• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.31-42
• /
• 2014

Purpose: The present study was conducted to investigate the effect of the physical properties of RGP lens induced by lens polishing on the actual wearer's subjective comfort, the tear film break-up time and the blinking rate as a follow-up study that revealed the relationship between the lens physical properties during lens manufacturing and lens wearer's factors. Methods: RGP lenses made from the three different polishing conditions (25, 50 and 100 seconds) were applied on 28 eyes of 17 subjects, aged 20 to 29 years, without any known disease and surgical history in the eyes. While the subjects were asked to wear the RGP lenses longer than a week, the questionnaire for the comfortability was administered everyday. Subjective and objective tear break-up time and blinking rate of the wearers were further measured. Results: The wearer's subjective comfortability showed some difference in the type of discomfort and satisfaction score according to the polishing status when wearing RGP lenses made from different polishing conditions longer than a week, and a bigger difference in satisfaction score induced by polishing condition was especially shown in experienced RGP lens wearer rather than un-experienced wearer. In the case of RGP lens wearer compared with the ones without the wearing experience, as the wearing time increased subjective and objective tear break-up time were increased and the blinking rate was decreased. However, subjective and objective tear break-up time were tended to decrease with even longer wearing time when wearing the RGP lens made from the polishment for 100 seconds. Conclusions: These results confirmed that the optimization of physical properties of the lens may not give the same effect on the wearer's subjective and objective symptoms and other factors when actual wearing. From the results, it can suggest that the success rate of RGP lens wear may be changed by physiological factors such as the stabilization of wearer's tear film, comfortability and lens wearing experience when wearing RGP lens based on 'The manufacturing standard for soft contact lens/hard contact lens' provided by Korea Food and Drug Administration.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.179-185
• /
• 2017

Purpose: It is intended to raise awareness of importance of protective equipment and necessity of safety education by examining the actual condition of measures to deal with accident, occurrence of injury, whether safety education is received or not, the actual condition of wearing protective equipment, and working environment of dental lab and dental technician. Methods: A self-administered survey was conducted for a total of 150 dental technologists. A chi-squared test and independent-samples t-test was carried out by using SPSS WIN Program (version 12.0) in order to analyze the actual condition of safety education according to work experience and position and whether injury occurred according to whether to wear protective equipment. Significance level was 0.05. Results: With regard to whether injury occurred according to whether safety education was received, there was 'receiving the safety education-injured (71.8%)', 'not receiving the safety education-injured (79.7%)', 'receiving the safety education-not injured (28.2%)', and 'not receiving the safety education-not injured (20.3%)'. The statistical results of injury occurrence according to safety education were not significant. With regard to whether to be injured according work experience, there was 'less than 10 years-injured (68.4%)', 'less than 10 years- not injured (31.6%)', '10 years or above-injured (89.1%)', and '10 years or above-not injured (10.9%)'. The statistical results of injury occurrence according to work experience were significant (p<0.001). Conclusion: Dental lab and specialized agencies should continue to be interested in periodic safety training, recommending wearing protective equipment and personal protective equipment support and so on.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1935-1940
• /
• 2009

This study investigates the actual wearing conditions of functional mountaineering garments in Korea and provides suggestions on the development of more effective functional mountaineering garments through the examination of consumer data. This survey was based on 107 respondents who enjoy mountaineering and was composed of 5 sections consisting of personal information, purchasing habits, essential features for mountaineering garments, satisfaction levels based on features and functions, and additional comments on the improvement of mountaineering garments. Respondents said that essential features for mountaineering garments are quick absorbing/drying, insulation, water and wind proof, and elasticity. These properties become more effective when users wear mountaineering garments in layers. They want lower prices and easy to wash garments. Therefore, it is necessary to consider not only the main functions, but also the needs of consumers for easy washing and price.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.111-116
• /
• 2012

This study analyzed the accidents and researched on risk of the actual condition in roof works. This study revealed that 68% of accidents in roof works occurred on small sized construction sites. And 79% of accidents are caused by fall. It is simply because most laborers do not wear the safety harness and the mounted equipment is not properly installed. According to our research, we realize that most of roof works have some risk of the fall accidents. Most of roof working sites have the danger of falling at ladder and temporary walkway. In oder to prevent accidents in roof works, the basic rule such as wearing the safety harness must be followed.

• Fashion & Textile Research Journal
• /
• v.16 no.3
• /
• pp.406-420
• /
• 2014

The goal of this study is to support the children's pants construction methods that secure clothing size and fit appropriateness through proposed improvements of denim pants construction method focusing on 4-year-old boys. Depths interview on the actual condition, measurements and calculations for positions and ease of the clothing points corresponding to the body points actually worn were conducted for 47 denim pants of nine boys. "Characteristics of the areas worn" and "physical characteristics of lower body" were analyzed, and improvements of 4-year-old children's denim pants construction method were proposed. As the results, the different figures in "characteristics of the areas worn" between the existing children's pants construction methods and children's actual wearing habits were found, and identification of distinct children's lower body from adults' supports that we should avoid tracing adults' methods without reasons. Children's pants construction method on basis of actual wearing should be devised to solve fit problems. Improvements of children's method were proposed such as ease of girth by different area worn, ease of "elastic waist girth", the difference between "elastic waist girth" and "pattern waist girth", and the difference between "pattern waist girth" and "pattern hip girth" as considerations of pants girth items, and appropriate position "clothing waist girth" "pants hip length" level, "pants crotch length" level, "clothing knee length" level, and "pants outside length" level for pattern making as considerations of clothing length items.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2008

Purpose: To investigate the proper care system of sample-wearing cosmetic contact lens (SWCCL). Methods: Research on the actual condition about SWCCL was examined in fifty cosmetic contact lens wearer in their 10s and 20s by the questionnaire. Also, the extents of the contamination of gram-negative bacteria and fungi were measured in SWCCL after wearing for 2, 4 and 6 weeks, and it was investigated whether the proper care system could prevented the contamination. Results: As the result of the questionnaire, people purchased the cosmetic contact lens after trying SWCCL with a mean of 4.5. The contamination of gram-negative bacteria and fungi were significantly increased in SWCCL-wearing period-dependent manner. In both Group 1 (rubbing SWCCL and exchanging preserving solution every wearing of SWCCL) and Group 2 (only exchanging preserving solution every wearing of SWCCL without rubbing SWCCL), the contamination of gram-negative bacteria and fungi were prevented perfectly. In the case of Groups having every-week care, the proliferation of gram-negative bacteria and fungi were somewhat suppressed, and rubbing was helpful of decreasing the contamination. The biweekly care had scarcely any effect for preventing the contamination. Conclusions: By exchanging the preserving solution every wearing of SWCCL, the contamination of gram-negative bacteria and fungi could be suppressed perfectly.

• Journal of Fashion Business
• /
• v.22 no.4
• /
• pp.1-19
• /
• 2018

Unlike other ready-made suits, which are normalized based on aspects like, designs, materials, sewing methods, has to be worn for three years, designing and pattern development of school uniform depends greatly on satisfaction and appearance. Furthermore, school uniform is of importance as many teenagers spend most of their time at school. In the present work, an attempt has been made to suggest ideal school uniform for female middle school students based on their actual uniform conditions and design preferences, so that the demands of artistic aspect, and the requirements of a suitable uniform for a female teenager can be fulfilled. Initially, a survey about the actual wearing condition was held to figure out the actual uniform conditions and design preferences. Based on the result of the survey, two types of school uniform were made with different patterns. Finally, the most ideal school uniform for female middle school students was suggested based on the experiment involving a few aspects such as suitability and functionality. It is conjectured that school uniform survey and investigation, could provide useful information to the school uniform business market.

• Journal of the Korean Home Economics Association
• /
• v.37 no.12 s.142
• /
• pp.59-67
• /
• 1999

This study analyzed firefighter's actual wearing condition of turnout gear The results are as fellows: 1. When a firefighter is employed, Korea applies only the minimum of firefighters stature and weight but America applies both the minimum and the maximum. The choice of size is highly related with stature more than chest circumference. 2. The satisfaction degree of thermal barrier is very low, 3%. They used rubber gloves rather than heatproof gloves. This is more serious in small country like 'up', 'myun' than in cities. For laundering, they used sprinkling method with firefighting hose. Firefigthers hoped that their clothes could be classified tv the seasons and fire places. 3. frefighter had high unsatisfaction with the movement of hands and leges in the aspect of movement adjustability, air permeability, weight, body temperature regulation, and breathing in the hygenic aspect, fire resistance, thermal resistance property, water proof, chemical reactivity and electrical conductivity. Thev were also unsatisfied with water proof boots and gloves. They were generally satisfied with helmets but firefighters over 90kg of weight were rather unsatisfied. 4. The satisfaction degree for physical fitness was very low and the items with which they were not satisfied depend on physical features. 5. To develop turnout gear, they wanted changes in design, material and size. Reflection tape need to be replaced with high quality products and they wanted the use of velcro and zipper in fastening system.

• Journal of the Korean Home Economics Association
• /
• v.49 no.10
• /
• pp.49-56
• /
• 2011

The purpose of this study is to research the difference between the size suggested by brand uniforms and the size suitable for high school girls. We compared and analyzed the size system of brand uniforms after researching the wearing conditions of uniforms of 4 brands (A, B, C, D) in order to establish a size system of brand uniforms that fits different body types of teenagers. First, we conduct research on the actual condition of brand uniforms worn by high school girls, and investigate unsatisfactory factors and problems. Second, we actually measure the uniform size of each brand and analyze measurement differences between each brand. Our results show each brand uniform has different size specifications and the importance of appropriate size specification is greater as students select uniform based on design and brand awareness rather than body size. Compared with the average body size the skirt and especially the blouse is much smaller with no extra room compared with standard size 85 blouses and size 71 skirts. Therefore, the adjustment of size specification is needed in brand school uniforms. However, a larger scale investigation is needed as this study was conducted with a limited sample size.

• Journal of the Korean Society of Costume
• /
• v.60 no.5
• /
• pp.88-105
• /
• 2010

The purpose of this study is to grasp the actual wearing conditions, inconvenience and problems with cycle wear. To attain this purpose, a questionnaire was completed by direct observation and by interviewing bicyclists. The questionnaire was given to 273 bicyclists. The questionnaire consisted of items that are related to concerns with dressing appropriately and enhancement of physical performance through dress. Following are the results of this study. According to the survey, many of them purchased imported cycle wear rather than national cycle wear, and the satisfaction according with purchase rate was low. Bicyclists were uneasy with finding right size cycle wear especially for women. It turned out that the area of the knee and elbow are mostly the areas that they get hurt while riding. Even though the knee and elbow are the mostly hurt area, bicyclists do not prefer to wear appropriate protector for the knee and elbow to excel in their performance in cycling. In material related questions, lower dissatisfaction was indicated for the lints caused by fraction. Average satisfaction was indicated for the distortion after washing, changes in color, touch of the fabric, matters with static and sweat. With regard to the areas where the bicyclists felt discomfort was highly indicated with lower-body clothing. Discomfort was highly indicated with crotch area when riding long period of time. Also when riding a cycle, discomfort was indicated with the leggings cuffs when it comes upward with riding motion. Most of the bicyclists felt the tight fitting leggings were embarrassing.