• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.33-41
• /
• 1994

A single channel adaptive noise canceling (ANC) technique with a recursive time delay estimator (RTDE) is presented for removing effects of additive noise on the speech signal. While the conventional method makes a reference signal for the adaptive filter using the pitch estimated on a frame basis from the input speech, the proposed method makes the reference signal using the delay estimated recursively on a sample-by-sample basis. As the RTDEs, the recursion formulae of autocorrelation function (ACF) and average magnitude difference function (AMDF) are derived. The normalized least mean square (NLMS) and recursive least square (RLS) algorithms are applied for adaptation of filter coefficients. Experimental results with noisy speech demonstrate that the proposed method improves the perceived speech quality as well as the signal-to-noise ratio and cepstral distance when compared with the conventional method.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1173-1176
• /
• 2005

Depending on the characteristics of each 3D-DCT block, images can be classified into three types: images with motion and textures, images with high textures and little motion, images with little textures and little motion. In this paper, we propose an adaptive watermarking method using these characteristics of each 3D-DCT block. and the human visual system. The proposed method classifies patterns of 3D-DCT blocks based on the motion and texture information, and classifies the image type according to the ratio of these patterns. The watermark is inserted proportional to the 3D-DCT coefficients by using pattern adaptive JND, which. makes the proposed watermarking robust by inserting watermarks in as many blocks as possible. Experimental results show that the proposed method achieves better performance in terms of invisibility and robustness than the previous method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.3
• /
• pp.433-439
• /
• 2018

In this paper, a SDINS(strapdown inertial navigation system) rapid initial alignment technique with adaptive time delay compensation is proposed. The proposed method consists of two steps. In first step, misalignment and data latency are estimated by conducting pre-transfer alignment. Then, hybrid alignment is designed to rapidly find the misalignment changes induced by pyro-shock. To improve the performance of hybrid alignment, adaptive time delay compensation method is suggested. We verify the performance improvement of the proposed alignment scheme comparing with the conventional transfer alignment method by van test. The test result shows that the proposed alignment technique improves alignment performance.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1590-1599
• /
• 2016

The installation of distributed generation (DG) in the electrical networks has numerous advantages. However, connecting and disconnecting of DGs (CADD) leads to some problems in coordination of protection devices due to the changes in the short circuit levels in the different points of network. In this paper, an adaptive method is proposed based on available setting groups (SG) of relays. Since the number of available SG is less than possible CADD states, a classifying index (CI) is defined to categorize the several states in restricted setting groups. Genetic algorithm (GA) with a suitable objective function (OF) is used as an optimization method for the classification. After grouping, a modified coordination method is applied to achieve optimal coordination for each group. The efficiency of the proposed technique is demonstrated by simulation results.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.65-67
• /
• 2008

An adaptive response surface method with Latin Hypercube sampling strategy is employed to optimize a magnet pole shape of large scale BLDC motor to minimize the cogging torque. The proposed algorithm consists of the multi-objective Pareto optimization and ($1+{\lambda}$) evolution strategy to find the global optimal points with relatively fewer sampling data. In the adaptive RSM, an adaptive sampling point insertion method is developed utilizing the design sensitivities computed by using finite element method to set a reasonable response surface with a relatively small number of sampling points. The developed algorithm is applied to the shape optimization of PM poles for 6MW BLDC motor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.3
• /
• pp.217-224
• /
• 2003

In this study, the adaptive triangular beam method(ATBM) considering different sound reflection coefficients and angles of a triangular beam on two or more planes as well as diffraction effect is suggested. The ATBM, subdividing a tracing triangular beam into multiple triangular beams on reflection planes, gives reliable and convergent sound-field analysis results without the dependancy on the number of initial triangular beam segmentation to search sound propagation paths from source to receiver. The validity of the method is verified by the comparison of numerical and experimental results for energy decay curve and steady-state sound pressure level of rooms having direct, reflective and diffractive sound paths.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.487-492
• /
• 2002

In this paper, we proposed a control method of an unknown nonlinear system using a dynamical neural network. The proposed method is composed of neural network of state space model type, performs for a unknown nonlinear system, identification with using the dynamical neural network, and then a nonlinear adaptive controller is designed with these identified informations. In order to verify the effectiveness of the proposed method, we simulated one-link manipulator. The simulation results showed the effectiveness of using the dynamical neural network in the adaptive control of one-link manipulator.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.32-41
• /
• 1995

In the analysis of metal forming processes by the finite element method, there are many numerical instabilities such as element locking, hourglass mode and shear locking. These instabilities may have a bad effect upon accuracy and convergence. The present work is concerned with improvement of stability and efficiency in two-dimensional rigid-plastic finite element method using various type of elemenmts and numerical intergration schemes. As metal forming examples, upsetting and backward extrusion are taken for comparison among the methods: various element types and numerical integration schemes. Comparison is made in terms of stability and efficiency in element behavior and computational efficiency and a new scheme of adaptive directional reduced integration is introduced. As a result, the finite element computation has been stabilized from the viewpoint of computational time, convergency, and numerical instability.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.3-7
• /
• 2011

This paper addresses a computationally simple adaptive beamforming method to cancel interferences arriving onto a sensor array. In the proposed method, an estimate of the interference subspace is extracted from a submatrix of the sample covariance matrix and an orthonormal basis for the estimated subspace is efficiently found, one basis vector being updated every sample. Its computational burden is just $O(M{\eta})$ in an M-sensor array when ${\eta}$ directional signals are present. The new method does not make any premises of the geometrical structure of arrays, and can be applied to arbitrary arrays.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.163-167
• /
• 2002

This paper propose the new spatially adaptive wavelet thresholding for image denosing. The method of wavelet thresholding for denosing, has been concentrated on finding the best uniform threshold or best basis. However, not much has been done to make this method adaptive to spatially changing statistics which is typical of a large class of images. Experimental results show that the proposed method outperforms level dependent thresholding techniques and is comparable to spatial Wiener filtering method in matlab.