• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.484-484
• /
• 2009

반도체 소자가 차세대 초미세 공정 기술 도입의 가속화를 통해 고속화 및 고집적화 되어 감에 따라 나노 (nano) 크기의 회로 선폭 미세화를 극복하고자 최적의 CMP (chemical mechanical polishing) 공정이 요구되어지고 있다. 최근, 금속배선공정에서 높은 전도율과 재료의 값이 싸다는 이유로 Cu를 사용하였으나, 디바이스의 구조적 특성을 유지하기 위해 높은 압력으로 인한 새로운 다공성 막(low-k)의 파괴와, 디싱과 에로젼 현상으로 인한 문제점이 발생하게 되었다. 이러한 문제점을 해결 하고자 본 논문에서는 Cu의 ECMP 적용을 위해 LSV (Linear sweep voltammetry)법을 통하여 알칼리 성문인 $NaNO_3$ 전해액과 산성성분인 $HNO_3$ 전해액의 전압 활성화에 의한 active, passive, transient, trans-passive 영역을 I-V 특성 곡선을 통해 알아보았고, 알칼리와 산성 성분의 전해액이 Cu 표면에 미치는 영향을 SEM (Scanning electron microscopy), EDS (Energy Dispersive Spectroscopy), XRD(X-ray Diffraction)를 통하여 전기화학적 특성을 비교 분석하였다.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.180-185
• /
• 1985

The alkali refined rice bran oil (ARBO) and the esterified rice bran oil (ERBO) with glycerol were compared for their thermal stabilities at $150^{\circ}C$ and $180^{\circ}C$, respectively. The acid value gradually increased in ARBO during heating period but increased slowly in ERBO-2 and declined gradually in ERBO-1. The peroxide value was somewhat fluctuated during heating period, and the maximum peroxide value in all samples was 13.3 meq/kg. TBA value was sharply increased for the first 10 hr. heating and slowed down thereafter for all samples but ERBO were intensely colored after the heat treatment. The TG ratio of the oils after 90 hr. heating was not different at $150^{\circ}C$ but ERBO was 2-7% higher ratio of TG than ARBO at $180^{\circ}C$. The oxidative stability of ARBO was twice higher than ERBO according to the result of active oxygen test.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.1 no.1
• /
• pp.31-37
• /
• 1977

The effects of surfactants and concentration of NaOH in surfactant solution on the removal of free fatty acid soil from cotton fabrics were investigated. Cotton fabrics were soiled with palm itic acid which is the most common fatty acid found in natural oily soil and washed in Lauder-ometer with various types of surfactant with or without NaOH. The rate of soil removal was estimated by analyzing palmitic acid contents in fabric before ar d after washing. Analysis of palmitic contents was made by extracting palmitic acid with azeotropic mixture of alcohol-benzene and the extracts were titrated with standard NaOH solution. It was shown that the types of surfactant are important factor in free fatty acid removal and the efficiency increases in the following order: SLS$90\%$ of initial sorption. In relation to the mechanism of detergency, the suspending and emulsifying power of surfactants were also examined. From the results of this experiments, it could be concluded that the soap formation with alkali and the suspending power of surfactant arc significant factors in free fatty acid soil removal, but the emulsifying power of it is neglizible.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.4
• /
• pp.255-264
• /
• 2021

Asian dust (Hwangsa) deposited on the surface of the Korean Peninsula is difficult to recognize their existence in mountainous terrain undergoing active erosion and weathering. This study examined Asian dust sediments mixed in soils by analysing clay mineralogy, mineral composition, and microtextures of fine silt (< 20 ㎛) in the alkali feldspar granite area of Seoraksan. The fine silt was composed of detrital particles derived from bedrocks, Asian dust sediments, and their weathering products. Clay minerals of 2:1 structural type, chlorite, amphibole, epidote, and Ca-bearing plagioclase were identified as eolian mineral particles. During the weathering of the bedrock composed of quartz and alkali feldspars, albite was partially weathered to produce small amounts of gibbsite and kaolin minerals. Hydroxy-Al interlayered clay minerals were formed by the exchange and fixation of polynuclear Al cationic species into the interlayers of expandable 2:1 clay minerals dominated by illite-smectite series clay minerals. Contribution of Asian dust to the fine silt of soils was estimated around 70% on the basis of total contents of 2:1 phyllosilicates.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.460-465
• /
• 2019

In this study, the optimization of active materials and the preparation of particulate adsorbents for the application of metal oxide-based adsorbents for the treatment of $H_2S$, an air pollutant and odorant, occurred in various industrial facilities were investigated. The adsorbents were prepared by using $TiO_2$, which has a high physicochemical stability and relatively high specific surface area among metal oxides and also by different kinds and contents of active materials. The correlation between the physicochemical property and adsorption performance of the adsorbents confirmed that the adsorbent containing KI, which is a typical alkali metal among the active metals, showed the highest adsorption performance. The relationship between the contents and the adsorption performance was non-proportional, but a volcano plot. From XRD, SEM and BET analyses, it was confirmed that the active material was exposed to the surface above a certain amount and also the adsorption performance was the best when the specific surface area and pore volume were $40{\sim}100m^2/g$ and $0.1{\sim}0.3cm^3/g$, respectively. For practical application, the adsorbent was granulated or coated on a ceramic support. It was also confirmed that the adsorbent showed high adsorption performance when the adsorbent was coated on the ceramic rather than that of the granulated support.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.749-753
• /
• 1998

Methoxy polyoxyethylene dodecanoates, kinds of nonionic surfactants, could be obtained from addition of ethylene oxide (5, 7, 9, and 12mol) with fatty acid methyl ester utilizing solid catalyst, metal oxide. Because ethylene oxide (EO) couldn't react directly in acid or alkali catalyst with dodecanoic acid methyl ester (DME) that had no active hydrogen, the reaction to add EO was carried out using active solid catalyst. By using IR, HPLC and $^1H$ NMR analysis, structural confirmation of methyl polyoxy ethylene dodecanate showed high yield ranging from 93 to 97%. EO unit mol number of reacted products was 5.2, 7.1, 9.2 and 12.1 mol respectively. Also, EO adduct distrobution of ethoxylated methyl laurate (MPD) had normal distribution curve like polyoxyethylene alkyl ether (AE).

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.113-140
• /
• 1983

This is a study on a landscape planning along the street 1~4, which are gateways to Taegu city and an important scenery. Therefore, emphasis was given to provide a bright, clean and beautiful first impression to visitors and citizens. The area is being developed for education and athletic park. Plans to construct a fountain, pergolas and a pond were set up to complement the active and passive facilities to the existing a athletic facilities in the area. Since D part in the area have alkali soil (pH 8.1), soil amendment is necessary for successful growth of trees and ground covers. When the area is filled or added with new soil for soil amendment, it will be important to use fresh soil which can support plant growth. It will be ideal to use ground covers and shrubs on the existing retaining walls along the street for keeping natural vegetation and slope stability instead of further cutting and reconstruction. It is not reasonable in technical and economic sense to remove rocks of the slope for planting trees. In order to harmonize plant color distribute, tall needle and broad leaf trees in the background as a screen, flowering trees were arranged in groups at front, and annuals were mass-planted along the footway. Natural-form-trees will be planted because they not only serve as a greenbelt but also are more economics in maintenance than formative trees.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.486-486
• /
• 2009

In this paper, the current-voltage (I-V) curves, such as linear sweep voltammetry (LSV) and cyclic voltammetry (CV), were employed to evaluate the effect of electrolyte concentration on the electrochemical reaction trend. From the I-V curve, the electrochemical states of active, passive, transient and trans-passive could be characterized. And then, we investigated that how this chemical affect the process of voltage-induced material removal in electrochemical mechanical polishing (ECMP) of Copper. The scanning electron microscopy (SEM) and energy dispersive spectroscopy EDS) analyses were used to observe the surface profile. Finally, we monitored the oxidation and reduction process of the Cu surface by the repetition of anodic and cathodic potential from cyclic voltammetry (CV) method in acid- and alkali-based electrolyte. From these analyses, it was important to understand the electrochemical mechanisms of the ECMP technology.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.13-19
• /
• 2016

Moso Bamboo was investigated as the a raw material for pulp and paper industry. Soda-Anthraquinone (Soda-AQ) pulping, elemental chlorine free bleaching was applied. Yield of soda or soda-AQ pulp was 29.3-31.7% with Kappa number 33.0-22.8 with different cooking time or anthraquinone addition at 20% active alkali. In soda or soda-AQ pulping, 81-86% of xylan was removed, which was the main reason for lower pulp yield than hardwood species. Average fiber length of Moso Bamboo soda-AQ pulp was 1.36 mm with $15.5{\mu}m$ fiber width. Soda-AQ pulp from Moso Bamboo (P-3, lowest Kappa pulp) was bleached with 5.5-6.5% of chlorine dioxide charge as D0ED1 bleaching sequence. In 3-stages ECF bleaching, final brightness of 85.3% ISO was achieved with total chlorine dioxide 6.5%.