• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.286-289
• /
• 2008

본 연구에서는 특별피난계단의 제 배연시스템의 실태 및 개선방안에 대해 설문조사를 수행하여 분석하였다. 총 50명의 전문가의 의견을 수렴하여 분석하였으며 국내 제 배연 시스템의 전반적인 기술 및 법적 수준은 선진국대비 $40{\sim}60%$로 평가 되었다. 또한 현재의 기준이 안전한 피난로 확보를 위해 개선되어야 한다는 답변이 64%로 나타나 이에 따른 개선이 필요한 것으로 나타났다.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2010

Objectives : The purposes of this study were to evaluate exhaust ventilation systems(EVSs) and to suggest problems and improvements. Methods : For 50 small and medium-sized enterprises, we carried out evaluation of EVSs. We evaluated hoods with smoke tester and measurement of capture velocity. In addition, we used several indicators for performance evaluation designed in this study. Results : 1. Based on the smoke flow pattern and the criteria of occupational health and safety act, 67.8% of hoods were rated 'good' level at smoke test whereas 26.3% were rated 'good' level at measurement of capture velocity. 2. 29.3% of hoods, of which ratio of measured actual air flow at hood(Qah) to required ideal exhaust air flow at hood(Qih) was 1 or more, were rated 'good' level. 3. The % of EVS, of which ratio of measured actual air flow at stack(Qast) to total required ideal exhaust air flow at hood(Qith) was 1 or more, was 29.0%. 4. For the ratio of measured Qast to existing air flow at fan(Qfan), only 5% of EVSs were 1 or more and 26.0% were 0.8 or more but less than 1.0. 5. For the ratio of measured Qast to total measured actual exhaust air flow at hood(Qath), 74.0% were 0.8 or more but less than 1.0. 6. The percentage of EVS, of which ratio of total measured Qath to existing Qfan was 0.8 or more, was 19.0%. 7. The percentage of EVS, of which ratio of total measured Qath to total required ideal exhaust Qith was 1 or more, was 26.0%. 8. For the comprehensive evaluation indicators designed in this study, 29.0% were 0.8 or more. Conclusions : We found that few exhaust local ventilations at small and medium-sized enterprises were rated 'good' level and that most exhaust local ventilations had 'poor' design and installation. Therefore, relevant professional manpower and enterprises have to construct exhaust local ventilation where it is needed, and technical guidance and economic support are needed to improve 'poor' exhaust local ventilation after self-evaluation.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.25-32
• /
• 2021

In the previous study, a study was conducted to improve the exhaust gas intake efficiency by improving the existing soot measurement probe in the shape and angle of the exhaust port. As a result, it can be seen that the smoke measurement performance according to the shape and angle is improved. In previous studies, the performance of the soot probe was not confirmed for the Korean KD 147 mode, which has a low suction flow rate and a long inspection time. So, we would like to confirm the improvement of the smoke probe performance of the Korean KD 147 mode, which is close to the actual driving conditions. The probe used in this study is another type of probe, and has a circular ring shape instead of a rib and variable center position unit, so the probe center hole is located close to the center of the exhaust pipe.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.106-112
• /
• 2011

This study is to investigate the effect of an aromatic content in high cetane number (CN) fuels on exhaust emissions under low temperature diesel combustion, which expands the previous research about an aromatic content in low CN fuels. A 1.9L common rail direct injection diesel engine was run at 1500 rpm 2.6 bar BMEP with four fuel sets: an aromatic content of 20% (A20) or 45% (A45) with CN30, i.e. low CN fuels, and CN55, i.e. high CN fuels. Given experimental conditions, the trend of exhaust emissions in high CN fuels was inconsistent with that of low CN fuels which all produced nearly zero smoke but higher NOx for the high aromatic fuel (CN30-A45). For high CN fuels, however, the low aromatic fuel (CN55-A20) produced lower smoke than the high one (CN55-A45) while NOx was similar to each other. The cause of this discrepancy between high CN and low CN fuels is unclear whether it comes from that CN may be a dominant factor to govern exhaust emissions rather than an aromatic content or that the actual CN value of CN55-A45 is lower than CN55-A20. More decent fuel matrix should be prepared and further experiments are needed to confirm it.

• 한국분무공학회지
• /
• 제29권2호
• /
• pp.53-59
• /
• 2024

Cars are one of the main causes of air pollution in large cities, and 34.6% of domestic air pollution emissions come from mobile sources, of which cars account for 69.6%. In particular, the importance of nitrogen oxides (NOx) and particulate matter (PM), which are major pollutants in diesel vehicles, is increasing due to their high contribution to emissions. Therefore, in this study, the problem of natural regeneration caused by low exhaust gas temperature during low speed and low load operation was solved by applying a complex regeneration DPF that is not affected by temperature conditions to large diesel vehicles with higher driving time and engine displacement than small and medium-sized vehicles. And the feasibility of application to large diesel vehicles was reviewed by measuring the emission reduction efficiency. As a result of the reduction efficiency test on the actual vehicle durability product, PM showed a reduction efficiency of 84% to 86%, and the reduction efficiency of gaseous substances showed a high reduction efficiency of over 90%. The actual vehicle applicability test was completed with three driving patterns: village bus vehicle, police car, and road-going construction equipment vehicle, and no device problems occurred until the end of the test. Both load and no-load smoke measurement results showed a smoke reduction efficiency of over 96%.

• 보존과학회지
• /
• 제35권5호
• /
• pp.470-479
• /
• 2019

본고에서는 백제금동대향로의 고화질 촬영 및 실측을 통해 배연공과 흡기공의 확장이유를 밝히고자 하였다. 실험을 위해 백제금동대향로를 3차원 정밀 스캔한 뒤 스캔한 원본데이터를 기반으로 백제금동대향로 정밀재현품과 시판복제품을 3차원 스캔하여 전체적인 형태와 세부적인 문양을 원본데이터와 비교하였고, 뚜껑 내부구조 및 향연구멍의 크기와 위치가 실제유물과 가장 유사한 정밀재현품을 이용하여 배연공과 흡기공의 크기와 개폐유무에 따라 분향실험을 진행하였다. 분향실험 결과, 배연공과 흡기공의 크기에 따라서는 아랫줄 흡기공이 향로의 불완전 연소에 영향을 끼치는 것으로 확인되었으며, 배연공과 흡기공의 개폐유무에 따라선 봉황 배연공과 윗줄 배연공은 주로 연기를 배출하는 역할을 하며 아랫줄 흡기공은 주로 흡기구 역할을 한다는 것을 이번 실험을 통해 알 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1110-1116
• /
• 1993

A study on optimum operation performances of power efficiency, economy and exhaust emissions for a tractor was conducted. A mathematical model of multiple degree polynomial equation was applied to established the function of solid multiple parameter curves for specific fuel consumption (ge), cabon monoxide (CO) ,hydrcarbons (HC) and cabonaceous smoke (Rb). The optimum operation theorems for economy operation indicated by ge and for exhaust emissions described by Co , HC and Rb were obtained from analytical method and performance test data. The optimum operation theorems could exhibit optimum operation working points, curves, and regions. The optimum matching relations of engine speed and transmission parameters were analyzed by using computer simulation methods in accordance with the tractor specifications , actual farm working conditions in a typical drawbar pull work such as plowing , the optimum operation objective function, the ideal transmission ratio, practical gear shif ing positions and practical travel speed of the tractor TN55 medel. The results of the anlayzes indicated clearly that the optimum power efficient operation, energy saving and pollution reducing would be realized if the tractor would be operated according to theoptimum operation methods.

• 한국재난정보학회 논문집
• /
• 제19권2호
• /
• pp.439-450
• /
• 2023

연구목적: 국내에서 소방점검을 시행시 바닥면적 400m2 미만일 경우 공기유입구와 배출구간의 직선거리 5m이상 하라는 소방법규에 위반되는 대상물들이 있으며 이러한 이유를 분석하고 관련 소방법규의 필요성을 뒷받침 하기 위해 모형실험연구를 시행한 논문이다. 연구방법: 국내소방 대상물을 조사확인 하였고, 국내 및 해외논문 및 정책, 법규를 문헌고찰 하였으며, 400m² 미만의 거실에서 공기 유입구와 배출구간의 직선거리 5m 이하와 5m이상인 공간을 선정하여 모형실험 을 통해 분석하였다. 연구결과: 국내 소방법규(NFPC-화재안전성능기준)를 고찰 하였을 때 바닥면적 400m² 미만일 경우 공기유입구와 배출구 간의 5m 이상으로 이격 거리가 규정되어있지 만 실제 조사해 본 결과 이격 거리를 지키지 못하는 소방대상물이 있는 것으로 확인되었다. 또한 5m 이상의 직선거리에 대한 해외 소 방법규에 대한 논문 고찰을 해봤을 때 공기유입구와 배출구간의 직선거리에 대한 규정이 없는 것으로 나타났지만, 모형실험 한 결과 공기유입 구와 배출구간의 직선거리가 5m이상 일 때가 5m미만 일 때보다 배출속도가 우수한 것으로 나타났다. 결론: 본 연구에서는 공기유입구와 배출구간의 직선거리에 대한 제연설비 성능비교로 해외 소방법규 를 조사하였을 때 직선거리에 대한 강제규정이 없지만 국내 소방법규(NFPC_화재안전성능 기준)에 서는 5m이상을 해야 한다는 법규를 뒷받침하는 근거를 마련하는 논문이다. 앞으로 설계 단계에서 이를 반영하여 소방 감리의 책임과 부담을 줄여줄 수 있는 토대가 마련되길 바란다.