• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.294-302
• /
• 2020

In a genetic algorithm, computer simulations are performed based on the natural evolution process of life, such as selection, crossover, and mutation. The genetic algorithm searches the approximate optimal solution by the parallel arrangement of Schema, which has a short definition length, low order, and high adaptability. This study examined the possibility of improving the efficiency of the optimal solution by considering the characteristics of the building block hypothesis, which are one of the key operating principles of a genetic algorithm. This study evaluated the efficiency of the optimization results according to the gene sequence for the implementation in solving problems. The optimal design problem of the water pipe was selected, and the genetic arrangement order reflected the engineering specificity by dividing into the existing, the network topology-based, and the flowrate-based arrangement. The optimization results with a flowrate-based arrangement were, on average, approximately 2-3% better than the other batches. This means that to increase the efficiency of the actual engineering optimization problem, a methodology that utilizes clear prior knowledge (such as hydraulic properties) to prevent such excellent solution characteristics from disappearing is essential. The proposed method will be considered as a tool to improve the efficiency of large-scale water supply network optimization in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1178-1185
• /
• 2010

Recently, high speed of container freight cars is causing fatigue damage of wheel. Sudden failure accidents cause a lot of physical and human damages. Therefore, damage analysis for wheel prevents failure accident of container freight car. Wheel receives mechanical and thermal loads at the same time while rolling stocks are run. The mechanical loads applied to wheel are classified by the horizontal load from contact of wheel and rail in curve line section and by the vertical force from rolling stocks weight. Also, braking and deceleration of rolling stocks cause repeated thermal load by wheel tread braking. Specially, braking of rolling stocks is frictional braking method that brake shoe is contacted in wheel tread by high breaking pressure. Frictional heat energy occurs on the contact surface between wheel tread and brake shoe. This braking converts kinetic energy of rolling stocks into heat energy by friction. This raises temperature rapidly and generates thermal loads in wheel and brake shoe. There mechanical and thermal loads generate crack and residual stress in wheel. Wetenkamp estimated temperature distribution of brake shoe experimentally. Donzella proposed fatigue life using thermal stress and residual stress. However, the load applied to wheel in aforementioned most researches considered thermal load and mechanical vertical load. Exact horizontal load is not considered as the load applied to wheel. Therefore, above-mentioned loading methods could not be applied to estimate actual stress applied to wheel. Therefore, this study proposed safety estimation on wheel of freight car using heat-structural coupled analysis on the basis of loading condition and stress intensity factor.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.2
• /
• pp.143-149
• /
• 2002

Nowadays senile dementia is on the rise as consequence of serious social problem because of it is old aged society by improvement of medical service. However remedial approach is not being done because of we still don't have an infallible cure of dementia and dementia is been hard to cure. Thus it is introduced in this study to the concept of Occupational therapy, which is one of the remedies. I tried to find out which remedy is the best to cure demented elderly and which is been able to use on field. For this study, I applied a developed Occupational therapy program in actual practice. First, I chose nine demented elderly who are lived in 'David's house' located in Daejon metropolitan city, and I separated them in three groups for this study. Second, I applied each Occupational therapy to first and second group, and I did not apply any Occupational therapy to third group. The first and second group was applied the program, two times a week for an hour, for three months. The measurement of Cognitive function was practiced five times - one time before applying the Occupational therapy by MMSE-K, and three times during applying the program, and one time after ending of the program. The measurement of ADL was practiced two times - one time before applying the Occupational therapy by the Barthel ADL, and one time after one month from ending the program. Effectiveness of Occupational therapy and possibility of application of Occupational therapy program are proved because of this study shows the Occupational therapy keeps well the cognitive function and the ADL function of demented elderly, improves those functions, affects positively to the whole life. However we must develop Occupational therapy, which is proper to a trait of character, and expanded application is needed. In addition, temporary remedy must not be performed but continuous cure. This study will be complement by studying about special situation researcher cannot control something like unexpected death of demented elderly by other diseases.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.1-25
• /
• 2013

The present study explores the problem of the placelessness and alienation through spaces of redevelopment in South Korean animation film since the 2000's. Actual space in South Korean society has been destroyed and changed unceasingly, and, in that space, humans have experienced existential conflict. While the swift development of digital technology has transcended physical restrictions to form one great network, humans are still limited as materially based beings. The recent steps in South Korean animation film are noteworthy because sociocultural changes since the 1990's and the relationship between the individual and the system are perceived in ways different from those of the past. and , the works analyzed in the present study, reveal the special sense of place in South Korean society, where the destructive reorganization of space leads to the instability of life. By intentionally bypassing a sense of place and the authority automatically bestowed on representational images, these works prompt the viewer to reexamine the relationship between reality and images. Space in these two works are presented representationally but immediately destroyed, and humans or the characters in the works accept this unfeelingly. The loss of place, which is committed by the massive system, and listless humans' weakness and alienation in response are depicted as signs of sociocultural abnormality. By showing the destructive loss of place and individuals who respond with self-anesthesia and self-estrangement, these works open viewers' eyes to South Korean society, where not only social alienation but also self-alienation is occurring. By perceiving South Korean animation film as a sociocultural phenomenon and analyzing it through the concepts of the placelessness and alienation, the present study seeks to expand further discussions on animation film.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.1-8
• /
• 2020

Air ducts installed for ventilation inside buildings accumulate contaminants during their service life. Robots are installed to clean the air duct at low cost, but they are still not fully automated and depend on manpower. In this study, an intersection detection algorithm for autonomous driving was applied to an air duct cleaning robot. Autonomous driving of the robot was achieved by calculating the distance and angle between the extracted point and the center point through the intersection detection algorithm from the camera image mounted on the robot. The training data consisted of CAD images of the duct interior as well as the cross-point coordinates and angles between the two boundary lines. The deep learning-based CNN model was applied as a detection algorithm. For training, the cross-point coordinates were obtained from CAD images. The accuracy was determined based on the differences in the actual and predicted areas and distances. A cleaning robot prototype was designed, consisting of a frame, a Raspberry Pi computer, a control unit and a drive unit. The algorithm was validated by video imagery of the robot in operation. The algorithm can be applied to vehicles operating in similar environments.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.6
• /
• pp.39-50
• /
• 2019

Purpose - Since the local liquor industry uses the agricultural products produced in the region as the main raw material, cultivation of the industry can be a way to expand the demand for domestic agricultural products and can contribute to the income increase of the farmers. In addition, the local liquor industry can be developed into a region-specific industry differentiated from other regions by linking with the region's tourism resources. Therefore, in order to achieve various derivative effects through promotion of the local liquor industry, it is necessary to precisely understand the factors related to the purchase and consumption of local liquor which then will lead to an increase in consumption. This study analyzes the current status and problems of local liquor industries and examines the determinants of consumers' purchasing decisions of regional specialties through questionnaires. We will then propose a strategy to promote consumption of locally produced alcoholic beverages. Research design, data, and methodology - An online Domestic Consumer Survey was conducted to identify the actual purchases and uses of local liquors for 500 consumers nationwide. Based on the questionnaire results, the analysis uses an ordered probit model. Results - As a result of analyzing the effect of consumer characteristics on the purchase of local liquors, it was found that the average cost of drinking, income, local specialty, brewery experience, and health concerns have a significant effect on gender, drinking frequency. All the variables except the participation in the training of the special provincial manufacturing method were found to be statistically significant. The statistical significance was at a 1% significance level for the remaining factors excluding the bottle design. This shows that the higher taste, quality, price, and harmony with food, the higher the probability of purchasing local liquors. Conclusions - In the analysis of factors influencing the purchase intention of local liquors, it was found that factors such as taste, quality, price, and harmony with food had a significant effect. Given the diversity of purchasing factors, the importance of diversification strategies is emphasized again. In particular, it will be important to secure wide publicity for local liquors through various PR strategies.

• Journal of Intelligence and Information Systems
• /
• v.17 no.3
• /
• pp.1-23
• /
• 2011

The contextual subjective well-being (SWB) of context-aware system users can be very helpful in recommending relevant mental health services, especially for those who struggle with mental illness due to a metabolic syndrome or melancholia. Self-surveying measuring or auto-sensing methods have been suggested to monitor users' SWB. However, self-surveying measuring method is not inappropriate for a context-aware service due to requesting personal data in a manual and hence obtrusive manner. Moreover, auto-sensing methods still suffer from accuracy problem to be applied in mental health services. Hence, the purpose of this paper is to propose a contextual SWB estimation method to estimate the user's mental health in unobtrusive and accurate manners. This method is timely in that it acquires context data from the user's literal responses, which expose their temporal feeling. In particular, we developed a measuring method based on exposed feeling verbs and degree adverbs in chat and other text-based communications which show anger or negative feelings. Based on the proposed contextual SWB degree estimation method, we developed an idea of well-being life care recommendation. From the experiment with actual drivers, we demonstrated that the proposed method accurately estimate the user's degree of negative feelings even though it does not require a self-survey.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.270-284
• /
• 2016

The purpose of this study was to understand the essential structure and meaning of self-management intervention for breast cancer survivors by using non-pharmacological approaches. The study participants were 10 breast cancer survivors who were completing cancer treatment that involved surgery, chemotherapy, and radiation therapy. Data collected between August 2014 and February 2015 at E Hospital in S city were analyzed by using Colaizzi's phenomenological method. Outcomes were classified into seven essential themes: 1) application of comfort measures to alleviate ongoing symptoms, 2) movement to change physical conditions, 3) special herbal intake to prevent recurrence, 4) a specially designed diet plan for health self-management, 5) constant awareness of complementary and alternative medicine, 6) unmet needs treated by one's own doctor's prescription, and 7) future life toward a nature-friendly environment. The study results contribute to a deeper understanding of self-management interventions in the daily lives of Korean breast cancer survivors. In addition, results provide an essential resource, based on actual self-management styles, that will help survivors to obtain guidance and participate in appropriate programs.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.101-114
• /
• 2007

Dowel bars in the jointed concrete pavement are used to both provide load transfer across pavements joints and prevent the joint faulting leading to longer service life. On the contrary, the misplacement of dowel bar can provide negative results including the joint freezing(locking) that may cause the joint spatting and unexpected mid-slab cracking. The dowel bar can be placed using the assembly or dowel bar inserter (DBI) during the concrete pavement construction. In the domestic practice of the concrete pavement construction, the dowel bar is placed using the assembly method. This study primarily focuses on the comparison of these two dowel placement methods using the field data from the KHC test road in which both dowel placement methods have been applied to a certain length of the concrete pavement. The field data regarding the alignment of the dowel bars placed by both methods was collected using MIT-SCAN2, a nondestructive measuring equipment, and processed to compute Joint Score and Running Ave. Joint Score which are used as indicators of the dowel bar performance. The comparison of the methods for the dowel bar placement using these indicators shows that the DBI method provided much better alignment of the dowel bars reducing the risk of joint freezing than the assembly method. In order to improve the quality of the dowel bar placement using the assembly method, the current weak points of the assembly method including the fabrication, storage, and installation of dowel bar assembly were investigated and the solution was suggested. The improved dowel bar sets based on the suggested solution have been applied to an actual practice of the concrete pavement construction. The field data shows that the improved assembly method suggested in this study can highly reduce the risk of joint freezing.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.170-202
• /
• 2001

Simulation is used to reduce a risk involved in the new project and decision-making in an organization and to save cost and time by forecasting different situations. The objectives of this research are to acknowledge the need of simulation through the real life sample and to encourage the use of the simulation method in the future consulting project by continuously making the necessary improvements. This research analyzed the effectiveness of the simulation based on the sample use of simulation method in 1994 and 1997 for the BPR project of certification issuance process at the Supreme Court. In order to evaluate the value of the proposed simulation model, we examined the gap, which existed between the simulation result and the operational data collected by visiting the actual sites where AROS (Automated Registry Office System: automation system developed by LG-EDS Systems) is being utilized. We also identified the causes for the existing gap. According to the analysis result, (1) the gap came from the status change of thinking that the concentration of certification issuance request has eased after the computerization, (2) the gap existed in the operational process because they failed to consider the situational factors of each registry office in the simulation model, and (3) lastly the gap came from the difficulty of formulating the mathematical model for predicting the complex and diverse behavior pattern of individuals requesting the certification issuance. In order to narrow the existing gaps, we made a proposal to improve the certification issuance process where software of certification issuance vending machine was upgraded in order to help the people to use the service conveniently, more part time workers were hared when there was a overload of certification issuance request, and the quality of the certification Issuance vending machine is improved, In this research, we examined an efficient way of resource allocation based on the simulation conducted in 1994 and 1997. By reflecting changes since the simulation of 1994 and allocating the clerk and machine based on the predicted results of the simulation, we maximized the efficiency of the certification issuance process. In conclusion, this research examined the future usability of simulation method based on the analysis result and identified the key issues to consider when using the simulation method in the future consulting project.