• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.435-441
• /
• 2017

Detecting an inter-harmonic accurately is not easy work, because it has small magnitude, and its frequency which can be observed is not an integer multiple of fundamental frequency. In this paper, a new method using filter bank system and adaptive predictor is proposed. Filter bank system decomposes input signal to sub bands. In adaptive predictor, inter-harmonic is detected with decomposed sub band signal as input, and error signal as output. In this scheme, input-output characteristic of adaptive predictor is notch filter, as predicted harmonic is canceled in error signal, so detecting an inter-harmonic can be possible. Magnitude and frequency of detected inter-harmonic is estimated by recursive algorithm. The performances of proposed method are evaluated to sinusoidal signal model synthesized with harmonics and inter-harmonics. And validity of the method is proved as comparing the inter-harmonic detection results to MUSIC and ESPRIT.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.58-63
• /
• 2007

GPS signal is vulnerable to intentional and unintentional interferences since it has a very weak signal power and its structure is well-known. Among the interference rejecting techniques, the ATF is being generally used as a pre-correlation technique. However, it does not have a design parameter relating to the notch width, resulting in the spectral loss around frequency of the interference. The IIR notch filter has a design parameter relating to the notch width and can generate a sharp notch for the CW interference. In this paper, an adaptive IIR notch filter is proposed and the performance is evaluated using software signal generator and real measurements.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2152-2154
• /
• 2004

A robust bending frequency tracker is proposed to design the adaptive notch filter which removes the time-varying missile structural mode from the sensor measurements. To design the bending frequency tracker, firstly, the signal model is derived from the input-output relationship of Nehorai notch filter structure. Also, the time-varying nature of the bending frequency is modelled as the norm-bounded uncertainty. Based on the uncertain signal model, it is shown that the design problem of robust bending frequency tracker can be casted into that of adaptive robust $H_{\infty}$ filter or equivalently robust LMS filter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.719-726
• /
• 1987

In this paper, an adaptive IIR (infinite impulse response) notch filter of lattice type is constructed and its adaptation algorithm is proposed for the detection and retrieval of a sine wave signal embedded in noise. A modified method which adapts only one coefficient of the filter is also suggested. All these methods adapt the coefficients while keepting the poles of the filter inside the unit circle on z-plane, and thus they satisfy the condition on the stability of the IIR filter after it has converged. To investigate the convergence characteristics of these methods such as convergence speed and output S/N ratio, intensive computer simulation has been performed by varying the frequency of the sine wave and the input S/N ratio. And the results of the simulation have been compared to those of Rao and Kung's which shows relatively fast convergence speed. The methods proposed here, especially the second one. shows faster convergence speed and higher output S/N ratio than the Rao and Kung's.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.81-84
• /
• 1998

For ANC systems applied to aircrafts or passenger ships, engines from which reference signals are usually measured are located so far from seats where main part of controllers are placed. It can make feedforward ANC scheme difficult to implement or very costly. Feedback ANC algorithms which do not require reference signals and use error signals alone to update the filter, are usually sensitive to measurement noise ' and impulse noise. In this paper, reference signal needed for the feedforward control is not measured directly but generated with the estimated frequencies. Cascade adaptive notch filter (ANF), which has the low computational burden, is used to implement ANC system in real time. Several ANFs of order 2 are connected in series to estimate multiple sinusoids. Computer simulations and experiments in the laboratory for verifying efficacy of the proposed algorithm are carried out.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.3
• /
• pp.71-78
• /
• 2009

In this study, estimation of heart rate from measured PPG signal is proposed. PPG signal is to be measured blood flow in a blood vessel effected by systole and diastole. PPG sianl has single frequency so that PPG frequency can be tracked by 2nd IIR adaptive notch filter. PPG frequency is obtained continually from updating filter coefficient throughout adaptive algorithm and then the heart rate of human is approximately estimated.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.45-50
• /
• 2019

When PPG signal is used in mobile healthcare devices, the accuracy of the measured heartbeat decreases from the influence by the movement of the user. The reason is that the frequency band of the noise overlaps the frequency band of the PPG signal. In order to remove these same noises, the methods using frequency analysis method or application of acceleration sensor have been investigated and showed excellent performance. However, in applying these methods to low-cost healthcare devices, it is difficult to apply these methods because of much processing time and sensor's cost. In order to solve these problems, this study proposed the filter design method using an adaptive notch filter and the fuzzy inference system to extract more accurate heart rate in real time and evaluated its performance. As results, it showed better results than the other methods. Based on the results, when applying the proposed method to design the mobile healthcare device, it is possible to measure the heartbeat more accurately in real time.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.115-118
• /
• 2000

We present a new variable step size LMS algorithm using the correlation between reference input and error signal of adaptive filter. The proposed algorithm updates each weight of filter by different step size at same sample time. We applied this algorithm to adaptive multip]e-notch filter. Simulation results are presented to compare the performance of the proposed algorithm with the usual LMS algorithm and another variable step algorithm.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2001

In this paper, we designed two preprocessing adaptive filter - high pass filter and notch filter - using FPGA. For minimizing the calculation load of multi-channel and high-resolution ECG system, we utilize FPGA rather than digital signal processing chip. To implement the designed filters in FPGA, we utilize FPGA design tool(Altera corporation, MAX-PLUS II) and CSE database as test data. In order to evaluate the performance in terms of processing time, we compared the designed filters with the digital filters implemented by ADSP21061(Analog Devices). As a result, the filters implemented by FPGA showed better performance than the filters based on ADSP21061. As a consequence of examination, we conclude that FPGA is a useful solution in multi-channel and high-resolution signal processing.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.15-21
• /
• 2012

For a GNSS receiver's robustness against RFI and the high accuracy of navigation solution in GNSS, interference source detection and mitigation are needed. In this paper, an adaptive lattice IIR notch filter is employed to track single-tone continuous wave and swept continuous wave interference signals, and an interference detection method is proposed. Furthermore, this paper presents interference source characterization algorithm using multiple ground stations' interference detection results. The measurement of the signal powers from each ground station is used to build weighting factors to estimate the type of the interference. The performance of interference detection algorithm is simulated for scenarios of GPS signal in the presence of single-tone continuous wave interference and swept continuous wave interference.