• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.549-551
• /
• 2016

In this paper, With the development of modern science and technology are Sheds to stay indoors rather than outdoors space it increased significantly compared to the past. And a wide variety of research about outdoor air quality until recently, efforts are underway but the issue of air quality in the room is the fact that all considered relatively lightly. As the contamination of the room air is polluted, unlike the natural environment, a large outdoor air dilution rate, the dilution rate is very low, once the contaminated air continuously circulating exerts a very bad influence on the health of people staying in the room. In this study, movement characteristics of the person living in a room, the air measuring device for the study of the active indoor environmental control system reflects the life form to measure the quality of the measured air in real time for transmitting the information to the user of the smart devices, alarm bot It was implemented and operational applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.277-284
• /
• 2023

It is not easy to implement an energy management system in an industrial complex where small businesses are scattered, so the method of collecting and adjusting energy-related data is mainly used. FEMS is a system that responds to the demand for a paradigm shift from a passive energy management method to an active energy management method using IoT and ICT. In this study, a factory energy management system(FEMS) is designed for small and medium-sized enterprises located in chemical industrial complexes. Efficiency was confirmed by reviewing energy saving measures and efficiencies through FEMS for the electric energy of facilities built in each company. The cost effectiveness of FEMS is created when it is utilized by responsible and empowered personnel within the business processes of the host company. Therefore, it is necessary to utilize EMS that can be applied to the planning, support, operation and evaluation, and continuous improvement of the energy management system to achieve corporate organization and energy management goals.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.709-716
• /
• 2005

Patients with cleft tip and palate present severe maxillary hypoplasia due to scar of lip and palate, often accompanied by compromised mastication, speech abnormalities. Sometimes maxillary hypoplasia persist even though active orthodontic treatment was done. In theses cases, patients born with cleft lip and palate will be potential candidates for maxillary advancement with bone grafting after growth to correct the functional deformities and improve aesthetic facial proportions. But, maxillary advancement using standard surgical approaches has several limitations : increased relapse tendency after maxillary advancement, necessity of additional bone graft and mandibular setback surgery. Distraction osteogenesis is current treatment modality to overcome these limitations, thus has become popular for treatment of maxillary hypoplasia associated cleft lip and palate, craniosyntosis. Especially, rigid external distraction, contrary to internal device, has advantages : better vector control of osteotomized segment, effective traction of the bony segments, the ease of the application and removal the distraction device. This study showed that relatively successful result could be generated by using rigid external distraction osteogenesis(RED) in the case of cleft lip and palate with severe maxillary hypoplasia, 6 years 7 months old.

• Journal of Adhesion and Interface
• /
• v.22 no.3
• /
• pp.91-97
• /
• 2021

By introducing an organic interlayer on the Parylene C dielectric surface, the electrical device performances and the operating stabilities of organic field-effect transistors (OFETs) were improved. To achieve this goal, hexamethyldisilazane (HMDS) and octadecyltrichlorosilane (ODTS), as the organic interlayer materials, were used to control the surface energy of the Parylene C dielectrics. For the bare case used with the pristine Parylene C dielectrics, the field-effect mobility (μ_FET) and threshold voltage (V_th) of dinaphtho[2,3-b:2',3'-f ]thieno[3,2-b]- thiophene (DNTT) FET devices were measured at 0.12 cm²V^-1s^-1 and - 5.23 V, respectively. On the other hand, the OFET devices with HMDS- and ODTS-modified cases showed the improved μ_FET values of 0.32 and 0.34 cm²V^-1s^-1, respectively. More important point is that the μ_FET and V_th of the DNTT FET device with the ODTS-modified Parylene C dielectric presented the smallest changes during a repeated measurement of 1000 times, implying that it has the most stable operating stability. The results could be meaned that the organic interlayer, especially ODTS, effectively covers the Parylene C dielectric surface with alkyl chains and reduces the charge trapping at the interface region between active layer and dielectric, thereby improving the electrical operating stability.

• The Korean Society of Law and Medicine
• /
• v.23 no.2
• /
• pp.119-139
• /
• 2022

Brain stimulation technology that administers electrical and magnetic stimulation to a brain has shown a significant level of possibility for treating a wide range of various neurological and psychiatric disorders. Depending on its nature, the technology is defined either as invasive or non-invasive, and deep brain stimulation (DBS) is one of the most well-known invasive brain stimulation technologies. Currently categorized as grade 4 medical device in accordance with Guideline On Medical Devices And Their Grades, a Notification of Ministry of Food and Drug Safety (MFDS), the DBS has been used as a stable treatment for several diseases. At the same time, the DBS technology has recently achieved substantial advancement, encouraging active discussions for its use from various perspectives. On the contrary, debates over legal regulation related to the use of DBS has relatively been smaller in numbers. In this context, this article aims to 1) introduce the DBS technology and its safety in setting out the tone; 2) touch upon major legal issues that would potentially rise from its use for four different purposes of treatment, clinical study, areas of non-standard treatment where no other methods are available, and enhancement; and finally 3) highlight disputes concerning common emerging issues observed in the aforementioned four purposes from the viewpoint of legal responsibility and liability of using the DBS, which are benefit-risk assessment, physicians' duty of information, patients' capacity to consent, control for device, and insurance coverage.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.79-86
• /
• 2017

Ballast water filled into and discharged from the ballast tank of a ship has a negative impact on local marine environment due to various aquatic organisms contained therein. The IMO developed and adopted "The International Convention for the Control and Management of Ships Ballast Water and Sediments, 2004" with the purpose of protecting the marine environment from transfer of harmful aquatic organisms in ballast water carried by ships. The IMO BWM Convention was approved in September 2016 and ships must be equipped with ballast water management system after September 2017. Ships' ballast water treatment methods are divided into using active substances as electrolytic type, ozone type, chemical dosing type and using physical treatment type as filter type, ultraviolet type. It is also used with a combination of two methods. Electrolysis is superior in terms of cost and efficiency. In this study, basic principles, components, and land base test contents of electrolysis ballast water treatment system, a direct electrolyzed ballast water treatment system, were examined. Land base test was conducted with 300m3/h capacity device at the KIOST Geoje plant where the government test facility was installed. This test validated that the system meets IMO standards.

• Journal of Digital Contents Society
• /
• v.13 no.1
• /
• pp.101-110
• /
• 2012

Recently, social network sites are very popular with the enhancement of mobile device function and distribution. This gives rise to the registrations of the people on the social network sites and the usage of services on the social sites is also getting active. However, social network sites' venders do not provide services enough compared to the demand of users' to share contents from diverse roots by users effectively. In addition, the personal information can be revealed improperly in processes sharing policies and it is obvious that it raises a privacy invasion problem when users access the contents created from diverse devices according to the relationship by policies. However, the existing methods for the integration management of social network are weak to solve this problem. Thus, we propose a model to preserve user privacy, categorize contents efficiently, and give the access control permissions at the same time. In this paper, we encrypt policies and the trusted third party classifies the encrypted policies when the social network sites share the generated contents by users. In addition, the proposed model uses the RCBAC model to manage the contents generated by various devices and measures the similarity between relationships after encrypting when the user policies are shared. So, this paper can contribute to preserve user policies and contents from malicious attackers.

• Journal of Korea Multimedia Society
• /
• v.14 no.3
• /
• pp.414-422
• /
• 2011

The paper is for top and bottom symmetrical phase controlled loop antenna using for multi-media devices. We developed a top and bottom phase control loop pattern arrangement methods for loop antenna in mobile devices like as a cell phone and PCS, WCDMA. In the loop antenna pattern, arrange close adhesive the loop antenna pattern $180^{\circ}$ cycle in wave length, the radiated electro-magnetic wave from close adhesive loop pattern in $180^{\circ}$ become to coherent wave than the phase controlled loop antenna has high efficiency and high radiation gain. To acquire a wide band width on phase controlled loop antenna, we arrange a top and bottom symmetrical architecture loop pattern that bas a $180^{\circ}$ wave length in each layer. Top and bottom each layer bas a U form pattern separated $90^{\circ}$ wave length each other. This architecture cause a well balanced electro-magnetic flow control that acquired wide bandwidth resonance response in loop pattern antenna. In experiment, we designed a WCDMA mobile multi-media antenna in $40mm{\times}6mm$ area thickness 0.2mm, in that passive experiment the radiation efficiency is over 50% and over 0dBi radiation average gain was acquired, in the active experiment in real multi-media device we acquired -4dBi average gain and 43% transmit/receive efficiency.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.353-359
• /
• 2020

In this study, the controller structure and control algorithm of medical robot bed developed for pressure ulcer prevention and healing are described. The existing pressure ulcer prevention mattress is operated manually and the remaining maximum body pressure exceeds the pressure of ulcer generation, so there is always room for pressure ulcers. However, the system developed in this study does not generate the pressure ulcers because the body pressure drops to zero when the keyboard of the bed descends using the active electric driving keyboard. In addition, even if the bed is raised and the pressure above the critical body ulcer pressure is abnormal, the device and the control algorithm are designed so that the lasting time is within the pressure ulcer generation critical time and the pressure ulcer itself is not generated. The bed key board motor is a motor designed with the BLDC servos suitable for medical use and these can communicate each other easily through CAN(Car Area Network). The system is new medical robot bed that is effective in preventing pressure ulcers and will be distributed to many patients suffering from pressure ulcers.

• Journal of Hospice and Palliative Care
• /
• v.7 no.2
• /
• pp.189-199
• /
• 2004

Purpose: Despite the small incidence, head and neck cancer may cause a wide range of physical transformation by surgical operation, damage to active functions such as eating and speaking. It may provoke hopelessness, change self-esteem and self-concept after its operation, influencing the quality life of head and neck cancer patients. Thus nursing intervention should be developed to provide supportive nursing for head and neck cancer patients and play roles as competent supporters. Methods: This study was a nonequivalent, control group, pretest-posttest, non-synchronized quasi-experimental research designed to determine how supportive nursing intervention effects on hopelessness, self-esteem and self-concept of head and neck cancer patients. Subjects of the study included 40 adult inpatients of K University hospital in Pusan who were diagnosed as having head and neck cancer and operated. They were divided into experimental and comparison groups, each consisting of 20 members. The data were collected during the period from December 1, 1999 to April 11, 2000. Tools of the study included the protocol of supportive nursing intervention which was developed by researcher by means of reference, literal review and expert's advice. The measurement tool of hopelessness was translated by Won was the device of hopelessness self-evaluation from Beck, the tool for self-esteem measurement was developed by Rosenberg and translated by Kim, and the device of self-concept used by Lee et al, modified by Lee were used respectively. Data were analyzed using the SPSS/PC 9.0 program. The homogeneity of the subjects were tested using $x^2-test$ and t-test. 3 hypotheses were tested using t-test. Results: The results of the study can be summarized as follows. 1. The third hypothesis that the experimental group receiving supportive nursing intervention showed a little hopelessness than the control group not receiving supportive nursing intervention was supported (t=4.550, P=.000). 2. The third hypothesis that the experimental group receiving supportive nursing intervention showed more self-esteem than the control group not receiving supportive nursing intervention was supported (t=-6.40, p=.000). 3. The third hypothesis that the experimental group receiving supportive nursing intervention showed more self-concept than the control group not receiving supportive nursing intervention was supported (t=-6.065, P=.000). Conclusion: Supportive nursing intervention was effective nursing intervention strategy for reducing hopelessness and increasing self-esteem and self-concept of head and neck cancer patients. Then the quality of life of head and neck cancer patients can be enhanced by providing supportive nursing intervention in nursing practice.