• 천문학회보
• /
• 제42권2호
• /
• pp.59.4-59.4
• /
• 2017

We present a way of quantitatively characterizing solar active regions on the basis of their evolutionary paths. To determine characteristic properties of active regions with different sizes and configurations, we use a physics-based model to derive a relation between emerged magnetic flux and injected magnetic helicity (Flux-Helicity relation), the former of which gives scale information while the latter represents the magnetic field configuration of an active region. We demonstrate how this relation provides evolutionary paths of active regions and determines their characteristic properties, through a comparison with modeled active regions obtained from magnetohydrodynamic simulations.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1442-1447
• /
• 2012

In this paper, direct power control system for three-phase PWM AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the Reduced-order flux observer using the actual currents and the command control voltage. The source voltage sensors are replaced by a flux estimator. The active and reactive powers estimation are performed based on the estimated flux and Phase anble. The proposed algorithm is verified through simulation and experiment.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.566-574
• /
• 2013

In this paper, direct power control system for three-phase PFC AC/DC converter without the source voltage sensors is proposed. The sinusoidal input current and unity effective power factor are realised based on the estimated flux in the observer. Both active and reactive power calculated using estimated flux. The estimation of flux is performed based on the reduced-order virtual flux observer using the actual currents and the command control voltage. Moreover, source voltage sensors are replaced by a estimated flux. DC output voltage has been compensated by DC output ripple voltage estimation algorithm. The active and reactive powers estimation are performed based on the estimated flux and Phase angle. The proposed algorithm is verified through simulation and experiment.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.21-27
• /
• 2013

The present study explored the way to desalinate seawater for agricultural irrigation using forward osmosis (FO) process using liquid fertilizer as draw solution. FO experiments were performed in a cross flow mode using flat sheet FO membrane. The effect of membrane orientation, flow rate, and draw solution concentration on the performance of forward osmosis was investigated by measuring water flux of forward osmosis membrane. The water flux when the draw solution was placed against the membrane active layer was lower than the water flux when the feed solution was placed against the membrane active layer. This results indicated that the decrease of effective osmotic pressure by dilutive internal concentration polarization was less than that by concentrative internal concentration polarization. Increasing flow rate from 66.7 to 133.1 $cm^3$/min resulted in increase of the water flux when the membrane active layer orient to draw solution and feed solution, respectively. The reduction of resistance to water flow increased water flux at higher flow rate. The water flux of FO membrane increased with increasing draw solution concentration from 10000 to 30000 mg/L. The water flux for $KH_2PO_4$ draw solution was similar to that for commercial fertilizer. Optimization of FO process would contribute to economically desalinate brackish water for agricultural use.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.26-31
• /
• 2014

Conventional TIG(C-TIG) welding process guarantees higher quality weldment when compared with other processes. However, C-TIG with inherent low penetration shows disadvantages in productivity, especially for thick-walled structure. To overcome these handicaps, active-flux TIG(A-TIG) welding has been introduced and studied widely in a motivation to improve both quality and productivity. Present study made a focus on optimum combination of oxide components to enhance arc contraction and penetration. Results indicated that arc contraction inducing enhancement of penetration could be possible when composition of active fluxes was well matched with base metal.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.587-592
• /
• 2013

In this paper, the performance improvement of the sensorless control of IPMSM employing the active flux concept by the improved current estimator is presented. The accuracy of the current estimator used in a previous report is degraded when the motor parameters are not known exactly. A simple current estimator derived from estimated flux is proposed to improve the position estimation performance. In order to show the usefulness of the proposed estimation method, the simulation results using Matlab/Simulink and the experiment results are presented.

• 천문학회지
• /
• 제52권4호
• /
• pp.89-97
• /
• 2019

We demonstrate the subsurface origin of the observed evolution of the solar active region 10930 (AR10930) associated with merging and breakup of magnetic polarity regions at the solar surface. We performed a magnetohydrodynamic simulation of an emerging magnetic flux tube whose field-line twist is asymmetrically distributed along its axis, which is a key to merging and fragmentation in this active region. While emerging into the surface, the flux tube is subjected to partial splitting of its weakly twisted portion, forming separate polarity regions at the solar surface. As emergence proceeds, these separate polarity regions start to merge and then break up, while in the corona sigmoidal structures form and a solar eruption occurs. We discuss what physical processes could be involved in the characteristic evolution of an active region magnetic field that leads to the formation of a sunspot surrounded by satellite polarity regions.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.230-235
• /
• 1996

The new concept of dry area formation based on Poisson distribution of active nucleation sites and the concept of the critical active site density is presented. A simple statistical model is developed to predict the change of slope of the boiling curve up to critical heat flux (CHF) quantitatively. The predictions by the present model are in good agreement with the experimental data. Also it turns out that the present model well explains the mechanism on how the surface wettability influences CHF.

• 천문학회지
• /
• 제47권3호
• /
• pp.105-113
• /
• 2014

We apply differential affine velocity estimator (DAVE) to the Solar Dynamics Observatory (SDO)/Helioseismic and Magnetic Imager (HMI) 12-min line-of-sight magnetograms, and separately calculate the injected magnetic helicity for the leading and the following polarities of nine emerging bipolar active regions (ARs). Comparing magnetic helicity flux of the leading polarity with the following polarity, we find that six ARs studied in this paper have the following polarity that injected more magnetic helicity flux than that of the leading polarity. We also measure the mean area of each polarity in all the nine ARs, and find that the compact polarity tend to possess more magnetic helicity flux than the fragmented one. Our results confirm the previous studies on asymmetry of magnetic helicity that emerging bipolar ARs have a polarity preference in injecting magnetic helicity. Based on the changes of unsigned magnetic flux, we divide the emergence process into two evolutionary stages: (1) an increasing stage before the peak flux and (2) a constant or decreasing stage after the peak flux. Obvious changes on magnetic helicity flux can be seen during transition from one stage to another. Seven ARs have one or both polarity that changed the sign of magnetic helicity flux. Additionally, the prevailing polarity of the two ARs, which injects more magnetic helicity, changes form the following polarity to the leading one.

• 멤브레인
• /
• 제24권5호
• /
• pp.367-374
• /
• 2014

본 연구에서는 LSCF/GDC (20 : 80 vol%) 복합 분리막 표면에 LSC/GDC (50 : 50 vol%) 활성층을 코팅한 후 활성층의 열처리 온도, 두께, 침투법을 이용한 STF 도입이 산소투과 특성에 미치는 영향을 고찰하였다. 활성층 도입은 복합 분리막의 산소 투과 유속을 급격히 증진시켰으며 이는 활성층 성분인 LSC/GDC (50 : 50 vol%)가 전자 전도성 및 표면 산소 분해 반응을 증진시켰기 때문이었다. 활성층의 열처리 온도가 $900^{\circ}C$에서 $1000^{\circ}C$로 증가한 경우, 산소 투과 유속은 증가하였고 이는 분리막과 활성층 사이 그리고 활성층의 결정입간 접촉이 증진하여 산소이온과 전자 흐름을 증진시켰기 때문으로 설명되었다. 코팅층의 두께가 약 $10{\mu}m$에서 약 $20{\mu}m$로 증가한 경우, 산소 투과 유속은 오히려 감소하였는데 이는 코팅층의 두께가 증가할수록 기공을 통한 공기 중의 산소 유입이 어려워지기 때문으로 설명되었다. 또한, 코팅층에 침투법을 이용하여 STF를 도입한 경우가 STF를 도입하지 않은 경우 보다 높은 산소 투과 유속을 보였는데 이는 도입된 STF가 산소 분해하는 표면 반응 속도를 촉진시키기 때문이다. 본 연구로부터 LSC/GDC (50 : 50 vol%) 활성층 코팅 및 특성 제어는 LSCF/GDC (20 : 80 vol%) 복합 분리막의 산소투과 증진에 매우 중요함을 확인하였다.