• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1768-1789
• /
• 2016

In contemporary video streaming systems based on HTTP protocol, video players at the client side are responsible for adjusting video quality to network conditions and user expectations. However, when multiple video clips are streamed simultaneously, an intricate application logic implemented in the video players overlays the TCP mechanism which is responsible for a balanced access to a shared network link. As a result, some video players may not obtain a fair share of network throughput and may be vulnerable to an unstable video bit-rate. Therefore, we propose to simplify the algorithms implemented in the video players, which are responsible for the adjustment of video quality and constrain their functionality only to sending feedback to a server about a state of the player buffer. The main logic of the system is shifted to the server, which is now responsible for bit-rate selection and prioritisation of the video streams transmitted to multiple clients. To verify our proposition, we performed several experiments in a laboratory environment which show that when the server cooperates with the clients, the video players experience fewer quality switches and the system achieves better fairness when allocating network throughput among the video players. However, this comes at the cost of worse utilisation of network bandwidth.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.82-87
• /
• 2015

There are many current researches that are looking to improve the quality of HTTP adaptive streaming services. However, the existing schemes have a serious problem of QoE (Quality of Experience) degradation because few consider VBR video transmission. To cope with this problem, in this paper, we proposed a novel media quality adaptation scheme called CB-DASH (Content and Buffer-aware DASH). The proposed scheme controlled the video quality considering the VBR characteristics of video and the client's buffer state. Through the simulation, we proved that our scheme accomplished a more accurate estimated bandwidth than the conventional DASH and improved the QoE of streaming service.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.61-67
• /
• 2017

In this paper, an adaptive MAC technique for various underwater environment with narrow-bandwidth and low transmission speed was proposed. In previously published Underwater Packet Flow Control (UPFC) technique, three transmission types (normal, block and parallel transmission) had been proposed using the number of transmission and transmission time. In addition to the UPFC, the proposed technique is an improved version of UPFC having more effective queuing technique for merge transmission. A mathematical model of the proposed queuing theory was constructed and its increased efficiency per unit transmission number was also verified based on simulations.

• Journal of Communications and Networks
• /
• v.6 no.1
• /
• pp.68-77
• /
• 2004

In the near future packet networks should support applications which can not predict their traffic requirements in advance, but still have tight quality of service requirements, e.g., guaranteed bandwidth, jitter, and packet loss. These dynamic characteristics mean that the sources can be made to modify their data transfer rates according to network conditions. Depending on the customer&; needs, network operator can differentiate incoming connections and handle those in the buffers and the interfaces in different ways. In this paper, dynamic QoS-aware scheduling algorithm is presented and investigated in the single node case. The purpose of the algorithm is in addition to fair resource sharing to different types of traffic classes with different priorities ?to maximize revenue of the service provider. It is derived from the linear type of revenue target function, and closed form globally optimal formula is presented. The method is computationally inexpensive, while still producing maximal revenue. Due to the simplicity of the algorithm, it can operate in the highly nonstationary environments. In addition, it is nonparametric and deterministic in the sense that it uses only the information about the number of users and their traffic classes, not about call density functions or duration distributions. Also, Call Admission Control (CAC) mechanism is used by hypothesis testing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.99-106
• /
• 2001

In this paper, an 1-Watt amplifier for IMT-2000 was designed and fabricated using feedfarward method which has the highest linearity and wide bandwidth. Since feedforward is sensitive to surroundings for example heat, input power level, time and so on, adaptive controller using micro controller is adopted. We fabricated a HPA with 35 dB gain, 40 dBm of 1-dB compression point, and utilized variable attenuator and variable phase shifter using reflection type to cancel loop signal. From the measured results, the fo11owing facts were obtained, in signal loop, main carrier over 35 dB was suppressed and error signal over 30 dB is cancelled in error loop, IMD characteristics above 60 dBc were obtained.

• Journal of Information Processing Systems
• /
• v.1 no.1 s.1
• /
• pp.49-54
• /
• 2005

With the recent advances in Micro Electro Mechanical System (MEMS) technology, low cost and low power consumption wireless micro sensor nodes have become available. However, energy-efficient routing is one of the most important key technologies in wireless sensor networks as sensor nodes are highly energy-constrained. Therefore, many researchers have proposed routing protocols for sensor networks, especially cluster-based routing protocols, which have many advantages such as reduced control messages, bandwidth re-usability, and improved power control. Some protocols use information on the locations of sensor nodes to construct clusters efficiently. However, it is rare that all sensor nodes know their positions. In this article, we propose another cluster-based routing protocol for sensor networks. This protocol does not use information concerning the locations of sensor nodes, but uses the remaining energy of sensor networks and the desirable number of cluster heads according to the circumstances of the sensor networks. From performance simulation, we found that the proposed protocol shows better performance than the low-energy adaptive clustering hierarchy (LEACH).

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.295-302
• /
• 2002

Currently digital communication system adapt various digital modulation schemes. All these communication systems are required to cause the minimum interference to adjacent channels, they must therefore employ the linear power amplifiers. In respect to linear power amplifiers, there are many linearization techniques. Feedforward power amplifier represent very wide bandwidth and high linearization capability. In the feedforward systems overall efficiency is reduced due to the loss of delay line. In this paper, delay filter instead of transmission delay line adapted to get more high efficiency. Experimental results showed that ACLR has improved 17.04dB which is added 2.54dB by using the delay filter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• Journal of Internet Computing and Services
• /
• v.5 no.6
• /
• pp.11-20
• /
• 2004

Proportional Fair (PF) share policy has been adopted as a downlink scheduling scheme in CDMA2000 l×EV-DO standard. Although It offers optimal performance in aggregate throughput conditioned on equal time share among users, it cannot provide a bandwidth guarantee and a strict delay bound. which is essential requirements of real-time (RT) applications. In this study, we propose a new scheduling policy that provides quality-of-service (QoS) guarantees to a variety of traffic types demanding diverse service requirements. In our policy data traffic is categorized Into three classes, depending on sensitivity of Its performance to delay or throughput. And the primary components of our policy, namely, Proportional Fair (PF), Weighted Fair Queuing (WFQ), and delay-based prioritized scheme are intelligently combined to satisfy QoS requirements of each traffic type. In our policy all the traffic categories run on the PF policy as a basis. However the level of emphasis on each of those ingredient policies is changed in an adaptive manner by taking into account the channel conditions and QoS requirements. Such flexibility of our proposed policy leads to offering QoS guarantees effectively and. at the same time, maximizing the throughput. Simulations are used to verify the performance of the proposed scheduling policy. Experimental results show that our proposal can provide guaranteed throughput and maximum delay bound more efficiently compared to other policies.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.176-192
• /
• 2014

The realization of Wireless Multimedia Sensor Networks (WMSNs) has been fostered by the availability of low cost and low power CMOS devices. However, the transmission of bulk video data requires adequate bandwidth, which cannot be promised by single path communication on an intrinsically low resourced sensor network. Moreover, the distortion or artifacts in the video data and the adherence to delay threshold adds to the challenge. In this paper, we propose a two stage Quality of Service (QoS) guaranteeing scheme called Prioritized Multipath WMSN (PMW) for transmitting H.264 encoded video. Multipath selection based on QoS metrics is done in the first stage, while the second stage further prioritizes the paths for sending H.264 encoded video frames on the best available path. PMW uses two composite metrics that are comprised of hop-count, path energy, BER, and end-to-end delay. A color-coded assisted network maintenance and failure recovery scheme has also been proposed using (a) smart greedy mode, (b) walking back mode, and (c) path switchover. Moreover, feedback controlled adaptive video encoding can smartly tune the encoding parameters based on the perceived video quality. Computer simulation using OPNET validates that the proposed scheme significantly outperforms the conventional approaches on human eye perception and delay.