• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2281-2287
• /
• 2013

Network Coding(NC) is a new paradigm for network communication. In network coding, intermediate nodes create new packets by algebraically combining ingress packets and send it to its neighbor node by broadcast manner. Network Coding has rapidly emerged as a major research area in information theory due to its wide applicability to communication through real networks. Network coding is expected to improve throughput and channel efficiency in the wireless multi-hop network. Prior researches have been carried out to employ network coding to wireless ad-hoc network. In our study, intermediate nodes identify one-hop bidirectional flows for network coding decision. We expect that the proposed scheme shall improve decoding success rate of network coded packet. From the simulation, the proposed network coding scheme achieved better performance in terms of coding gain and packet delivery rate than traditional network coding scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.9-15
• /
• 2013

Recent works on ad hoc network study have shown that achievable throughput can be made to scale linearly with the number of receive antennas even if the transmitter has only a single antenna. In this paper, we propose a non-parametric linear minimum mean square error (MMSE) receiver for achieving further gain in performance when the channel state information at receiver (CSIR) of interferers is imperfect. The key feature to make our approach effective is to exploit the autocorrelation of the received signal. In fact, by incorporating the desired channel information on top of the observations including interference and noise only, the proposed method achieves large fraction of the optimal MMSE transmission capacity without transmission rate loss. From the SINR analysis as well as transmission capacity simulations in realistic ad hoc network system, we show that the proposed non-parametric linear MMSE receiver brings substantial performance gain over existing multiple receive antenna algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2029-2046
• /
• 2016

Energy consumption is an important index in mobile ad hoc networks. Data packet transmission increases among nodes, particularly in big data communication. However, nodes may be unable to transmit data packets because of energy over-consumption. Consequently, information may be lost and network communication may block. While opportunistic network is a kind of mobile ad hoc networks, researchers do not focus on energy consumption in opportunistic network communication. This study proposed an effective sensor energy supply scheme that can be applied in opportunistic networks. This scheme considers nodes sensor requests and communication model. In this scheme, nodes do not only accomplish energy supply in communication, but also extend communication time in opportunistic networks. Compared with the Spray and Wait algorithm and the Binary Spray and Wait algorithm in simulations, the proposed scheme extends communication time, increases data packet transmission, and accomplishes energy supply among nodes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.141-150
• /
• 2013

Simulation is an important technique to test and verify routing protocol correctness. However, simulation does not guarantee that the protocol works expectedly on a real world environment because it needs to rely on assumptions and simplified properties such as radio characteristics and effects of geographical constraints that may not reflect the real world networking environments. Therefore, a real world experiments are necessary to gain a practical insight into the actual performance of ad hoc networks. In this paper, we build a test-bed to evaluate multi-hop ad hoc networks for high speed video streaming inside a building using AODV-UU routing protocol. Our observation indicates that the considered ad hoc network can provide a sufficient performance for a low rate streaming data in terms of throughput, PDR (Packet delivery ratio) and the average delay.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.29-34
• /
• 2008

In this paper, we propose an entropy-based dynamic routing protocol for supporting effective route stability in mobile ad-hoc wireless sensor networks(MAWSN). The basic ideas and features are as follows. First, construction of entropy-based stable routing route using mobility of nodes between a source node and a destination node. Second, usage of location and direction information for route construction to support resource saving. Third, We consider a realistic approach, in the points of view of the MAWSN, based on mobile sensor nodes as well as fixed sensor nodes in sensor fields while the conventional research for sensor networks focus on mainly fixed sensor nodes. The performance evaluation of the proposed routing protocol is performed via simulation using OPNET. The simulation results show the proposed routing protocol can effectively support route stability and packet delivery ratio.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.65-73
• /
• 2004

By the progress of communication and hardware technology, It is possible to organize wireless sensor nodes using the tiny sensor in recently. It is a critical aspect to minimize energy consumption for long-term lively sensor because wireless sensor nodes are associated with the available resources. The wireless sensor network is restricted in communication, exhaustion of power, and computation but it is very similar an Ad-Hoc network. Each sensor node products a few data and application layer of each sensor has slow transmitting feature. Unlike Ad-hoc, which is usually source or sink, base station of the each senor nodes works as sink and the other nodes except sink node works as source. Generally, wireless sensor network keep staying fixed state and observing circumstances continuously after setting up. It doesnt fit for the wireless sensor networks under functioning of existing ad-hoc networks because original Ad-Hoc network routing protocol couldnt operate for wireless sensor network features. This thesis propose the effective routing protocol way in the filed of the expanded routing protocol based on tree with considering on the characteristic of wireless sensor networks pattern.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.101-110
• /
• 2014

The purpose of this research is to extend Ad-hoc network system lifetime with the proposed routing protocol which has considered hop lifetimes of the nodes while guaranteeing QoS in the establishment process of Ad-hoc network communication paths. Based on another power aware routing system that proposed in the advanced research [1], we are proposing an alternative power aware routing system in which nodes' hop lifetimes are compared in order to extend the lifetime of an Ad-hoc network system and delay factors have been considered for the assurance of QoS. The research of the routing protocol in this paper, which aims to maximize the system survival time considering power consumption status during the path searching in MANET and pursues the mechanism that controls hop delays for the same reason, can be applied to the study of WSN. The study concerning such phenomena is essential so that the proposed protocol has been simulated and verified with NS-2 in Linux system focusing on the lifetimes of the hops of the nodes. Commercialization of smart devices and arrival of the ubiquitous age has brought about the world where all the people and things are connected with networks. Since the proposed power aware method and the hop delay control mechanism used to find the adequate communication paths in MANET which mainly uses batteries or in WSN, they can largely contribute to the lifetime extension of the network system by reducing power consumptions when utilized for the communications attempts among soldiers during military operation, disaster areas, temporary events or exhibitions, mobile phone shadow areas, home networks, in-between vehicle communications and sense networks, etc. This paper presents the definitions and some advantages regarding the proposed outing protocol that sustain and extend the lifetime of the networks.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.829-834
• /
• 2004

Nodes communicate through wireless channels under peer-to-peer level in ad-hoc mobile networks. The nodes are free to move around in a geographical area and are loose]y bounded by the transmission range of the wireless channels. Also, a node is completely free to move around, there is no fixed final topology. Hence, to manage the inter-node communication and data exchange among them a leader node is required. In this paper we introduce an efficient leader election algorithm for mobile ad hoc networks where inter-node communication is allowed only among the neighboring nodes. Furthermore we present the result of performance evaluation through simulation. The algorithm is efficient and practical since it uses least amount of wireless resources and does not affect the movement of the nodes.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.289-301
• /
• 2018

IIoT, the IoT technology applied to the industrial field, is being used as a monitoring technology for increasing in production rate and safety of workers. However, monitoring through the construction of IIoT network using Ethernet and RS485 in production lines where dozens to hundreds of machine tools are manufacturing components, have difficulties of infrastructure cost and network flexibility and fluidity. Therefore, in this paper, using IEEE 802.15.4 standard WSN device to construct a Ad-Hoc WSN in the production line. In addition, the transmission period and order of the sensor nodes are set by applying the EtherCAT communication method in which the payload frames are shared by all the sensor nodes. From this, we have overcome the problem of reliability decline and real-time issue due to the packet collision of wireless network and confirmed that it is a wireless network routing method that can be used in the actual industrial field.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.23-28
• /
• 2008

In this paper, we propose location-aided cooperative routing protocol (LACARP) for supporting power saving and stable route lifetime in mobile ad-hoc wireless sensor networks. The main ideas and features of the proposed routing protocol are as follows. First, the definition of the area of route search using location-based information to support power saving transmission. Second, the expect zone-based establishment of routing route within the area of route search. Third, the cooperative-aided transmission method. In the operation of data transmission over the established rout the datas are transmitted via both the established route and cooperative route aided by neighbor nodes. The performance evaluation using OPNET(Optimized Network Engineering Tool) shows the LACARP can improve the packet delivery ratio and power saving transmission efficiently.