applied during the arrangement, and the National Assembly Library arranged without considering the Principal of Provenance and the Principle of original order. As a result, it became difficult to understand the structure and context of the archives. In order to solve these problems and come up with a plan for rearranging the archives, first of all, it is necessary to examine the characteristics of the records related to the Korean Provisional Assembly in accordance with the principles of record arrangement. First, according to the Principal of Provenance, it is necessary to identify the organization, function, and records and classify the records item, records file, creators, dates of creation, types of records etc. Second, by applying the Principle of original order, it is necessary to understand what the order of records was at the time when records were created and preserved. Third, it is necessary to examine whether the records are completely created and valid. It is impossible to completely arrange the archives related to the Korean Provisional Assembly as it was in the past. However, by examining the current state of arrangement and the direction of rearrangement, it will be possible to newly understand the contents, structure, and context of the archives and create a basis for effective reference service.

A Study on the Perception of Communication Ability of University Students - A junior college of engineering students (대학생 의사소통능력 관련 인식 조사 연구 - A전문대학 공대생을 중심으로)

  • Son, Kyong Hye;Park, Young Mi
    • Journal of the International Relations & Interdisciplinary Education
    • /
    • v.2 no.1
    • /
    • pp.57-82
    • /
    • 2022
  • This study aims to investigate and analyze the perception of communication capability which is one of the sub-competencies of NCS vocational substructure basic competence, and then seek the direction of prospective courses. To do this, the researcher conducts a non-face-to-face survey by creating five questions under the following five categories: The importance and necessity of communicative competence, students and educators of communicative competence classes, contents and methods of curriculum and teaching and learning, communicative competence and writing skills and operation of extracurricular programs. This researcher has been teaching basic education even before the communication skills curriculum was created in college, now, in a situation where communication skills have become selective education, it is intended to grasp the perception of college students about communication skills for first graders. This study attempted to analyze the survey area in more depth through group FGI after conducting an online survey by dividing it into several items. As a result, students felt that communication skills became motktkre important through COVID-19. Among the bottom five communication skills, speaking skills were found to be the most important, reading ability was recognized as the least important. On the other hand, there was a strong hope to know about the level of communication ability, type of communication, and method of communication about oneself. In addition, they recognized that communication skills should be learned in their first year of college, and hoped to be operated at all times as a non-disciplinary program. In particular, in the bottom five areas of communication skills, the expectations and actual hopes for speaking skills were the highest compared to the rest, and in terms of teaching and learning methods, they wanted to improve their skills through feedback and practice rather than theory. These research results have great implications for setting the direction of operation of classes, such as the content and method of classes in communication skills, in the future.

Hydrologic evaluation of SWAT considered forest type using MODIS LAI data: a case of Yongdam Dam watershed (MODIS LAI 자료를 활용하여 임상별로 고려한 SWAT의 수문 평가: 용담댐유역을 대상으로)

  • Han, Daeyoung;Lee, Jiwan;Kim, Wonjin;Baek, Seungchul;Kim, Seongjoon
    • Journal of Korea Water Resources Association
    • /
    • v.54 no.11
    • /
    • pp.875-889
    • /
    • 2021
  • This study compares and analyzes the Soil and Water Assessment Tool (SWAT) and Terra MODIS (Moderate Resolution Imaging Spectroradiometer) as coniferous, deciduous and mixed forest with Yongdam Dam upstream (904.4 km2). The hydrologic evaluation period was set to 10 years from 2010 to 2019, and the applicability of the 8-day MOD15A2 Leaf Area Index (LAI) data, 3 TDR (Time Domain Reflectometry) (GB, JC, CC), and 1 Flux Tower (DU) evaporation volume (YDD) data was simulated. As a result, the R2 of coniferous forest, deciduous forest and mixed forest are 0.95, 0.89, 0.90, soil moisture and evaportranspiration stations R2 were analyzed at 0.50 to 0.55 and 0.51, respectively, with R2 at 0.74, RMSE 2.75 mm/day, NSE 0.70 and PBIAS 14.3% for Yongdam inflow. Based on the calibrated and validated watersheds, the annual average evaportranspiration was calculated as coniferous 469.7 mm, deciduous 501. mm and 511.5 mm mixed forest, total runoff were estimated at coniferous 909.8 mm, deciduous 860.6 mm and 864.2 mm mixed forest. In the case of annual average evaportranspiration, it was evaluated that deciduous were high, but in the case of streamflow, it was evaluated that coniferous were high. Unlike other hydrologic with similar patterns throughout the year, the average annual evapotranspiration was about 7% higher than coniferous due to the higher evapotranspiration of deciduous with high leaf area index in summer and fall. In addition, deciduous were 9% and 6% higher for surface runoff and lateral flow, but the groundwater of coniferous was 77% higher. Therefore, it was confirmed that the total runoff was in order of coniferous, mixed forest, and deciduous.