• Title/Summary/Keyword: active collection

Search Result 348, Processing Time 0.028 seconds

A Study on the Experimental Fabrication and Analysis of MOS Photovoltaic Solar Energy Conversion Device (MOS 광전변화소자의 식적에 관한 연구)

  • Ko, Gi-Man;Park, Sung-Hui;Sung, Man-Young
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.33 no.6
    • /
    • pp.203-211
    • /
    • 1984
  • MOS silicon solar cells have been developed using the fixed (interface) charge inherent to thermally oxidized silicon to induce an n-type inversion layer in 1-10 ohm-cm p-type silicon. Higher collection efficiencies are predicted than for diffused junction cells. Without special precautions a conversion efficiency of 14.2% is obtained. A MOS silicon solar cell is described in which an inversion layer forms the active area which is then contacted by means of a MOS grid. The highest efficiency is obtained when the resistivity of the substrate is high.

  • PDF

A Study on the Fabrication of Porous Nickel Substrates Using Graphite Powder (흑연분말을 이용한 다공성 니켈지지체의 제조에 관한 연구)

  • 박성용;백지흠;조원일;조병원;윤경석
    • Journal of the Korean institute of surface engineering
    • /
    • v.28 no.5
    • /
    • pp.276-288
    • /
    • 1995
  • A nickel mesh and an expanded nickel sheet were used as a current collector for supporting active materials of cathode in rechargeable batteries, while a porous nickel substrate was extensively studied because of its 3-dimensional structure which has high capabilities for active materials and current collection. Optimum coating conditions were studied by SEM and two step d. c. constant current electrolysis for the graphite coating and electro-plated nickel on an urethane substance which was highly porous and 3-dimensional structure. The density and the porosity of nickel support obtained by using two step current density and 80 ppi urethane substance were 0.38∼0.40 g /㎤ and 94∼96%, respectively. It was possible to fabricate a highly porous and good packable nickel substrate using two step current density and surfactants at sulfamic acid nickel plating bath.

  • PDF

Active DSRC ETC System (능동형 DSRC ETC 시스템)

  • Yi Ji-Hun;Byeon Woo-Sub;You Heung-Ryeol
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2002.08a
    • /
    • pp.220-230
    • /
    • 2002
  • 고속으로 주행하는 차량으로부터 차량의 일시정지함이 없이 자동으로 통행요금을 징수하기 위한 ETC(Electronic Toll Collection, 통행요금자동징수)서비스는 전용의 무선통신방식, 전자지불수단, 암호화, 영상인식, 실시간제어등의 다양한 기술을 필요로 한다. KT ETC 시스템은 능동형 DSRC(Dedicated Short Range Communication, 단거리전용통신)를 이용한 상용의 ETC 시스템이다. 본 논문에서는 KT ETC 시스템의 개발과 관련하여 핵심 기술인 능동형 DSRC와 ETC 서비스를 위한 스마트카드 기술등을 소개하고, KT ETC 시스템에 고유한 ETC 서비스 처리절차를 소개한다.

  • PDF

A Study on Development of Network Advertising Service through Internet (인터넷을 통한 네트워크 광고 서비스 구축에 관한 연구)

  • Lee, Hee-Nahm;Lee, Chang-Ho
    • IE interfaces
    • /
    • v.13 no.4
    • /
    • pp.599-607
    • /
    • 2000
  • In recent days, Internet advertising effects are expanded by the steep increase of the Internet users and the extension of the advertising market will be accelerated through Internet. This paper indicates the importance of Internet advertising and suggests the solution of a network advertising service. The system is divided into an Advertise Server, an Advertiser and a Web Publisher. This study proposes both the collection and the analysis of traffic data in real time. Also, the banner advertising frames not for sale purpose are levelled for the impression using the solution for the banner exchange engine. In addition, with developing the advertising service system by using Active Server Pages, the newest language of server side script will be able to lead the additional supplement of more various profitable functions when it is considered the rapid increment of Active Server Pages.

  • PDF

A Study on the Fabrication of Porous Nickel Substrates (다공성 니켈지지체의 제조에 관한 연구)

  • 신동엽;조원일;백지흠;조병원;강탁;윤경석
    • Journal of the Korean institute of surface engineering
    • /
    • v.28 no.3
    • /
    • pp.123-132
    • /
    • 1995
  • While a nickel mesh and an expanded nickel sheet are used as current collectors for supporting active anode materials in rechargeable batteries, a porous nickel substrate is studied extensively for its 3-dimensional structure which has high capabilities for active materials and current collection. Optimum plating conditions were studied by polarization measurement. Scanning Electron Microscopy (SEM) showed that both electroless-and electro-plated nickel on an urethane substrate were highly porous and consisted of nearly spherical pores. The diameter and the channel size of the pores were found to be 300~500 $\mu\textrm{m}$ and 50~200$\mu\textrm{m}$, respectively. The shape of skeleton resembled a triangular prism with length extending about 50~100 $\mu\textrm{m}$.

  • PDF

A Development Method of Framework for Collecting, Extracting, and Classifying Social Contents

  • Cho, Eun-Sook
    • Journal of the Korea Society of Computer and Information
    • /
    • v.26 no.1
    • /
    • pp.163-170
    • /
    • 2021
  • As a big data is being used in various industries, big data market is expanding from hardware to infrastructure software to service software. Especially it is expanding into a huge platform market that provides applications for holistic and intuitive visualizations such as big data meaning interpretation understandability, and analysis results. Demand for big data extraction and analysis using social media such as SNS is very active not only for companies but also for individuals. However despite such high demand for the collection and analysis of social media data for user trend analysis and marketing, there is a lack of research to address the difficulty of dynamic interlocking and the complexity of building and operating software platforms due to the heterogeneity of various social media service interfaces. In this paper, we propose a method for developing a framework to operate the process from collection to extraction and classification of social media data. The proposed framework solves the problem of heterogeneous social media data collection channels through adapter patterns, and improves the accuracy of social topic extraction and classification through semantic association-based extraction techniques and topic association-based classification techniques.

High performance of inverted polymer solar cells

  • Lee, Hsin-Ying;Lee, Ching-Ting;Huang, Hung-Lin
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2015.08a
    • /
    • pp.61.2-61.2
    • /
    • 2015
  • In the past decades, green energy, such as solar energy, wind power, hydropower, biomass energy, geothermal energy, and so on, has been widely investigated and developed to solve energy shortage. Recently, organic solar cells have attracted much attention, because they have many advantages, including low-cost, flexibility, light weight, and easy fabrication [1-3]. Organic solar cells are as a potential candidate of the next generation solar cells. In this abstract, to improve the power conversion efficiency and the stability, the inverted polymer solar cells with various structures were developed [4-6]. The novel cell structures included the P3HT:PCBM inverted polymer solar cells with AZO nanorods array, with pentacene-doped active layer, and with extra P3HT interfacial layer and PCBM interfacial layer. These three difference structures could respectively improve the performance of the P3HT:PCBM inverted polymer solar cells. For the inverted polymer solar cells with AZO nanorods array as the electronic transportation layer, by using the nanorod structure, the improvement of carrier collection and carrier extraction capabilities could be expected due to an increase in contact area between the nanorod array and the active layer. For the inverted polymer solar cells with pentacene-doped active layer, the hole-electron mobility in the active layer could be balanced by doping pentacene contents. The active layer with the balanced hole-electron mobility could reduce the carrier recombination in the active layers to enhance the photocurrent of the resulting inverted polymer solar cells. For the inverted polymer solar cells with extra P3HT and PCBM interfacial layers, the extra PCBM and P3HT interfacial layers could respectively improve the electron transport and hole transport. The extra PCBM interfacial layer served another function was that led more P3HT moving to the top side of the absorption layer, which reduced the non-continuous pathways of P3HT. It indicated that the recombination centers could be further reduced in the absorption layer. The extra P3HT interfacial layer could let the hole be more easily transported to the MoO3 hole transport layer. The high performance of the novel P3HT:PCBM inverted polymer solar cells with various structures were obtained.

  • PDF

Body Image and Cosmetic Image Based on Women's Sex Role Identity (성인여성의 성역할 정체감에 따른 신체 및 화장이미지)

  • Kim, Yong-Sook
    • Journal of the Korean Society of Costume
    • /
    • v.59 no.3
    • /
    • pp.55-56
    • /
    • 2009
  • The purpose of this study was to analyse body and cosmetic image according to women's sex role identity. The subjects of this study were 433 women over 20 years old. Self-administered questionnaires were used for data collection. SPSS(Ver. 15.0) was used for mean, median, frequency, percentages, factor analysis, and one-way ANOVA. The results of this study were as followed; First, women were clustered into 4 groups according to their sex role identity. 36.5% was classified as an androgynous group, 32.4% was a undifferentiated group, 16.1% was a masculine group, and 15.0% was a feminine group. Second, factors of women's body image were interest in appearance, interest in weight, and charming of appearance. Factors of cosmetic image were natural & sociable, urban & intellect, passionate, romantic, prestige & sophisticate, fashionable & splender, active, feminine, and formal. Third, Androgynous group showed much interests in appearance and charming of appearance, but undifferentiated group had low interests. Androgynous group pursued natural & sociable, urban & intellect, passionate, romantic, prestige & sophisticate, fashionable & splendor, active, feminine, and formal images most when they applied make-ups. Masculine group pursued urban & intellect and active images much and femme group pursued natural & sociable, feminine, and formal images much. However undifferentiated group pursued all factors of cosmetic images less. Forth, androgynous group applied more kinds of cosmetics, but undifferentiated group applied less.

A Study on the Active Traceback Scheme Respond ing to a Security Incident (침해사고 대응을 위한 능동적 역추적 기법에 관한 연구)

  • Park Myung Chan;Park Young Shin;Choi Yong Rak
    • Journal of the Korea Society of Computer and Information
    • /
    • v.10 no.1 s.33
    • /
    • pp.27-34
    • /
    • 2005
  • Current security reinforcement systems are Passive defense system that only blocks filter to all traffic from the attacker. So, Those are weak re-attack and Stepping Stones attack because active response about attacker is lacking. Also, present techniques of traceback need much time and manpower by log information collection and trace through the personal inspection and active response is lacking. In this paper, We propose technique for TCP connection traceback that can apply in present internet and trace to inserted marking on IP header to correspond re-attack and Stepping Stones attack. Therefore, Proposed technique is unnecessary correction of existing network component and can reduce size of marked information and overhead of resources.

  • PDF

A Study on the Utilization of Arbitration in the Change of International E-commerce (국제 전자상거래 변화에 따른 중재활용방안)

  • Eun-Bin Kim;Choong-Lyong Ha
    • Journal of Arbitration Studies
    • /
    • v.33 no.4
    • /
    • pp.69-87
    • /
    • 2023
  • This study recognizes that consumers are becoming important as a subject of commerce as they change from the existing e-commerce market to the consumer-led e-commerce market, and proposes the use of consumer intervention as a remedy for consumer damage in international e-commerce disputes. In Korea, there is no separate regulation on consumer arbitration, so we will analyze the U.S. arbitration judgment, which is the most active in consumer arbitration, and examine it through the U.S. arbitration judgment so that arbitration can become active as a remedy for consumer disputes in Korea. In summary, in the event of a dispute between consumers and companies through e-commerce, consumers' preference for arbitration was confirmed through repeated collection of opinions without coercion. It is necessary to revitalize arbitration in Korea to protect consumers through arbitration rather than litigation and to resolve disputes through active alternative dispute resolution as a solution to disputes in e-commerce, which is rapidly increasing through U.S. consumer arbitration cases. The topic of the activation of arbitration has been mentioned a lot before, but the preference for arbitration is still lower than that of litigation. However, from now on, as the appearance of existing commerce has changed to consumer-led e-commerce, it has proposed a plan to use arbitration to rescue consumers from damage as consumers as buyers grow in the market.